PROVISION OF INTEGRATED WATCH TOWERS AND PERIMETER ROAD INCLUDING IMPROVEMENTS TO THE EXSISTING PERIMETER WALL UNDER GE (AF) BAGDOGRA

Amount

SCHEDULE "A" Part - I (BUILDINGS/STRUCTURES WORK) Details of Buildings are given here-in-before:-

SCHEDULE "A" PART- II ( SITE CLEARENCE, SITE DEVELOPMENT AND EARTH WORK) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART- III ( INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV ( INTERNAL WATER SUPPLY ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART- V (ROAD/PATH) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART- VI (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART- VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART- VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART- IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART- X (IMPROVEMENT TO EXSISTING WALL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART- XI (VIEW CUTTER) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XII (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' F ' signifies this fact only.

INTERNAL ELECTRIFICATION S&Fswitch piano flush type, single pole, 6/16 Amp, Two way complete all as specified and directed.

S&F 9/10 W LED Bulb B22, 5700/6000K base complete all as specified and directed.

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected with GI earth wire of 4 mm dia. by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3 of SSR Part I (2009) , connected to earthing with DBs/panel/equipment all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 pit chamber, pre cast RCC 1:2:4 type B 1 cover slab 54cm x 54cm x 5cm reinforced with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar, 20mm dia GI medium grade pipe for watering , and water funnel with wire mesh, 20mm dia light grade GI pipe for protection of strip complete all as specified and testing on completion complete all as specified and directed.

INTERNAL WATER SUPPLY S&F brass angle stop cock CP high pressure with capstan head long shank screwed down 15mm dia. bore complete all as specified and directed.

SEWAGE DISPOSAL Construction of LLDPE Septick tank 5500 ltr modular type septic tank, designed to carry out sewage and sludge water, excavation in any type of soil, return filling, removing of surplus soil, PCC 1:4:8 in foundation, vent pipe, backfiling , covering top surface etc all as per manufacturers' instruction and complete all as specified.

M&L for Soakage wells of effective depth 3.2mx2.25m, excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed.

EXTERNAL WATER SUPPLY M&L for Construction of brick masonry valve pit of size 90x 90 x 90 cm (Internal dimension) of sub class 'B' bricks buit in cement mortar (1:4) on 200mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation including PCC 1:3:6 type C1 using 20 mm graded crushed stone aggrgate as in bedding and copping, 15 cm thick cement plastering in CM (1:4) internally and externally upto 15 cm below ground level and providing valve pit cover with 3 mm thick MS sheet welded with 40x40x6mm angle iron frame on top surface of pit wall on edge of the cover and hinged in one side and providing locking arrangement including complete painting including corners with two coats of synthetic enamel paint over one coat red oxide prime complete all as specified and directed. Note : - Rate of excavation, return filling and removing of any type of soil shall be inclding in this item.

M&L for boring of holes under road, pavement, hard starding upto 2 m deep in soil and suitable for upto 200mm dia of pipe with manual horizontal boring for insertion of Gl pipe upto 40mm dia. complete all as specified and directed.

EXTERNAL ELECTRIFICATION M&L for boring of holes under road, pavement, hard starding upto 2 m deep in soil and suitable for upto 200mm dia of pipe with manual horizontal boring for insertion of Gl pipe upto 40mm dia.(light grade) complete all as specified and directed. Note :- The rate of 40mm dia. light grade GI pipe shall be including in this item.

Supply and fixing of LED Flood light/ Search light with LED/ COB LED as a light source. The fitting shall be suitable for outdoor installation with IP 65 degree of protection and NABL tested as per relevent IS. The search light shall be mounted on 360 degree swivel type machanism on rotating table with 45 degree tilting arrangement complete with standing base, locking arrangements, rotating handle, complete all as specified and directed.

IMPROVEMENT TO EXSISTING WALL Dismantling of Barbed wire any type complete all as specified and directed.

M&L for preparation of newly plastered surface of wall including pilaster and cornices and applying two coats of exterior emulsion (weather coat) paint over a coat of anti alkaline primer in different shades for camouflage and concealment of sigma II software design / patterns approved by GE/User complete all as specified and directed.

S&F in repairs 600mm dia. concertina coil made from high tensile spring core wire confirming IS 4454 duly hot dipped galvanised with dia. 2.60mm, spiral turn per coil is 50 Nos zinc coating 250-300 gm/Sqm and strip is electro galvanised strip 0.50mm thick, width 19mm, zinc coating 120gm/Sqm and pitch of barbs 25mm complete all as specified and directed. Note:- (i) Coverage per coil =6 to 6.50 RM (ii) Weight of each coil = 8.50 Kg (iii) No of circle per coil = 50

VIEW CUTTER S&F Mild Steel Perforated Sheet 2mm thick with round hole and 33% open area fixed with suitable screw or welding to the frame complete all as specified and directed.

Note:- Schedule of credit (Sch 'A' Part- XIII) amount of Rs 1,06,548.00 shall be deducted from the total quoted amount of BOQ.

NEO BUILDERS

M/S R. K. INDUSTRIES