Provn of Toilet Blocks (2 Nos) at Trg Area, Bathing Cherry (2 Nos) at IT Bn, Special Repairs to Bldg No P-43 and T-266 at MIRC under GE (S) Ahmednagar

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level all as specified and as directed.

Demolition of reinforced cement concrete of foundation, footing, plinth beams etc all as specified and as directed.

Dismantling kota stone slab of any desciption or thickness in floors etc laid bedded and pointed in any mortar all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 sq. m each all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Taking out old roof tretment and roughening the old concrete slab by picking, sweping clean and washing down with water to remove dust etc and disposal of rubbsh n exc 100m distance from starting point all as specified and as directed

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and as directed

Excavation over areas n exc 1.50m in deep and getting out in soft/loose soil all as specified and as directed.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, laying of cable/pipe etc. or for manholes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick with soil all as specified and as directed.

Removing excavated soil to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.

M&L for hardcore of broken stones of guage n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and as directed.

M&L for plain cement concrete, 1:4:8, type D2, using 40 mm graded stone aggregates as in foundations, filling and mass concrete all as specified and as directed.

M&L for RCC M-25, design mix, as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and as directed.

M&L for RCC M-25 design mix as in columns, pillars, piers, posts and struts all as specified and as directed.

M&L for RCC M-25, design mix, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

M&L for RCC M-25, design mix, as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement morrtar 1:6 complete all as specified and as directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete all as specified and as directed.

Use and waste of formwork to sides of slabs and similar work; exc 10cm but not exc 20cm wide for rough finished flat surfaces of concrete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete all as specified and as directed.

Taking down shutters of any description area exc 2Sqm each leaf and refixing in the same opening all as specified and as directed.

S&F 35 mm thick, second class hard wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F 35 mm thick, second class hard wood, plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.

S&F factory made solid PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panellng of plain colour PVC sheet to be fitted i the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined toghter with solvent cement and fixed to frame complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2mm prelam PVC sheet on back face and in frame all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with MS square tube, and fixed in opening all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 2mm thick 3D wood grain moulded PVC sheet sheet polyurethane painted on the front face and 2mm prelam PVC sheet on back face and in frame all as specified and as directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F 150mm aluminium barrel tower bolt of extruded section all as specified and as directed.

S&F aluminium handle anodised fabricated type of size 150 mm all as specified and as directed.

S&F in repairs aluminium handle anodised fabricated type of size 150 mm all as specified and as directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staples and fixing clips bolts etc length of bolt 250 mm all as specified and as directed.

S&F floor door stopper of aluminium alloy and tongue, anodised with hard drawn spring, overall length of cover plate 140mm all as specified and as directed.

S&F 300mm size, MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18 mm etc complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over and incl 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for mild steel windows with side hung shutters including projecting type hinges, steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specifed and as directed

M&L for steel windows/ventilators, fixed type with glazing bars complete all as specifed and as directed

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or rivetted or forged into spikes, framed guard bars and similar work conforming to Fe 290. Gde-165 complete all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W (Gde- E- 250) quality- A all as specified and as directed.

S&F mild steel rolled sections as in main and cross beams, posts, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleat or other connecting plates etc.Fe 410 -W (Gde- E- 250) quality- A all as specified and as directed.

S&F mild steel tubular frame work including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade all as specified and as directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and as directed.

M&L for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/ridges/valley gutters/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, parapet, chajja etc comprising with the following treatment/specification from bottom to top (i) Screed bed or bedding layer of 10 mm thick cement mortar 1:4 with mixing of WPC @ 3% by weight of cement, finished even and smooth without using extra cement (ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compound shall be measured & paid separately.

Supply only water proofing compound, ISI mark as aproved by GE all as specified and as directed.

M&L for special treatment to sunken portion with 10 mm thick rendering in cement mortar 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick in cement mortar 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling, floor area of WC/bath upto 1.5 Sqm etc. complete all as specified and directed. Note :- The rates include for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm complete all as specified and directed

M&L for 75mm thick cement concrete 1:4:8, type D2, using 40 mm graded stone aggregates as in sub base all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) as in plinth protection, finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

M&L for machine cudappah stone slab flooring, 20-25 mm thick laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles 7mm thick (plain or printed), area of each tile exc 0.11 sqm but n exc 0.18 sqm, shade as approved by GE, as on vertical surfaces like dado, skirting etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for vitrified coloured ceramic tiles, 10mm thick, (Square or rectangular), area of each tile not exceeding 0.36 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

All as per serial item No 66 but as in dado/skirting or on vertical surfaces laid over and including 10mm thick backing coat in cement mortar 1:4.

M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete sur-faces finished even and smooth with sagol finish complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished surfaces even and fair all as specified and as directed.

M&L for 5mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as in ceiling, finished surfaces even and smooth without using extra cement all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed

M&L for complete removal of existing treatment from ceiling and applying three coats of white wash all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and as directed

M&L for complete removal of existing treatment from walls and applying two coats of cement base paint over a coat of primer all as specified and as directed

M&L for 3 mm thick figured glass pin head type and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and as directed

M&L for preparing new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

S&F 15 mm bore GI tubing, medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 20 mm bore GI tubing, medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 25 mm bore GI tubing, medium grade with all fitting and fixed complete on walls and ceilings or laid in floors/trenches etc complete all as specified and as directed.

S&F 40 mm bore GI tubing, medium grade with all fitting and fixed complete on walls and ceilings or laid in floors/trenches etc complete all as specified and as directed.

S&F bib tap, 15 mm dia, cast copper alloy, chromium plated with capstan heads, fancy type, screwed down for iron pipe or for brass ferruleand fixed all as specified and as directed.

S&F in repairs bib taps, 15 mm dia, cast copper alloy chromium plated with capstan heads, screwed down for iron pipe or for brass ferruleand fixed all as specified and as directed.

S&F 20mm bore, stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix complete all as specified and as directed.

S&F in repairs 15mm bore stop cock, cast copper alloy, fancy type, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix complete all as specified and as directed.

S&F 15mm bore angle cock, cast copper alloy, fancy type, screwed down, high pressure with crutch or butterfly handle screwed both ends cup and washer for iron pipe or for union and fix complete all as specified and as directed.

S&F 15mm bore push cock, cast copper alloy, fancy type, screwed down, high pressure, capstan head, screwed both ends cup and washer for iron pipe or for union and fix complete all as specified and as directed.

S&F 15mm bore stop cock, cast copper alloy, fancy type, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix complete all as specified and as directed.

S&F 25mm bore gun metal or bronze globe valve, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed

S&F 40mm bore gun metal or bronze globe valve, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed

S&F in repairs PVC connections, 15 mm bore with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F brass chromium plated health faucet (Hand shower) with 1200mm long guarded flexible tube screwed one end, suitable for 15mm bore connection, wall mounted with and including hook for hanging arrangement all as specified and as directed.

S&F in repairs aluminium powder coated, decorative type curtain rod, 20mm dia complete all as specified and as directed.

S&F in repairs aluminium powder coated, decorative type curtain brackets, suitable for 20mm dia curtain rod fixed to the ends of curtain rails complete all as specified and as directed.

S&F tubular towel rail, brass chromium plated, 20 mm dia `D' type, 60 cm long between flanges all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, tripple layer, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and fixed including dismantling and taking down existing water tank of 500 lit capacity complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, tripple layer, hoisted and fixed in position including 25 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and fixed complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 5000 litres capacity, tripple layer, hoisted and fixed in position including 25 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and fixed complete all as specified and as directed.

S&F vitreous china bowl urinal, flat back of size 465mm x 355mm x 265mm, white (minimum), with grating and union for discharge pipe including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (minimum weight 60 gms), 32/40mm dia PVC flexible outlet , PVC connection 450mm long complete all as specified and as directed.

S&F vitreous china squatting pan, white, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap/flushing cistren complete all as specified and as directed.

S&F vitreous china wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F 10 litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle, PVC connection 450mm long, brackets etc complete all as specified and as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F vitreous china wash hand basin, white, flat back, size 580 mm x 400 mm, including brackets, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm dia waste coupling brass chromium plated with long screwed shanks and fly nuts, 32mm size brass chromium plated bottle trap inlet and outlet screwed for pipe or connections including necessary packing union and cap, 32/40mm dia PVC flexible outlet pipes, 15mm dia 450mm long PVC connection pipe complete all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white, flat back, size 550 mm x 400 mm, including brackets, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm dia waste coupling brass chromium plated with long screwed shanks and fly nuts, 32mm size brass chromium plated bottle trap inlet and outlet screwed for pipe or connections including necessary packing union and cap, 32/40mm dia PVC flexible outlet pipes, 15mm dia 450mm long PVC connection pipe complete all as specified and as directed.

S&F grating doom 100mm dia PTMT (minimum weight 25gms) all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floors complete all as specified and as directed

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floors complete all as specified and as directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and laid in trenches or in floors complete all as specified and as directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and fixed to walls complete all as specified and as directed

S&F in repairs 75 mm bore PVC (SWR) bends all as specified and as directed

S&F in repairs 110 mm bore PVC (SWR) bends all as specified and as directed

S&F 75 mm bore PVC (SWR) reducer all as specified and as directed

S&F 75 mm bore PVC (SWR) vent cowl all as specified and as directed

S&F PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement to waste pipe, including fixing in cement concrete type (1:2:4) type B1 complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement to waste pipe, including fixing in cement concrete type (1:2:4) type B1 complete all as specified and as directed.

S&F PVC (SWR) gully trap of 125/110mm, with grating including jointing with solvent cement to waste pipe, including fixing in cement concrete type (1:2:4) type B1 complete all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to 100mm/110mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to 200mm internal dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for 200 mm internal dia reinforced concrete pipes with collars, class NP2, laid and jointed complete all as specified and as directed.

S&F stainless steel plate rack of size 750mm x 600mmx 250mm, made out from 0.63mm thick SS steel sheet of grade AISI 304 (18/8) and fixed to wall with brass screws complete all as specified and as directed.

S&F in repairs, stainless steel sink with drain board made of 1mm thick sheet for kitchen including plugs, washers, 32/40 mm bore PVC flexible outlet pipes, cast iron cantilever brackets, connecting union to pipe, over all size 915 mmx 460 mm with bowl size 410 mm x 330 mmx 160 mm all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, bell push, holders, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

Taking down carefully, fittings and fixtures such as ceiling fittings, bulk head fittings, tube light fittings, DBs etc by unscrewing from boards, outlet boxes all as specified and as directed.

M & L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch . NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 126 but one 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per serial item No. 126 but on independent board.

All as per serial item No. 126 but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase,Neutral and earth for one 15 Amp, 6 pin socket on independent board.

All as per serial item No. 126 but one light point controlled by 2 way switches.

All as per serial item No. 126 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch NOTE :- 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2. All points shall be earthed up to fixtures i.e holdrs,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.3. Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc.

All as per serial item No. 132 here in before but one 5 Amp 3 pin socket outlet point on same board with other switches including earth wire as specified.

S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F socket outlet, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 5/15 Amps, 230V, AC. all as specified & as directed.

S&F bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.

S&F buzzer/ bell,, AC, 230 volts, single phase complete all as specified and directed.

S&F lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & as directed.

S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & as directed.

S&F fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, socket type, 230 volts, 450 watts, suitable for ceiling fan 1200/1400mm sweep all as specified and as directed.

S&F 300 mm sweep metallic exhaust fans, AC, single phase, 230/240 volt, with blades, frame and louvers including making hole in brick/stone masonry for fixing of exhaust fan and making good disturbed surfaces with cement mortar and cement plaster and applying two coats of distemper oil emulsion of same pattern/tint complete complete all as specified and as directed.

S&F ultra slim square profile LED lighting fixture with extruded polycorbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500k with uniform light output, with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed.

S&F Lumeno LED Bulb 10 Watt (Cool day light) having colour temp 6500 K and lumen output 900 suitable for B-22 type to fix on batten holder and wall light etc complete all as specified and as directed

M & L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.Three runs of 4 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

S&F MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB SPN, AC 240 V, 40 to 63 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F MCB TPN, AC 415 V, 40 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs ISOLATOR TPN, AC 415 V, 63 amps, 10 KA capacity ,'C' series, making connection with suitabl size of copper lugs etc complete all as specified and as directed.

S&F sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 4 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 12 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs, security light fitting of building with single piece new generation energy savng and environmental friendly, long life, LED 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable all as specified and as directed.

M&L earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with 8mm dia mild steel TMT bars @ 150mm centre to centre in both way, and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

M&L in repairs earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

S&F 32mm dia HDPE PIPE (PE 100,SDR-21, 6 Kgf/Sqcm) IS 4984-2016) for laying of LT cables etc complete with and including all accessories all as specified and directed.

S&F 50mm dia HDPE PIPE (PE 100,SDR-21,6 Kgf/Sqcm) IS 4984-2016) for laying of LT cables etc complete with and ncluding all accessories all as specified and directed.

Supply and laying in trenches/ducts/ fixing on pole/structure with suitable size of GI clamps made out of GI strip 32 mm x 6 mm , 1100 Volts grade heavy duty LT UG cable, 2 core 6 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire or tape and overall sheathed including cable gland, lug, jointing material etc, jointing, connecting , testing and commissioning all as specified and as directed. Note: Laying, testing and connection with suitable glands,lugs etc is deemed to be included in the quoted rates.

Supply and laying in trenches/ducts/ fixing on pole/structure with suitable size of GI clamps made out of GI strip 32 mm x 6 mm , 1100 Volts grade heavy duty LT UG cable, 4 core 10 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire or tape and overall sheathed including cable gland, lug, jointing material etc, jointing, connecting , testing and commissioning all as specified and as directed. Note:laying testing and connection with suitable glands,lugs etc is deemed to be included in the quoted rates.

S&F building security light with single piece, new generation energy saving and environmental friendly long life LED 35W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clams made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by three core 1.5 sqmm aluminium cable all as directed and as specified.

M/s. A P INFRA

AMAR CONSTRUCTION

Vinod Enterprises

M/s Automech Engineering

M/s. N D Karande

M/s. Shahabad Enterprises

M/s IBEX Engineers and Contractors