WELCOME MAINT AND REPAIR OF EXTERNAL AND INTERNAL PLASTERING GUNITING WORK AND CERTAIN INTERNAL EM WORKS AT AF STN ARJANGARH UNDER GE AF GURGAON

Amount

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and as directed.

M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished fair and even without using extra cement, complete all as specified and as directed.

M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls including finishing surface even and smooth without using extra cement , complete all as specified and as directed.

M&L for 5 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceiling including finishing surface even and smooth without using extra cement. complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.

M&L for Preparing of new surface of wall and applying two coats of exterior emulsion paint over a coat primer on walls complete all as specified and as directed.

M&L for Preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and as directed.

M&L for preparation of old treated plastered or unplastered surfaces of ceiling including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling cracks/holes with putty and applying one coat of distemper oil emulsion on ceiling complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces by complete removal of existing treatment by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper on walls complete all as specified and as directed. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes. (b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator.

All as per item No.10 here-in-before but on surfaces of ceiling complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc , laid bedded and pointed in any mortar etc, complete all as specified and as directed.

M & L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450X300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for 7 mm to 8 mm thick Joint less light ceramic tiles Ditto but in Dado/Skirting including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over screed bed or bedding layer 20 mm thick in CM 1:6, and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 13014 including backing coat 10mm thick in CM 1:4 complete all as specified and as directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab& pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edges complete all as specified and as directed.

Taking down chowkhats or frames of any type with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed.

Taking down, Chowkhats or frames of any type exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame),etc complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site complete all as specified and as directed.

M&L for Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed.

M&L for Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed.

S & F for flush shutters , solid core construction , with block board core and plywood face panels , commercial type on both sides , thickness 30 mm , etc complete all as specified and as directed.

S & F 30 mm, Ist class soft wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as specified and as directed.

S&F 100 mm size butt hinges, medium weight, cold rolled, mild steel complete all as specified and as directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F 125 mm size, aluminium anodized handles, cast type complete all as specified and as directed.

S&F 300 mm long MS sliding door bolt, plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S & F 300 mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and as directed.

S & F floor door stopper of aluminium alloy body 140 mm cover plate and tounge , anodized with hard drawn steel spring fixed in repairs complete all as specified and as directed.

Taking down, easing, adjusting of old wooden shutters of any description exc. 1 Sq,m and not exc. 2 Sq.m each and refixing in same opening after tiling work complete all as specified and as directed.

M&L for Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and as directed.

M&L for Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 177 of SSR part-II 2020 complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified in SSR part-II 2004 Section-8, clause 8B.1 to 8B.2.1 and shown on drawing in page No 176 of SSR part-II 2020 complete all as specified and as directed.

Taking down 20 mm dia GI steel tubing and connection, including cleaning for refixing or removal, complete all as specified and as directed.

S&F GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors 15mm bore complete all as specified and as directed.

S&F tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floos, complete all as specified and as directed.

S&F in repair stainless steel grating doom 125 mm dia size with waste hole complete all as specified and as directed.

M&L for Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and cement concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and as directed.

S&F One piece Vitreous China wash down water closet pan with integrated cistern, seat cover soft closing and twin flush system of size 680 x 370 x 750 mm white colour including necessary fixing acessories , IN REPAIR, complete all as appvoed as specified and as directed.

S&F Vitreous china wash down water closet pan, pedestal pattern (EWC) white, including seat cover , fixing bolts connection to trap & to flush pipe fixed in repairs complete all as directed by the Engineer-in-charge.

S&F in Repair Plastic water closet seat cover(Casgade model) closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, etc complete all as specifed and as directed.

S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and as directed.

S&F in repair vitreous china pedestal pattern wash hand basin (flat back) white of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, etc complete all as specifed and as directed.

S&F in repair Soap dish, Brass chromium plated, approximate size 160x 160x90mm complete all as specified and as directed.

S&F in repair Stainless steel sink made out of 1.00mm thick sheet for kitchen or laboratory with plug , waste pipe ,washers including cantilever cast iron brackets, connecting union etc overall size 495mm x 420 mm with bowl size 410mm x 330mm x 160 mm complete all as specified and as directed.

S&F in repairs concealed stop cock type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and as directed.

S&F in repairs stop cock/angle cock with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and as directed.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) Complete all as specified and as directed.

S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and as directed.

S&F Centre hole basin mixture with hot or cold mounted tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe, fixed as in repairs, complete all as specified and as directed.

S&F Bathroom mirror Cabinet (PTMT alloy) of size 622mm x 422mm with SS screws and fixed in position, IN REPAIR, complete all as specifid and as directed.

S&F Corner glass shelf, 5mm thick glass, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs, all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

S&F Chromium plated, stainless steel , jet spray including 1.5 mtr long flexible tube butterfly type including necessary connection for wash down water closet (pedestal pattern), fixed as in repairs, complete all as specified and as directed.

S&F in repair Sheet glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, bore of pipe in 75 mm, etc complete all as specified and as directed.

S & F for PVC (SWR) bends any radius, bore of pipe in 75 mm, etc complete all as specified and as directed.

S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.

S & F Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, complete all as specified and as directed.

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 60cmx75cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed.

Dismantling water tanks exc 500 & n exc 1000 and removing to store,etc complete all as specified and as directed.

S&F 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical verical with closed top triple layered) hoisted and fixed in position including tank neeplescomplete all as specified and as directed.

S & F for Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, Bore dia of pipe in 20 mm, etc complete all as specifed and as directed.

S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

S&F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in position complete all as specified and as directed.

M&L for Steel windows made of MS sheet 1.25 mm thick box type (primer coated) ERW hollow ‘P’ section of size 60 mm x 25 mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1 mm thick & openable leaf consisting two Nos sash bars of ‘T’ section 20 x 3 mm complete welded to frame including cutting holes & making good dismantled portion in PCC 1:2: 4 type B1 four Nos for each window complete all as specified and as directed including following fitting welded to shutter ;- (a) Hold fast 150 mm long 12 mm x 3 mm made to shape -04 Nos (b) Handle of ‘Z’ section 20 x 25 mm , 100 mm long 01 Nos each leaf. (c) MS tower bolt 150 mm long 02 Nos each leaf. (d) ‘Z’ section 20 x 25 mm , 100 mm stopper-01 Nos each leaf. (e) Cleat 55 mm long of hollow square 15 x 20 x 63 mm welded to hinges-01 Nos per leaf. (f) MS box type hinges of size 75 x 12 mm -02 Nos per leaf. (g) Fabrication & fixing complete.

All as per item No 80 above here-in-before but with out sash bars complete all as specified and as directed.

S & F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

S&F Sheet glass of ordinary quantity 3mm thick and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed.

M & L for 75 mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate), etc complete all as specified and as directed.

M&L for Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping including necessary formwork complete all as specified and as directed.

M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved , design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) complete all as specified and as directed.

S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed.

S&F for 4.8/5.0 mm thick sheet glass ordinary quality and glazing each pane n exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame work complete all as specified and as directed.

S & F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

Dismantling Asbestos cement sheets (corrugated ,semi corrugated etc) in roof coverings incl ridges etc complete all as specified and as directed.

M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for RCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate)as in chajjas / cooking shelves/ Tank staging platform etc. and the like including 5mm thick rendering in cm 1:3 finished even and smooth without using extra cement to the surface in contact with form surface complete all as specified and as directed. (The rate quoted by the contractor shall included forform work.)

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F in repairs steel rolling shutter 1.25 mm thickness of laths without ball bearing as specified incl top cover archoring rod, hasp & staple and shop coat of primer erected in position as indicated complete push pull or manual type including taking down of old shutter complete all as specified and as directed.

S&F sefty lever lock MS with 04 levers for rolling shutters complete all as specified and as directed.

M&L for greasing and servicing (overhauling) of steel rolling shutter of manual type of any size incl greasing and survives of ball bearing,hood cover anchoring rod hasp and staple complete all as specified and as directed.

Dismantling boarding of any description , fixed in any posititon with nails , complete all as specified and as directed.

S&F 18 mm thick 100 % solid WPC (Wood polymer composit) plain board( minimum density 650 kg/cum ) fixed with screws , solvent cement/adhesive to make kitchen cabinet sides , top & bottom shelves inside the cabinets complete all as specified and as directed. Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory to the manufacturing company

S&F 18 mm thick 100 % solid WPC (Wood polymer composit) plain board( minimum density 650 kg/cum ) of one side prelam/ rigidlam and the other side balancing laminate colour to make the kitchen cabinet shutter/ drawer front shutter . Complete all as specified and directed. Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory to the manufacturing company.

S&F 12 mm thick 100 % solid WPC (Wood polymer composit) plain board( minimum density 650 kg/cum ) fixed with screws , solvent cement/adhesive to make kitchen cabinet back and pull out drawer sides complete all as specified and as directed. Note:- Material testing certificate (MTC) and authentication of the product shall be mandatory to the manufacturing company.

S&F 20 mm wide and 1 mm thick PVC edge beading of PVC pasted on edges with suitable adhesive complete all as specified and as directed.

S&F of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and as directed.

S&F for stainless steel handles 100 mm size for kitchen cabinet / cupboard shutters complete all as specified and as directed.

S&F Sheet glass of ordinary quantity 3mm thick and glazing with oil putty in squares not exc 0.5 Sqm in each pane including hacking out the glass complete all as specified and as directed.

S & F in replacement of sub main wiring with PVC insulated, fire retardant (FRLS), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn into existing / new conduit of any size and type / casing-caping with and including one run of 2.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) New conduit/ casing- caping and accessories shall be measured separately. (ii) Two runs of 4.0 sqmm cable and one run of 2.5 sqmm cable of earth continuity conductor shall be a unit length.

S & F in replacement of sub main wiring with PVC insulated, fire retardant (FRLS), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 6.0 sqmm (Nominal area) drawn into existing / new conduit of any size and type / casing-caping with and including one run of 4.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) New conduit/ casing- caping and accessories shall be measured separately. (ii) Two runs of 6.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor shall be a unit length.

S&F in replacement enviroment friendly,ultra modern,energy saving surface mounted decorative 10 Watt LED bulkhead fitting with pressure die cast aluminium housing ,high efficient LEDs with opal diffuser and IP65 protection complete all as specified and as directed.

S&F in replacement of enviroment friendly indoor decorative 20 Watt LED polycarbonate Batten with opal diffuser including all accessaries complete all as specified and as directed.

S&F in replacement of enviroment friendly indoor decorative 10 Watt LED mirror light polycarbonate Batten with opal diffuser including all accessaries complete all as specified and as directed.

M&L in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 32 x 6 mm galvanised iron strip by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and as directed.

M&L in repair for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I strip 25x 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 40 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point complete all as specified and as directed.

M&L in repair for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I wire 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 15 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point complete all as specified and as directed.

Taking down electric energy meter of any size and type and deposite to MES store yard complete all as specified and as directed.

S&F in replacement microprocessor based three phase electronic tamper proof energy meter of rating 10 to 40 Amps, AC 415 Volts, 50 Hz covered with toughened glass cover with optical comunication port confirming to IS 13779 complete all as specified and as directed

S&F in replacement microprocessor based single phase electronic tamper proof energy meter of rating 10 to 60 Amps, AC 240 Volts, 50 Hz covered with toughened glass cover with optical comunication port confirming to IS 13779 complete all as specified and as directed

S&F in replacement microprocessor based single phase electronic tamper proof energy meter of rating 10 to 40 Amps, AC 240 Volts, 50 Hz covered with toughened glass cover with optical comunication port confirming to IS 13779 complete all as specified and as directed.

S & F Wall fan of single phase 230/240 V of size 400 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable complete all as specified and as directed.

S&F fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and as directed.

S&F in repair TPN DB's 8 way vertical type 415 V, double door suitable for housing of 125 Amps MCCB as main incoming complete all as specified and as directed.

All as per item No. 124 above but of 4 way and suitable for housing of 100 A/63 A MCCB as main incoming complete all as specified and as directed.

S & F MCCB 125 Amps capacity, 4 pole, 25 KA, fixed thermal and magnetic release complete with extended terminals to be fixed in 8 way TPN DB complete all as specified and as directed.

All as per item No. 126 above but capacity 63 Amps, fixed thermal and magnetic release, 4 Pole, 25 KA suitable to be fixed in 4 way TPN DB complete all as specified and as directed.

S&F in replacement double door TPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and as directed .

S & F in replacement with MCB TPN 32 amps 10 KA ,c-series including connection with suitable size aluminium / copper lugs complete all as specified and as directed.

S & F in replacement with MCB TPN 50 to 63 amps 10 KA ,c-series including connection with suitable size aluminium / copper lugs complete all as specified and as directed.

S & F in replacement with MCB TPN 100 amps 10 KA ,c-series including connection with suitable size aluminium / copper lugs complete all as specified and as directed.

S&F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 12 ways 240 V complete all as specified and as directed .

S&F in replacement of sheet metal enclosure double door suitable for SPN distribution boards when MCBs to be used having 200Amp rated bus bar 8 ways 240 V complete all as specified and as directed.

S&F in replacement of sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 4 ways 240 V complete all as specified and as directed.

S&F in replacement of single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 10-32 complete all as specified and as directed.

S&F in replacement MCB SP 5 to 32 Amps, 240 volts curve 'C',breaking capacity 10KA, complete all as specified and as directed.

S&F in replacement MCB SPN 5 to 40 Amps, 240 volts, curve 'C', breaking capacity 10 KA, complete all as specified and as directed.

S&F in replacement MCB SPN 50 to 63 Amps, 240 volts, curve 'C', breaking capacity 10 KA, complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and as directed.

M & L for replacement of concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and as directed for the followings :-

One light / fan point controlled by one way switch .

One 5 Amp socket outlet on independent board.

One 5 Amp socket outlet on same board.

One bell/buzzer point controlled by one bell push.

All as per above item No-140 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.

M&L for replacement of point wiring in casing caping/PVC conduit (not less 20 mm) on sufraces of wall/ceiling floor etc complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including PVC conduit , with mild steel terminal boxes (not less than 1.6 mm thick ) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and as directed for the followings :-

One light / fan point controlled by one way switch.

One 5 Amp socket outlet on independent board.

One 5 Amp socket outlet on same board.

One bell/buzzer point controlled by one bell push.

All as per above item no 142 here in befor but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.

M & L for replacement of point wiring in existing conduit (PVC/Steel) surface / concealed including existing MS Terminal boxes with 1.5 sqmm FRLS PVC insulated multi stranded copper conductor cable single core 1100 volts grade and one run of 1.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire and laminated sheet cover 3 mm thick on terminal box duly fixed including taking out old u/s wire of any type and size complete all as specified and as directed for the followings :-

One light / fan point controlled by one way switch.

One 5 Amp socket outlet on independent board.

One 5 Amp socket outlet on same board.

One bell/buzzer point controlled by one bell push.

Ditto all as per above item no 35 but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant ( FRLS ) cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.

S&F in replacement switch piano type 5 amp one way ISI Marked complete all as specified and as directed.

S&F in replacement switch piano type15 Amps one way ISI Marked complete all as specified and as directed.

S&F in replacement socket outlet 3 pin 5 Amps flush type complete all as specified and as directed.

S&F in replacement socket outlet 2-in-1, 3 pin 5 amp and 15 amps complete all as specified and as directed.

S&F in replacement socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed. Make : Havells Fabio 2.Carb tree, or its equivalent complete all as specified and as directed.

S&F in replacement socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed. Make : Havells Fabio 2.Carb tree, or its equivalent complete all as specified and as directed.

S&F in replacement switch 6 amps modular type one one way complete all as specified and as directed.

S&F in replacement switch 16 amps modular type one one way complete all as specified and as directed.

S&F in replacement electronic fan regulator Step type complete all as specified and as directed.

S&F in replacement bell push flush type 5 amp one way ISI Marked complete all as specified and as directed.

S&F in replacement modular type bell push 6 amp one module ISI Marked complete all as specified and as directed.

S&F in replacement Bell, DING DONG AC 230 Volts single pole type complete all as specified and as directed.

S & F in replacement of Lamp holder bakalite type with back plate suitable for batten fittings complete all as specified as directed.

S&F in replacement of ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S & F in replacement of modular Fan Regulator fan step regulator,120W-2 module ISI Marked complete all as specified and as directed.

S&F in replacement of modular blanking plate, 1 module ISI Marked complete all as specified and as directed.

S&F in replacement metal flush box 1/2 module complete all as specified and as directed.

S&F in replacement metal flush box 3 module complete all as specified and as directed.

S&F in replacement metal flush box 6 module complete all as specified and as directed.

S&F in replacement metal flush box 8 module complete all as specified and as directed.

S&F in replacement metal flush box 12 module complete all as specified and as directed.

S&F in replacement for white cover plate with frame, 1/2 module complete all as specified and as directed.

S&F in replacement for white cover plate with frame, 3 module complete all as specified and as directed.

S&F in replacement for white cover plate with frame, 6 module complete all as specified and as directed.

S&F in replacement for white cover plate with frame, 8 module complete all as specified and as directed.

S&F in replacement for white cover plate with frame, 12 module complete all as specified and as directed.

S&F in replacement of Hylem sheet 12"x15" complete all as specified and as directed.

S&F in replacement of Hylem sheet 8"x5" complete all as specified and as directed.

S&F in replacement of Hylem sheet 5"x5" complete all as specified and as directed.

S&F in repair LED post top 40/45 watts complete with suitable size of GI pipe suitable size of required length duly grouted in existing locations including , PVC copper wire 1.5 sq mm 3 core of required lenght (upto 3 mtrs) complete all as specified and directed. Cat No. LLD0001542 complete all as specified and as directed.

S&F in repair LED bollard fitting 10w complete with suitable size of nuts/bolts for fixing arrangement and provision of suitable size PCC foundation for fixing of bollard fitting etc complete all as specified and as directed.

S&F exhaust fans heavy duty 300 mm dia 1400 RPM, 50 Hz 230 volt for domestic use,dynamically balance blade , epoxy powder coated confirm to IS 2312-1967 with ISI marking IP-55 with class B insulation motor including suitable size louver and all fixing accessories such as fastners nut bolts and electric connection with 3 core cable complete all as specified and as directed.

S&F in replacement Exhaust fan 380 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply complete all as specified and as directed.

S&F in replacement Exhaust fan 450 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply complete all as specified and as directed.

S & F in replacement enviroment friendly recess/pendent mounting LED flat panel 36/40 Watts 2'x2' fabricated CRCA sheet steel housing cool white with high efficient LEDs & glare free opal diffuser PF>0.95 driver life >25000 Hours, operating range 140v to 280 V including all accessaries complete all as specified and as directed.

Taking down old metallic energy meter box of any size and type complete all as specified and as directed.

S&F in replacement of Energy meter Box Flame retardent polycarbonate body including all fixing arrangement like DIN rails mounting plate connection boxes fastning screw protection plate extra suitable to accomodate 3 Phase energy meter. the meter box shall be of SIze 450x300x214mm with locking arragement complete all as specified and as directed.

All as per Item No 182 Above But to accomodate single phase energy meter of Size 300x300x170mm complete all as specified and as directed.

S & F in replacement of Regid non-metallic PVC conduit 25 mm (external dia) ISI marked (on surface) incl of all accessories and all fittings such as Tees bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers lock nuts, saddles, pipe hook etc complete all as specified and as directed.

S&F ventilating exhaust fan single phase, plastic body 200 mm sweep, complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener complete all as specified and as directed.

S&F ventilating exhaust fan single phase, plastic body 250 mm sweep, complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener complete all as specified and as directed.

Supply , laying & testing in repair for XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 10 Sqmm nominal cross section x 4 core complete all as specified and as directed.

All as per item no. 187 but Size 10 Sqmm X 2 core.

All as per item no. 187 but Size 35 Sqmm X 3.5 core.

Excavation of soft/loose soil in trenches not exc 1.5 meter wide & not exc 1.5 mtr in depth: for foundationetc or for manholes, laying of pipe in any type of soil and getting out complete all as specified and as directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and as directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all as specified and as directed.

M & L for Old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and as directed.

M/s.sagar enterprises

Mohd Talha

akhil enterprises