Providing LWSS Suresh Pal in GP Khatnol Tehsil Suni Distt. Shimla HP

Amount

Excavation in foundation trenches etc.in earth work upto all depths in all kinds of soil such as pick work,jumper work,blasting and chiselling soft/hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of side levelling of bed to correct grade and returning the stacked soil in trenches in 15cm.layers by ramming and watrering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un metalled/metalled paved surfaces to its original conditions including caution boards in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:3:6(1cement:3 sand:6 graded stone agg.20mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:1/2 :3 (M 20) ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-

Foundation and footings etc. in all leads & lifts.

Walls(any thickness but not less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level in all leads & lifts.

Providing and laying cement concrete 1:2:4(1cement:2 sand:4 graded stone agg.20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete workin:-

Suspended floors,roofs,landing and shelves and their support balconies,beams,girders,bressumers,and cantilivers upto floor two level in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering ,strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling in all heights and removal of the same for insitu reinforced concrete and plain concrete workin:-

Flat surfaces such as soffits of suspended floors, roofs landings and the like: floors etc. up to 200 mm in thickness in all leads & lifts.

Vertical surfaces such as walls(any thickness)partitons and the like including attached pillasters,buttresses plinth and string courses and the like in all leads and lifts

Providing tor steel reinforcement for RCC work including bending,binding and placing in position compete upto floor two level in all leads and lifts.

Applying Birla white wall care putty over plaster surface after thoughly brshing the surface free from mortar drops,dust,loose,materails and other to give matters sand parpered smooth to give final matter finish to the surface complete.

Manufacturing MS Manhole Cover 600x450mm with frame of MS Angle 50x50x6mm and cover of black sheet 2.00mm thick complete with angle frames,flates etc. including welding with locking arrangements(Locks)(excluding Cement Concrete).

Providing in RCC work smooth finishing of the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand)complete in all leads and lifts.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position complete in grating, framed guards & ladders etc. ( V.M 50x50x6mm & H. M 25X25X4MM.)

Laying ,jointing and testing in trenches GMS tubes(light duty)tube fittings such as bends ,tees,union etc.as per direction and to the entire satisfaction of the engineer-in-charge.(Earth work in trenches to be measured and paid for separately) in all leads and lifts.

20 mm dia

25 mm dia

32 mm dia

50 mm dia

P/ F Brass fullway valve with hand wheel of superior quality.

20mm dia

25mm dia

32 mm dia

50 mm dia

Rakesh Kumar