Renovation of Swimming Pool

Amount

Providing and laying swimming pool floor tiles in diffrent size (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to ISO: 13006/EN 14411, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with whiye cement and matching pigments etc complete

Providing and fixing swimming pool wall tiles conforming to ISO: 13006/EN 14411 (thickness to be specified by the manufacturer), of approved make, in all coloursm shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. "1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

polishing rubbing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

12 mm cement plaster 1:4 (1 cement : 4 coarse sand)

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade. Old work (one or more coats)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 75mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 20 mm diameter

Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm. at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super- Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument). 75mm thick in Grade M 25 with cement content not less than 330 kg per cum

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Supply ,installation ,testing and commissioning of bottom inlet Nozzle 32 mm made in white ABS screw type floor inlet with regulable flow and SS screws as per EN 13451-1 standard all complete as per directions of Engineer-in-Charge.

Supply, installation of overflow Grating made of ABS platic stablized polypropylene against UV rays of approved color,rectangular 293 mm wide joint together, 20mm thickness at corner on overflow channel (existing) conforming to EN 13451-1 and EN 13452-1 complete as per direction of engineer in charge.

Supply, Installation testing and commissioning support profile of overflow grating made of ABS plastic conforming to EN 13451-1 and EN 13452-1 suitable for 15 to 25 mm thick grating supplied in 2 metre length or better as required and as per directions of Engineer-in-Charge

providing and fixing stainless steel pool drain removable type grating with stainless steel frame and plate grade 304 ,18/18 size of following size fixed with S.S counter sunk screw.Complete as per the direction of engineer in charge.size: 600x600x6 mm thick

providing and fixing and jointing unplastisized PVC pipe 6 kg/sqm pressure pipe inciuding fitting with solvent etc. complete as per direction of engineer in charge.160 mm dia

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters

Extra for providing mechanical device chain and crank operating rolling shutters: Excedding 10.00 sqm and upto 18.80 sqm in the area.

Replacement of 300Watt halogen type lamp in under water swimming pool light of Astral make including removal of light fitting, gasket etc. and refixing the same along with supply installation, testing and commissioning of 300 w halogen lamp required gasket, sealing with water proofing compound all complete as per astral specification so as to make the fitting water proof. as per direction of Engineer-in-Charge

Supplying, Installation, testing & Commissioning of Transformer step down 650 VA on tapping 12V/14V/16V for suitable under water halogen type lights or as per direction of Engineer-in-Charge

Supplying, Installation, testing & Commissioning of electrical control cubical housing panel of size 800 X 600 X 300mm with Canopy for underwater Lights made with Power Coated CRCA sheet 14 gauge with suitable fixing arrangement on the wall surface or as per direction of Engineer-in-Charge

Devansh Enterprises

star Construction Company