REPAIRS TO PLUMBING, SANITARY FITTINGS AND CONNECTED WORKS AT TAMULPUR AND DARRANGA MILITARY STATION UNDER GE RANGIA

Amount

Taking out old existing galvanised iron water mains 15 mm bore (including all fittings) with spigot and socket ends including cleaning for refixing or removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge.

Taking out old existing galvanised iron water mains 20 mm bore (including all fittings) with spigot and socket ends including cleaning for refixing or removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge.

Taking out old existing galvanised iron water mains 25 or 32 mm bore (including all fittings) with spigot and socket ends including cleaning for refixing or removing unserviceable pipes and fittings from site complete all as per specified and as directed by Engineer-in-charge.

S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.

S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.

S&F GI tube 25 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.

Re-fixing old 15 mm bore steel water tubing and connection in new or old position including fittings, threading, cleaning for refixing to walls, ceiling or laid in floors complete all as per specified and as directed by Engineer-in-charge.

Re-fixing old 20 mm bore steel water tubing and connection in new or old position including fittings, threading, cleaning for refixing to walls, ceiling or laid in floors complete all as per specified and as directed by Engineer-in-charge.

Re-fixing old 25 or 32 mm bore steel water tubing and connection in new or old position including fittings, threading, cleaning for refixing to walls, ceiling or laid in floors complete all as per specified and as directed by Engineer-in-charge.

Disconnecting existing tanks exc 250 Ltrs and n.exc 500 Ltrs, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-charge.

Disconnecting existing tanks exc 500 Ltrs and n.exc 1000 Ltrs, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks of capacity exc. 250 and not exc. 500 ltrs, complete all as per specified and as directed by Engineer-in-charge.

Dismentaling water tanks of capacity exc. 500 and not exc. 1000 ltrs, complete all as per specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks ISI Marked two layered (cylindrical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed complete all as per specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks ISI Marked two layered (cylindrical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed complete all as per specified and as directed by Engineer-in-charge.

S&F in repair gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe of 20 mm bore including dismantling unserviceable one complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 20mm dia. ball valve PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and of 20 mm bore complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 25mm dia. ball valve PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and of 25 mm bore complete all as per specified and as directed by Engineer-in-charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening complete all as per specified and as directed by Engineer-in-charge.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including taking down old unserviceable PVC door frame with shutter complete all as per specified and as directed by Engineer-in-charge.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.

S&F 100 mm long stainless steel butt hinges medium weight cold rolled, complete all as per specified and as directed by Engineer-in-charge.

S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engineer-in-charge.

Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.

M&L for brick work with sub-class `B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specificied provided for, complete all as per specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars 6 to 8 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.

M&L for pre-cast reinforced cement concrete (1:1.5:3) type A-1 with using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps, septic tanks etc with plain faces set in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and as directed by Engineer-in-charge.

S&F coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 15 mm thick screed bed or bedding layers in CM 1:4 complete all as per specified and as directed by Engineer-in-charge.

M&L for Coloured Glazed ceramic tiles 200 x 300 x 6 or 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick screed in CM (1:4)complete all as per specified and as directed by Engineer-in-charge.

S&F in repair vitreous china wash down water closet pan 580x440mm (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as per specified and as directed by Engineer-in-charge.

S&F in repair Vitreous China squatting pan "Orissa" patern size 580x440mm white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, etc including 'P' or 'S' trap complete all as per specified and as directed by Engineer-in-charge.

S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand 15 mm bore PVC connection pipe of lenths 450 mm, 15 mm bore CP pillar tap and waste coupling of size 32 mm and waste pipe of size 32 mm, etc., complete all as per specified and as directed by Engineer-in-charge.

S & F in repair sink without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495 mm x 420 bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.

S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair kitchen plate rack made up of stainless steel 1 mm and of size 900 x600 x250 mm complete all as per specified and as directed by Engineer-in-charge.

S & F in repair Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs 40 mm bore dia of discharge pipe waste coupling of PTMT (60 gm weight) (half or full threaded), complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs 32 mm bore dia of discharge pipe waste coupling of PTMT (60 gm weight) (half or full threaded), complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore CP fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore brass CP mixer for mixing hot & cold water (Exposed Straight legs) with telephonic shower arrangement & Crutch (without hand shower and hoses) arrangement screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.

'S&F in repair cromimum plated health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 m long Easy Flex tube in chrome finish, complete all as per specified and as directed by Engineer-in-charge.

S & F in repair Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge.

'S&F in repair CP towel-ring sqaure, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair brass chromium plated towel rack 600 mm long between flanges & 225 mm wide with lower hanger, complete all as per specified and as directed by Engineer-in-charge.

S & F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as per specified and as directed by Engineer-in-charge.

S&F in repair corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair CP toilet paper roll holder with flap including all necessary fittings, complete all as per specified and as directed by Engineer-in-charge.

Supply and fix in repair bib taps, standard of PTMT 15mm bore of any colour, high pressure, screwed for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15mm angle stop valves cast copper alloy, fancy type with chromium plated for iron pipe or for unions complete all as per specified and as directed by Engineer-in-charge.

S & F in repair chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float and braket and 32 mm bore PVC flush pipe, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15mm dia PVC connection pipe with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repair 100mm dia grating doom of PTMT with minimum weight 25 grams complete all as specified and as directed by Engineer-in-charge.

S&F in repair tank cover including hinging device for PVC tank uptp 500 lit capacity cover complete all as per specified and as directed by Engineer-in-charge.

S&F in repair tank cover including hinging device for PVC tank uptp 1000 lit capacity cover complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC (SWR) 110 mm bore bends complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC (SWR) 75 mm bore bends complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/s SHARMA BUILDERS & ENGINEERS