Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹540.9 CrAdmitted-Finance CRYSTAL TOWER 4TH FLOOR TELIBANDHA RAIPUR | RAIPUR | RAIPUR | CHHATTISGARH | L1 | Admitted-Finance | ||
| 2 | L2₹580.4 Cr+₹39.6 Cr (7.32%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | L3₹582.1 Cr+₹41.2 Cr (7.62%)Admitted-Finance NCC HOUSE MADHAPUR HYDERABAD 500 081 | HYDERABAD | HYDERABAD | TELANGANA | 500081 | L3 | Admitted-Finance | ||
| 4 | Rejected-Technical JINDAL ITF CENTRE 28 SHIVAJI MARG MOTI NAGAR NEW DELHI 110015 INDIA | NEW DELHI | WEST DELHI | DELHI | 110015 | - | Rejected-Technical Non-responsive | ||
| 5 | Rejected-Technical B 31 32 2ND FLOOR INDUSTRIAL ESTATE NEW POWER HOUSE ROAD JODHPUR 342003 RAJASTHAN | JODHPUR | RAJASTHAN | 342003 | - | Rejected-Technical Non-responsive |
Tender Value
₹492.8 Cr
EMD Value
₹9.9 Cr
Closing Date
31 May 2024, 11:00 amClosed
Office of ACE,PHED, Region Kota
Office of ACE,PHED, Region Kota
Transmission Main, WTP, SCADA, Road Crossings, forest clearance, VVNL for Power line, land acquisitions, Intake pumping machinery, WTP pump house IPS and 10 years O and M including physical contingencies, price escalations of Baran distt Package-II
2024_PHCJA_387217_1
ACE NIT No. 27/2023-24
Open Tender
Civil Works - Water Works
Percentage
610 days
Jhalawar
As per TD
2 documents required · 2 mandatory
₹50,000
EE,PHED,Proj. Div. II Jhalawar
₹9.9 Cr
Yes
Office of CE(SP), PHED, Raj. Jaipur
25 Mar 2025
7 Mar 2024
31 May 2024
7 Mar 2024
31 May 2024
7 Mar 2024
19 Mar 2024
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Part-01: Pump House at Intake | - | - | - | - |
| - | Providing, installation, testing and commissioning of Submerged VT Pump sets with motor 4 pole sychronised speed of 1500 rpm ( water immersed, dry air filled, class "F" insulated TEWC motor integrally mounted on volute casing pump sets for drinking water ) 3 phase, +/- 3%, 415 volt +/- 10%, along with suitable foundation/ installation device and with 10 mtr cable, material of construction of impeller SS, casing (volute) CI, wearing ring SS, etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. | - | - | - | - |
| - | Each of capacity 301.37 LPS / 125 m head/555 KW | - | each | 69,37,500 | - |
| - | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. | - | - | - | - |
| - | MS pipe specials Above 600 mm dia (with minimum 6.3 mm thickness sheet). For Common Header, Suction, Delivery etc. | - | Kg | 129 | - |
| - | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date)/Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS:1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6 | - | - | - | - |
| - | 500 mm dia. With Gear | - | each | 3,57,543 | - |
| - | 1200 mm dia. With Gear | - | each | 47,33,407 | - |
| - | Providing, lowering, laying, aligning, fixing in position CI D/F short body pattern type butterfly valves having body, disc and end cover in graded cast iron generally conforming to (IS13095/1991amended upto date), synthetic rubber faced ring secured on disc by retaining ring with SS steel screw stub shaft of SS riding in teflon bearing including C.C. foundation/ structural steel support, material, labour, testing along with pipe line and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work | - | - | - | - |
| - | 500 mm dia | - | each | 2,70,252 | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.94 MB
TD27.pdf
Tender Documents • 16.32 MB
BOQ_690034.xls
BOQ • 1.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .