ADDITION ALTERATION TO CERTAIN NCs E AND CIVILIAN QUARTERS AT CHAKERI KANPUR UNDER GE AF BR CHAKERI

Amount

B/R WORKS

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) complete all as specified and directed. .

Demolition of brick work built in cement mortar complete all as specified and as directed .

Material & Labour for brick work with sub-class ‘B’ bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material & Labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 with complete all as specified and as directed.

Material & Labour for 25 mm thick PCC Type B-0 1:2:4 (12.5 mm graded agg) as in leveling /sub base of flooring complete all as specified and directed.

Material & Labour for joint free non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 sqm in floor etc of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tile, over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

Material & Labour for joint free vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 sqm in floor etc of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tile, over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.

Material & Labour for joint free vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 sqm in skirting of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tile, over and including backing coat 10mm thick in cement mortar 1:4 complete all as specified and directed.

Material & Labour for joint free glazed ceramic tiles in vertical surfaces 450 x 300 x 7mm thick of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces over and including backing 10mm thick in CM 1:4 complete all as specified and directed.

Material and Labour for 18 to 20 mm thick black granite (of any type) work (table rubbed and polished) in steps,jambs,pillars,window cills,cooking platform and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding & dismantling complete all as specified and as directed

Material and Labour for machine cut kota stone as in shelving, steps, tread, riser 20-25mm thick in single piece finished in CM (1:6) including necessary bull nosing fixed to wall,step and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding, rubbing and polishing complete all as specified and as directed.

Taking down cement plaster on wall including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed

Material and Labour for 15mm thick rendering on fair faces/other than fair faces of brick wall in CM 1:6 finished even & fair complete all as specified and directed

Material and Labour for 15mm thick rendering on fair faces/other than fair faces of brick wall in CM 1:4 finished even & fair complete with using WPC as per manufacturer instruction all as specified and directed. Note:- WPC shall be measured and paid separately.

Material and Labour for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer over and including 1mm thick birla wall care putty complete all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of primer over and including 1mm thick birla wall care putty complete all as specified and directed.

Material and Labour for applying two coats of cement base paint over a coat of primer including preparation of newly plastered untreated surface of wall complete all as specified and directed.

Material and Labour for preparation of old plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of primer over and including 1mm thick birla wall care putty complete all as specified and directed.

Material and Labour for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of oil emulsion distemper over a coat of primer over and including 1 mm thick wall care putty complete all as specified and directed.

Material and Labour for Applying two coats of cement base paint over a coat of primer including preparation of old plastered untreated surface of wall complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing 40mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

Material and Labour for GI tubing of medium grade 15 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

Material and Labour for GI tubing of medium grade 20 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

Material and Labour for GI tubing of medium grade 40 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

Re-fixing of 15 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors complete all as specified and directed.

Re-fixing of 20 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors complete all as specified and directed.

Supply & Fix in repair 15mm bore bib tap, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply & Fix in repairs 15 mm stop angle vavle cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply & Fix 15mm bore bib tap, fancy type two way chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply & Fix 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

Supply & Fix 15 mm bore, brass CP L-Bend wall mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

Supply & Fix in repair 15mm bore PVC connection 600mm long heavy duty with brass fly nut and warsher for hot and cold water complete all as specified and directed

Supply & Fix in repair brass chromium plated shower rose 125mm complete all as specified and directed.

Supply & Fix Soap dish chromium plated complete all as specified and directed.

Supply & Fix Corner shelf with frame triple, chromium plated complete all as specified and directed.

Supply & Fix Toilet paper holder, chromium plated complete all as specified and directed.

Supply & Fix Towel Ring, chromium plated complete all as specified and directed.

Supply & Fix 32 mm bore waste coupling chromium plated half or full threaded complete and all as specified and directed

Supply & Fix in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed.

Supply & Fix hand shower (health faucet) with 8mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed.

Supply & Fix in repair 10 ltrs capacity low level PVC flushing cistern, valveless, symphonic type, white with inlet, ball float valve and handle including brackets complete and all as specified and directed.

Supply & Fix in repair vitreous chinaware EWC padestal type closet with white seat including cover with flat bottom with hinging device and PVC (SWR) 110 mm bore trap complete all as specified and directed.

Supply & Fix in repairs vitreous china white squatting pan orrissa pattern size 630x450mm with integral foot rest including provision of lime concrete bedding fixed complete all as specified and directed.

Supply & Fix in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets complete all as specified and directed.

Supply & Fix in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers & wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets & connected to pipe , size overall 915 x 460 mm & bowl size 410 x 330x160 mm complete and all as specified and directed.

Supply & Fix in repair stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/ clamps with screws, pattern & design as approved by GE complete all as specified and directed.

Supply & Fix rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/ vertical with closed top), white colour, triple layer construction, ISI marked, hoisted & fixed in position, including 20mm dia ball valve including dismantling of old tank & removing to where directed complete all as specified and as directed.

Supply & Fix in repair 20mm dia gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply & Fix in repair 25 mm dia (1mm wall thickness) stainless steel 202 Gde drapery rod with including brackets, decorative SS finials/ knobs at both ends complete all as specified and directed. (Note : Sample/ design as approved by GE)

Taking down CI/ PVC/ AC pipe 100/75 mm fixed to wall or floor etc including accessories complete all as specified and directed.

Supply & Fix PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Supply & Fix PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Taking down eaves gutters and rain water pipes(any size or pattern), including all fittings, head, shoes, bends, swan-necks etc. including cleaning for refixing (measured overall as fixed along the centre line over fittings) and Supply & Fix PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints on wall with and including PVC clamp complete all as specified and directed. accessories complete all as specified and directed.

Supply & Fix in repairs 75 mm dia PVC (SWR) Floor trap, plain with grating incl jointing with solvent cement including PCC & Form work as required complete all as specified and directed.

Supply & Fix 75 mm dia PVC (SWR) junction single, (Single T) equal, or unequal with oval accesse door including jointing with solvent cement as required complete all as specified and directed.

Supply & Fix PVC bend/ shoe of dia. 75mm (with oval access door) complete all as specified complete all as specified and directed.

Supply & Fix 110 mm dia PVC (SWR) junction single, (Single T) equal, or unequal with oval accesse door including jointing with solvent cement as required complete all as specified and directed.

Supply & Fix 110 mm dia PVC (SWR) branch piece, single equal, or unequal of any length door including jointing with solvent cement as required complete all as specified and directed.

Supply & Fix 110 mm dia PVC (SWR) reducer, single equal, or unequal of any length door including jointing with solvent cement as required complete all as specified and directed.

Supply & Fix PVC bend/ shoe of dia. 110mm (with oval access door) complete all as specified and directed.

Supply & Fix PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

Material & Labour for dismantling of loose/ disintegrated portion of RCC chajjas, parapet, ceiling, end shelves beams balconies and similar work at any position or any height and dubbing out with pcc 1:1.5:3, 15 mm to 50 mm thick using 6 to12 mm graded stone aggregate to make up and finished required shape including applying anti-corrosive paint on exposed surfaces of steel reinforcement and provision of necessory supporting formwork and including 10 mm thick plastering in CM 1:4 finished fair and even on concrete/ brick masonry surfaces finished even and smooth complete all as specified and directed.

Dismantiling of concrete by chiselling from RCC members like column, beam parapet, facia, ceiling, chajja etc exposing the reinforcement without disturbing the reinforcement and get free from rust by sand blasting providing at places addl reinforcement welding with existing reiforcement as directed wherever required binding with welded mesh 100 mm x 100mm (12 gauge welded mesh) & tack welding and primed with using Araldite epoxy resins & provision of guniting pressure 2 to 3 Kg/Sqm with admixer 1 cement 3 sand mixed with Dr fixit Pidicrete SC plasticiser (2 to 10% by weight of cement ) of thickness 40mm average including stripping, flaoting with wooden strippers for proper dimension control including necessary formwork & scaffolding upto Two storey complete and surface of guniting to be finished fair and even with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @ 3% by weight of cement cleaning & removing of waste material etc as directed at site including necessary painting, white wash, distemper/ exterior acrylic emulsion). All surrounding wall, joineries and fittingshould be covered with polythene sheet by contractor while work. (Any wall, floor,fittings and roof damaged by the contractor shall be repaired/ changed by contractor under same item and no extra payment will be paid to contractor for the same complete all as specified and directed. Note: Welded mesh & additional reinforcement if required shall be measured and paid separetely.

Material & Labour for Mild steel TMT 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.9mm dia annealed) complete all as specified and directed.

Supply & Fix Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm each but n.exc 4sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply & fix steel window factory made, made out of MS hollow section of 79mm x 39mm x 1.6mm thick frame with double shutters (glazed & wire gauge shutters) made out of ‘box type’ section using flush butt weilding & tenon reveting all as per is 1038/83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, ‘box type’ section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making food in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.

Supply & Fix factory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete as as per specified and directed.

Supply & Fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed. Note: 1. For WPC solid or window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made on this account.

Supply & Fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: 1. For WPC solid or window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeon this account.

Supply & Fix 30 mm thick plain WPC factory made wire mesh solid door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company.The door to be pannened with SS mosquito mesh and XTN alluminium mesh for additional strength and safety purpose. Door shall be fixed with SS hinges and SS screw and should be water proof, termite proof, fire retardant and having screw holding capacity complete all as manufacturer's specification & drawings complete all as specified and directed.

Supply & fix Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. Note: stainless steel butt hinges shall be measured and paid separately

Supply & Fix 3mm thick Sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.

Supply & Fix 3mm thick figured glass pin headed type and glazing with oil putty in squares n. exc 0.5sqm in each pane complete all as specified and directed.

Supply & Fix stainless steel wire cloth 0.36 mm nominal dia of wire and 1.40 mm average width of aperature fixed with tinned tacks or galvanished wire staple complete all as specified and directed.

Supply & Fix Butt Hinges medium weight stainless steel 100mm long complete all as specified and directed.

Supply & Fix Aluminum anodized sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply & Fix aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 200 mm long complete all as specified and directed.

Supply & Fix aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

Supply & Fix 150 mm long door stopper of alumunium alloy body door stopper fixing on door, complete all as specified and directed.

Supply & Fix PVC door strip fixed at bottom for doors with complete fitting complete all as specified and directed.

Material & Labour for Painting to steel and iron surface of any description nexc. 10cm in width or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface complete all as specified and directed.

Supply & Fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed

Material & Labour for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick Moulded prelam PVC sheet on the front face & 2mm plain colour PVC prelam sheet on back face and fixed in the frame at site as per specification & drawing complete all as specified and directed.

Supply & Fix SS but hinges, medium weight cold rolled of size 100 mm thick complete all as specified and directed.

Supply & Fix aluminium anodised sliding bolt 250 mm long with hasp, staple (bolt type) and fixing of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.

Supply & Fix aluminium alloy anodised handle of size 100 mm fabricated type complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

Material & Labour for 18mm thick prelaminated WPC board one side plain , other side decorative colour of any choice for cupboard, kitchen cabinet and connected work complete all as specified and directed.

Supply & Fix Ball and catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply & Fix continuous piano hinges brass bright finish or electro galvanished width of flabs when open in 30 mm complete all as specified and directed.

Supply & Fix stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and directed.

Supply & Fix 40mm dia, cupboard knobs fixed with nut, screw and washer of of brass, polished complete all as specified and directed.

Supply & Fix 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed

Taking down/ removing of existing water proofing treatment on roof surfaces and wall surfaces complete including screed bed, mud phuska, PCC, PCC tiles etc racking out joints, hacking for key scrubbing down with water etc,upto 0.50m depth and removing rubbish out side of MD land complete all as specified and directed.

Material & Labour for PCC type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) thickness as required at site for benching,coping,padding concrete as on roof, mixed with water proofing compound as per manufacturer instruction etc complete all as specified and directed.

Material & Labour for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path/ plinth protection finished the surfaces even & fair complete all as specified and directed

Material & Labour for cement concrete 1:5:10, type E2 using 40mm graded stone aggregate as in filling mass concrete complete all as specified and directed.

Material & Labour for two coats of master seal 550 to prevent leakage/ seepage through sunken floor over prepared surfaces complete all as specified and directed.

Material & Labour for screed bed 15 mm thick (average) plaster on concrete surfaces in CM 1:4 on roof, sunken floor mixed with water proofing compound as per manufacturer instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

Material & Labour for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface complete all as specified and directed.

Material and labour for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment complete all as specified as under :- (a) Prepare surface by removing all laitance, foreign matter, dirt, oil, grease and loose particles. (b) All existing cracks and expansion joints. if any, shall be treated with PU range of polyurethane sealant. (c) Provide 75mmx75mm coving at H-V junctions if any using acrylic polymer modified mortar as bond coat. (d)Apply two coats of PU polyurethane based clear primer @ 8 to 10 sqm/ltr per coat on well prepared substrate covering entire area uniformly. (e) Apply polyurethane based high tensile strength elastomeric waterproofing liquid membrane coating in two coats by roller/airless spray @ 0.75Kg/sqm per coat. second coat is applied perpendicular to first dried coat (first coat is allowed to dry for 12 to 24 hours before proceeding for second coat)

Supply only liquid water proofing compound complete all as specified and directed. Note: Ratio of WPC with cement shall be as per manufacturers instructions.

Supply & Fix 20 mm thick hydraulically pressed cement tiles laid over and including 15 mm thick screed bed in CM (1:6) including mixed with water proofing compound (@ 3 % by weight of cement) and jointed and pointed with CM (1:3) mixed with 5% crude oil by weight of cement over APP Membrane complete all as specified and directed.

Demolition of reinforcement cement concrete of any description i.e. RCC tank, beams, column and in position not otherwise specialy provided old u/s water tank complete all as specified and directed.

Excavation of loose/soft soil in trenches n. exc 1.5 m wide & n.exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm grade stone aggregate as in surface channels and drains complete all as specified and directed.

Removing of excavated material not exc 50 mtr distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Material & Labour for Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, (tree grown on roof, terrace, beam, walls etc) filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site cutting tree with branches of girth , roots etc with removing of roots from roof, wall, beams & making good with PCC 1:2:4 and plaster 1:4 complete all as specified and directed.

Supply & fix MS helical door spring 250 mm size including roller and roller plate complete all as specified and directed.

Material & labour for reinforced coment concrete type B-1, 1:2:4 (using 20 mm graded stone aggregated) in beams cantilevers, platform, shelve, lintels. etc including necessary form work complete all as specified and directed.

E/M ITEMS Taking down carefully (copper/aluminum) unserviceable point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces with distemper/ white washing/ colour washing as per existing complete all as specified and directed.

Taking down carefully by unscrewing from main switch boards/ cut out boxes/ MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc. complete all as specified and directed.

Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings,bulk head fittings, tube light fittings , street light , flood LED lights etc complete all as specified and directed.

Material & Labour for Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of modular switches/ sockets/ regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed. Note:Rate of point wiring shall include cutting chases for conduit/ flush boxes etc

Material & Labour for Point wiring for One 3 pin socket outlet 5Amps on the same board with other switches with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of modular switches/ sockets/ regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed. Note:Rate of point wiring shall include cutting chases for conduit/ flush boxes etc

Material & Labour for Point wiring for One 3 pin 5 Amp socket out let controlled by one switch on independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of modular switches/ sockets/ regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed. Note:Rate of point wiring shall include cutting chases for conduit/ flush boxes etc

Material & Labour for Point wiring for One bell /Buzzer point controlled by one bell push 5 amp on the same board with other switches or independent with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of modular switches/ sockets/ regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed. Note:Rate of point wiring shall include cutting chases for conduit/ flush boxes etc

Material & Labour for Point wiring for one light point controlled by two 2- way switches on Independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of modular switches/ sockets/ regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed. Note:Rate of point wiring shall include cutting chases for conduit/ flush boxes etc

Material & Labour for Point wiring for power point 15 amp socket outlets point controlled by one switch on Independent socket outlet using 2.5sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular/conventional type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of modular switches/sockets/regulator etcincluding PVC insulated and unsheathed FRLSH 2.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed. Note:Rate of point wiring shall include cutting chases for conduit/flush boxes etc

Material & Labour for Ceiling rose, 2 to 3 terminal PVC/ polycarbonate , isolated body type suitable for AC 230 volts complete all as specified and directed.

Material & Labour for 1 module cover plate with frame as per site requirement complete all as specified and as directed.

Material & Labour for 2 module cover plate with frame as per site requirement complete all as specified and as directed.

Material & Labour for 3 module cover plate with frame as per site requirement complete all as specified and as directed.

Material & Labour for 4 module cover plate with frame as per site requirement complete all as specified and as directed.

Material & Labour for 6 module cover plate with frame as per site requirement complete all as specified and as directed.

Material & Labour for 1/2 Modular metal Flush box as per site requirement complete all as specified and as directed.

Material & Labour for 3 Modular metal Flush box as per site requirement complete all as specified and as directed.

Material & Labour for 4 Modular metal Flush box as per site requirement complete all as specified and as directed.

Material & Labour for 6 Modular metal Flush box as per site requirement complete all as specified and as directed.

Supply and fixing switch modular type, 1 module, 6 / 10 Amps, 230 volts one way complete all as specified and directed.

Supply and fixing switch modular type, 1 module, type 16/20 Amps 230 volts one way complete all as specified and directed.

Supply and fixing socket outlet modular type, 2 module, 2/3 pin combined, 6 Amps complete all as specified and directed.

Supply and fixing socket modular type, 2 module, type 16/20 Amps 230 volts one way complete all as specified and directed.

Supply and fixing switch modular type, 1 module, 6/10 Amps, 230 volts two way complete all as specified and directed.

Material & Labour for Modular Bell push 6A 1 way, 1 Module ,complete all as specified and as directed.

Supply and fix Bell AC 230 Volts,single pole as directed including connecting complete all as specified and directed.

Supply and fix Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting complete all as specified and directed.

Supply and fix energy efficient LED lamp 5 watt capacity complete all as specified and directed

Supply & Fix energy efficient 20 watt (4.0 feet)LED integrated batten type luminaires suitable for wall or ceiling mounting with built in LED Chip & integral LED driver 20 watt, Aluminium channel housing & Polycarbonate diffuser of length 1200 mm (approx.), Color temperature 6500 K or as directed, CRI between 80-85,Low THD,PF-0.90 (mimium), efficacy not less than 100 lumen/watt or total lumen output not less than 2000 lumen per 20 watt, operating range 200-270V , surge protection of 2 kV, over voltage protection and other safety tests as per IS 15885 Part-2/ Part-3, estimated life span of 25,000 hrs with all accessories, complete with fixing arrangement, fitting shall be internally prewired and conforming to LM 79 & LM 80 standard, making all connection using 1.5 sqmm copper conductor multistrand PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting complete all as specified and directed. Note:(i) LED fitting shall be provided for 3 years warranty.

Supply and fixing LED Bulk Head type with high out put , 10 watt ,220 V AC,Color temperature 6500 K or as directed, efficacy not less than 100 lumen/watt or total lumen output not less than 1000 lumen/10 watt, estimated life span of 50,000 hrs with all accessories, complete with fixing arrangement, fitting shall be internally prewired and conforming to LM 79 & LM 80 standard ,IP 65 protection dust and water resistant ,surge protection up to 2.5kV, PC opal high efficiency diffuser , die cast aluminium housing with complete assembly, suitable for surface/wall mounted with driver holder including connecting up using 1.5 sqmm copper conductor multistarnd PVC insulated with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and Fix distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with appropriate Amps rated copper busbar, neutral bar,internal earth bar and cable ties for cable management,reversible door for IP 43 & IP 54, IK 09 impact resistance, single pole and neutral 250 Volts, flush to wall including chases cutting in wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed. DB shall be designed with provision for MCB SPN as incomer & MCB SP as outgoing as per requirement. Cost of the DBs shall be without MCBs complete all as specified and as directed Note - Rates are inclusive for flush(Concealed ) mounting of DB SPN .

Supply and fixing 240V,10 KA 'C' curve miniature circuit breaker (MCB) single pole of current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing 240V,10 KA 'C' curve miniature circuit breaker (MCB) single pole and neutral current carrying capacity 32 Amps, in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fix Vertical TPN distribution board (DB), double door type, as per as per IS 8623- 1 & 3 / IEC 61439- 1 & 3. made out of sheet metal enclosure (CRCA sheet) dust and vermin proof , TPN 4 way with inbuilt MCCB 125 amp 4 pole as incomer, suitable Amps rated copper busbar, 415 Volts suitable for TPN MCB/ 4 pole Isolator, 2 neutral bar and 2 earth bar and blanking plates, IP 54 protection, IK 09 impact resistance, with detachable gland plate, terminal connectors and other required hardware & fasteners cable ties for cable management (Fully insulated busbar and shrouded neutral bars), reversible door for IP 43 & IP 54 , flush mounted to wall complete. DB shall be designed with provision for MCCB as incomer & SP / SPN MCB as outgoing as per requirement. Cost of the DBs shall be without MCB/ MCCB complete all as specified and as directed. Note : Rates are inclusive for flush(Concealed ) mounting of Vertical DB TPN .

Material & Labour for Sub main wiring using PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and external dia as under but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories complete all as specified and as directed including taking down old unsv submain cable for the following sizes as under . Using two single core PVC insulated FRLS cable 4.0 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire Note : 1. 2 runs of 4sqmm copper cable & 1 run of 4.0sqmm copper cable in and including PVC conduit 25mm shall be measured as one unit 2. Rate of sub main wiring shall include taking down old and cutting chases for conduit/flush boxes etc

Supply and fixing 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod/down rod as per height available at site , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.0, Air delivery minimum 210 CMM,350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC Supply etc , complete with fixing arrangement anchor the fastener hook including connection with 1.5 sqmm mutistrand copper conductor flexible wire from ceiling rose to fan drawn through PVC flexible conduit complete including taking down old fan and deposited to MES store yard complete all as specified and directed.

Supply and Fix Exhaust Fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1500 minimum, Copper winding of 300mm sweep with guard, opaque finish Aerodynamically designed & balanced Blades, 860 m3/ h air delivery, Noise level less than 44db complete with outside louvers, making suitable size hole in the existing surface/stone masonry wall round sling sleeve made up of RCC hume pipe of 300mm dia flush inside the wall to achieve preface duly painted to match with existing, including provision of aluminium frame of suitable size all along the exhaust fan to fix it properly on wall writing of MES number with necessary fixing arrangement and making good to disturbed surface complete including connection with 1.5 sqmm multistrand copper conductor flexible wire from ceiling rose to fan drawn through PVC flexible conduit complete all as specified and directed.

Material & Labour for Earthing complete with GI earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to GI wire 4mm dia as earth lead up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates, 40mm thick precast RCC cover in 1:2:4 reinforced with expanded metal(weight not less than 4 kg/sqm), and frame of angle iron 25x25x6mm with lugs 02 nos with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including light grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI earth wire protection pipe 15mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed.

Supply & Fix LED building security Light fitting 35 watt for operating voltage between 140V to 270V system luminious efficacy not less than 100 lumen Iumen/ watt , PF-0.95 minimum, IP65/66 & IK 08 class of protection, 5700CCT(K), CRI between 80-85 confirming to LM79 and LM 80 standards or as per IS-16104:2012 and IS-16106:2012 for estimated life span of minimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits SMPS based constant current supply with phase to phase protection, over voltage protection, surge protection and other safety tests as per IS 15885 Part-2/ Sec13, Low THD, PMMA grade high quality Transmittance lens, LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment, Heat resistance toughened UV stabilized glass fitted in pressure die cast aluminium housing with SS screws with IP 65/66 protection complete all as specified and as directed. Note: (i) LED fitting shall be provided with 3 years warranty.

Supply and fixing bracket made out of GI light grade pipe of size 40mm dia 1.5m long bend to an angle of 120 degrre with 02 Nos MS clamp 50mm x 50mm and 04 sets of nuts, bolts and washers, painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified and directed.

Material & Labour for GI wire 4mm dia and fixing with proper clamp, saddles, nuts bolts, washers etc. properly and connected to pole complete all as specified and directed.

Supply & Fix GI Pipe light grade 15mm bore for protection of GI earth lead complete with all fittings complete all as specified and as directed

POOJA ENTERPRISES (BID ID -3391360)

M/s DELTA ERECTORS PVT LTD (BID ID -3398501)

M/s DKS Engineering Works (BID ID -3391118)

Deepesh Electricals (BID ID -3398975)

jayanti associates (BID ID -3390520)

Shri Siddhi Vinayak Builders (BID ID -3390537)

M/s R.V. Constructions (BID ID -3392408)

Ashirwad Contractor and Supplier (BID ID -3390680)

MITHILA BUILDERS AND ENGINEERS (BID ID -3389483)

A K BANDHUS (BID ID -3399452)