SPECIAL REPAIR OF MI ROOM COMPLEX, TREATMENT ROOM, RECEPTION AND CORRIDOR BETWEEN SURGICAL OPD BLOCK INCLUDING THE PATHWAY LAB AND DENTAL SECTION (BLDG NO TWG 455 AND TWG 436) AT 305 FD HOSP UNDER GE TAWANG

Amount

B/R Portion : Dismantling plain or corrugated steel sheeting any thickness, any gauge, thickness, including nainital or similar roof covering.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

Taking down chowkets or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each.

Dismantaling timber scantling 40 Sq cm as in unframed work and over in sec in any position

S&F Second class hard wood plain, solid, straight chowkhats and frame, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F 40mm th 2nd class hard wood plain,framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

S&F 30mm th 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divieded into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secuering glass etc size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) all as specified and directed.

S&F 100 mm long butt hinges medium grade cold rollled mild steel and fixed

S&F 75 mm long butt hinges medium grade cold rollled mild steel and fixed

S&F Aluminium anodised barrel tower bolts 125 mm of extruded section and fixed

S&F 125 mm long aluminium handles cast type anodised

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

M&L 3 mm thick shet glass, ordinary quality and glazing with oil puty or wooden beads/PVC beads in square n exc 0.5 sqm in each pane

Dismantling of wall and celling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets. in any thickness incl cover fillets.

Dismantling boarding any description/ thickness fixed in any position with nails.

M&L Second class hard wood clean sawan boarding, 50 mm thick, with butt joints ln any situation fixed with nails.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber framework in wall only

M&L for 4 mm thick plywood, grade BWR, type BB, fixed with nails to timber framework in ceiling, flat or sloping

M&L for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails of sectional area exc 3 Sqcm and n.exc 6 Sqcm

M&L for applying two coat of synthetic enamel paint over a coat of pink primer on wood/plywood surfaces, over 10cm width or girth.

Demolition of concrete in ground floor and pavings nexc 15cm thickness including floor finishes like tiles if any of any description. (below or above ground level)

M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection./paving/footpath.

M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer.

M&L screed bed or bedding layer of mortar (1:4) 15 mm thick for laying floor finishers

M&L vitrified tiles light shade10mm thick (square /retangular) area of each tiles not exc 0.36 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or cloured cement to match

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks complete all as specified and directed.

M & L preparation of new surface & applying two coats of cement based paints over a coat of cement primer on wall.

Roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

Plain Cement Concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in surface channel and drain complete all as specified and as directed.

Materials and Labour for Extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete ,using extra cement incl forms, moulds etc complete all as specified and directed.

M&L for preparation of old painted surfaces and apply one coat of synthetic ennamel paint of steel surfaces of any description over 10 cm width or girth, not otherwise described.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

E/M : Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, ceiling roses, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down carefully by unscrewing from board/outlet boxes, fittings and fixture such as main switches & DBs of any size and any capacity complete all as specified and directed.

M/L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with PVC boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity all a specified and directed.

All as per item No 3 here-in- before but for one 5 Amp socket outlet independent board complete all as specified and directed.

All as per item No 3 here-in- before but for one 5 Amp socket outlet on the same board complete all as specified and directed.

All as per item Ser No 3 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sqmm and one run of 2.5 sqmm cable as earth continuity all as specified and directed.

Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts all as specified and directed

Supply and fixing for switch socket combination 2 in 1, 5 pin 5 Amps flush type 240 volts all as specified and directed.

Supply and fixing for switch socket combination multipurpose 15 Amp flush type, 5 in 1, 240 volts all as specified and directed.

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm all as specified and directed.

S&F LED Panel 2x2m 34 watts environmental friendly new generation aesthetically designed unltramodern, recess mounting luminaire with high brightness SMD LED as light source suitable for armstrong/grid ceiling, Cat Part No-PLUTONU2X2PLR34WLED840S, Make - Havells, C&S, Bajaj, Wipro or Equivallent.

S&F box type luminaries for 1 x 20 watts LED tube light fitting comprising of balast, lamp holder, connector block etc prewired complete with 28 watts LED tube rode fixed to wall/ceiling including provision of wooden round block of closed recessed 8cm dia and 2cm in depth (2Nos) for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fittig (connector block of lamp fitting) and one for earthing comolete including taking down old unserviceable one all as specified and directed. Make- Havells or equivalent in Bajaj/Crompton Greaves.

S&F battern LED light fittings, 10W luminiaries etc. Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50HZ complete all as specified and directed. Make Havells cat part No. ENDURALINEARNEOBS10WLED830SPCWH & Equivalent.

S&F Lamp Holder PVC/Polycarbonate type with Back plate suitable for batten fitting.

S&F LED Bulb of capacity 10 watt bulb lamp pin type suitable for fixing in pin holder. Make- Havells/CG/Bajaj.

S&F Air termination, single pointed copper rod 12mm dia and 300mm long, Complete all as specified and directed.

S&F Test terminal block made of gun metal or phosphourus beonze size 75x75x25mm, drilled and screwed including 3 Nos, 8mm dia 25 mm long hex. Head screw. Complete all as specified and directed.

S&F Galvanised iron strip 32x6mm buried in ground with saddles and fixing screws etc. Complete all as specified and directed.

Supply and fix sheet metal enclosures for DBs (Double door type) when MCBs to be used 240 volts12 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S&F only MCB SP, 240V, 6 to 40 Amps, 10 KA complete all as specified and directed.

S&F MCB SPN 240V 63 Amps, 10 KA complete all as specified and directed.

M&L in replacement of circuit/submain witing alongwith earth wire with the size of 2x10 Sqmm + 1x6 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in and including PVC casing caping complete fixing on wall, roof and floor all as specified and directed.

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009).

S&F sheet metal enclosures with socket plug top and MCBs double pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB specified and directed.

Supplying, laying, fixing & testing water Gyeser 25 Ltr with Adjustable knob for temperature setting, rust & shock proof ABS outer body, Vitreous enemal coated tank & compact & easy to install. Complete with all fittings & all accessories> Complete all as specified & directed. Make Havells BUENO25L White Blue/Ivory Brown & equivalent.

M/S ARGI ENTERPRISES

M/S GSW CONSTRUCTION

PARBIN SIDDIKI

M/S P D ENTERPRISES

M/S P N ASSOCIATES

M/S THONGDOK ASSOCIATES

M/S KESANG CONSTRUCTION