Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-AOC E 159 CWE AF JODHPUR A I A II A V | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC Being lowest and overall reasonable. | |
| 2 | L2₹8.8 L+₹92,880 (11.8%)Rejected-AOC NO 2 16 KANGAYAMPALAYAM SULFUR PO COIMBATORE 641 401 | COIMBATORE | COIMBATORE | TAMIL NADU | 641401 | L2 | Rejected-AOC Not being lowest. | |
| 3 | L3₹9.1 L+₹1.2 L (15.8%)Rejected-AOC 3 165 1A KAMARAJ NAGAR KANGAYAMPALAYAM SULUR COIMBATORE TAMIL NADU 641 401 | COIMBATORE | COIMBATORE | TAMIL NADU | 641401 | L3 | Rejected-AOC Not being lowest. | |
| 4 | L4₹9.7 L+₹1.9 L (24.0%)Rejected-AOC C 150 ADG P CHENNAI | L4 | Rejected-AOC Not being lowest. | |
| 5 | L5₹9.7 L+₹1.9 L (24.1%)Rejected-AOC E 11 CWE WELLINGTON A I A II A V B I | KOLKATA | WEST BENGAL | 700001 | L5 | Rejected-AOC Not being lowest. |
Tender Value
₹9.9 L
EMD Value
₹19,760
Closing Date
12 Dec 2023, 6:00 pmClosed
Commander Works Engineers Wellington
Headquarters Commander Works Engineers Wellington, Barracks Post The Nilgiris PIN 643 231
PROVISION OF WIDENING OF ROAD FROM MI ROOM TO AMMUNITION POST AT MADUKKARAI MIL STATION UNDER GE WELLINGTON
2023_MES_627418_1
84992/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
MADUKKARAI
For MES Enlisted Contractors - Class E, Category a (v)
For other contractors Meeting Enlistment Criteria of MES for Class E, Category a (v)
7 documents required · 7 mandatory
₹500
GE WELLINGTON
₹19,760
29 Dec 2023
8 Nov 2023
14 Dec 2023
8 Nov 2023
12 Dec 2023
23 Nov 2023
9 Nov 2023 - 16 Nov 2023
Amount
Excavation over areas, not exceeding 1.5 m deep and getting out in Hard / Dense soil complete all as specified and directed.
Removing excavated material exceeding 50m and not exceeding 250m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Rolling, watering and consolidating formation of surfaces in cutting with power roller 8 to 12 tonne including filling in soft spots, depressions etc which occurred during rolling (for portion of cutting/ original ground only) to required camber and gradient including watering before and during rolling complete all as specified and directed.
Material and labour for soling (or sub base), spread thickness - 150mm, with broken boulders or quarried stone of size 100 to 50mm, deposited, spread, levelled in one layer, inter stices filled, surface formed, rolled and consolidated to required gradient and camber complete all as specified and directed.
Material and labour 150mm thick (compacted thickness) WBM, in two layers (75mm thick in each layer) with coarse aggregates (granite) of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.
Material and labour for preparing surface of WBM by brushing with wire brushes for removing cake, mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dust etc and applying evenly a priming / tack coat with bituminous primer @ 10 Kg per 10 Sqm complete all as specified and directed.
Bituminous premix Semi Asphaltic Dense Concrete 40 mm consolidated thickness with paving bitumen VG-30 with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne roller complete all as specified and directed
M&L for providing precast cement concrete type B1 1:2:4 using 20mm graded aggregate in CM 1:4 as in kerbs other than roof kerbs complete all as specified and directed.
M&L for Cleaning and preparing the road surfaces/existing or new painting surface of cement or bituminous surfaces and applying 2.5mm thick road marking painting with Reflective thermoplastic paint confirming to BIS 3262 (1989) of specified shade/ colour laid down through fully automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater n exc 10 cm wide complete all as specified and directed. Note:- i) Road marking paint shall confirm to MORTH 803.4 Ver III (Specification for thermoplastic road marking material). ii) The colour, width and layout of road markings shall be in accordance with the code of practice for road marking with paints, IRC:35.
S&F Cat eye's of size 100mm x 100mm x 20mm made of tough polycarbonate body with electronically welded prismatic retro reflective lenses on two sides for maximum retro reflection in wet and dry condition fixed with hot bitumen adhesive complete all as specified and as directed.
KSR AND COMPANY
Vishnu Infrastructures
S.RAMACHANDRAN
VENKATESH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .