PROVN OF HT UG CABLE AND CONNECTED MISC WORK FOR AC PLANT FOR MSL SHED AT 2201 AP BIRPUR UNDER GE KALUCHAK

Amount

Supply, installation, testing and commissioning weather proof outdoor type HT electrical feeder piller box, factory fabricated and CPRI approved, made out of not less than 3.15 mm thick CRCA sheet, vermin/ dust/ weather proof with rain protection canopy on top, aesthetically designed, having at least IP-54 protection with front and rear side openings overall size 1200 x 900 x 600 mm having incoming and outgoing arrangement of HT cables, Aluminium strip 600 mm long of size 200 A rating mounted on 11000 V epoxy insulators and ..... Contd to Srl Item No 1.01

including MS angle iron base frame of size 50x50 x6 mm 30 cm grouted in ground & 60 cm above GL with necessary excavation, PCC 1:2:4, type B-2 foundation, complete with locking arrangement, powder coated in postmen red color shade chemical for rust protection complete with 11000V Danger notice board on front of the panel with PVC insulated sheathed stranded aluminium conductor cable of adequate size with suitable lugs, bolts, washers and duly cross marked with paint on front side and with proper locking arrangement complete connecting incoming & outgoing connections Complete all as specified and directed by Engr-in-Charge.

Supply and laying and testing cable XLPE insulated heavy duty 11000volts grade screened PVC bedded galvanised steel strip or wire armoured electric power cables flat or circular with stranded aluminum conductor of 3 core 120 sqmm size served laid in trenches,duct,through pipe line in floor on poles including jointing and testing complete all as specified and directed by Engineer in charge.

Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size120 sqmm to 185 sqmm complete all as specified and directed.

Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed.

Cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185sqmm., complete all as specified and as directed by Engr-in-Charge.

Excavating in trenches, not exceeding 1.5 m wide and exceeding 1.5 m in depth; for foundation, trenches for laying of cable etc. and getting out in any type of soil, complete all as specified and as directed by Engr-in-Charge.

Removing excavated material not exceeding. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil,complete all as specified and as directed by Engr-in-Charge.

Dry coarse sand as cushioning to under ground cable provided with layer of 8 cms deep before laying the cable and 15 cms deep after laying and stretching the cable, punned to 18 cm thick complete, all as specified and as directed by Engr-in-Charge. NOTE: only punned thickness shall be measured for payment purpose.

Sub class ‘B’ old size well burnt bricks, laid flat with width equal to length of brick in trenches as protection to cable complete all as specified and as directed.

SATISH AND CO

M/S BHATIA BUILDERS AND CONTRACTORS

RAVI KUMAR

Jiwan Singh

VEE ESS ENGINEERS

M/S RAJ ENGINEERS

DES RAJ NAGPAL CONTRACTORS PVT.LTD