SPECIAL REPAIR TO WIRING AT CERTAIN OTM BLDGS, PROVN OF AC/EXHAUST FAN/FLAME PROOF LIGHTS,PROVN OF STANDBY POWER SUPPLY AT E-MMS ZONAL HELP DESK VAJRA FSS AND PROVN OF IRON GRILL AT VARIOUS OTM BLDGS IN TECH AREA AT AF STN GWALIOR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Supply, Laying & connecting cable in replacement 1100 Volts grade, stranded aluminum conductor, screened, XLPE insulated, armoured shielded and PVC sheathed cable of 6 Sqmm x 2 core sizes conforming to IS 7098 (Part-I) amended upto date complete all as specified and directed. Make : Havells/Polycab/Plaza. Note :- (i). Lugs/Glands/saddles of suitable size required for fixing of cables in panels/junction boxes /on walls shall be included in the item rate.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and getting out in any type soil etc complete all as specified and directed.

Sand cushioning and spreading clean, dry, fine river sand for UG electric cable in two layers (8 cm thick before laying the cable & 15 cm thick after laying cable) total 23 cm thick including gentle punning the sand upto 18 cm (total thickness) and consolidated around cable for protection of under ground cable complete all as specified and directed. (Note :- Only punned down thickness shall be measured for payment).

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm in soft/loose soil etc complete as specified and directed.

Removing of surplus excavated soil not exceeding 50 M distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply & Laying precast PCC cable concrete/bricks for protection of cable cover LV low voltage type -I flat ISI marked of size 250 mm x 150 mm x 40 mm complete all as specified and directed by Engr-in-charge.

M&L boring of holes under road, pavement, hard standing by manually depth not less than 75 cm for insertion of GI Pipe of size 80 mm bore light grade for short length complete all as specified and directed. Note :- GI pipe 40 mm dia light grade shall be measured and paid separately under relevant item of Schedule 'A'.

Supply and fixing of GI Pipe 80 mm dia light grade for cable protection complete all as specified and directed.

M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC conduct concealed of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, modular terminal boxes closed recessed type. PVC modular board all as required as specified and directed for the following :- (a) One light/ Fan point controlled by one way switch.

(b ) One 5 Amps switch socket combination on independent board.

(c) One 5 Amps socket on same board with other switches.

All as per item No 10.01 here in before but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F in repairs Modular switch 1 way 6A, 1 module single pole 230 V.complete all as specified and directed.

S&F in repairs Modular type switch socket out let 3 pin 6 Amps flush type 230 Volts multipurpose, complete all as specified and directed.

All as per item No-12 here-in-before above but 6 Amps and 16 Amps multipurpose( 3 Pin 16 Amps and one pin 6 Amps controlled by one switch) complete all as specified and directed.

M&L for sub main wiring in replacement of using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm FRLS of voltage rating upto and including 1100 Volts drawn in PVC conduit of suitable size concealed in wall along with one run of PVC existing conduit along-with one run of PVC (Green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. Note:- (i) Two run of single core PVC cable with one run of earth conductor and PVC conduit shall be measured as one unit. (ii) Cost of making good to the disturbed surface to match with the existing is deemed to be included in the quoted rate.

M&L for sub main wiring in replacement of using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm, FRLS of voltage rating upto and including 1100 Volts drawn in PVC conduit of suitable size concealed in wall along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor complete all as specified and directed. Note:- (i) Two run of single core PVC cable with one run of earth conductor shall be measured as one unit. (ii) Cost of making good to the disturbed surface to match with the existing is deemed to be included in the quoted rate.

M&L for sub main wiring in replacement of using four single core PVC insulated, unsheathed stranded copper conductor cable of size 10 Sqmm FRLS of voltage rating upto and concealed in wall including 1100 Volts drawn in and including recessed PVC conduit of dia not less than 32mm with standard accessories, along-with two run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 10 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: (i) Four run of single core PVC cable with two run of earth conductor and conduit shall be measured as one unit.) (ii) Cost of making good to the disturbed surface to match with the existing is deemed to be included in the quoted rate.

M&L for sub main wiring in replacement of using four single core PVC insulated, unsheathed stranded copper conductor cable of size 16 Sqmm FRLS of voltage rating upto and concealed in wall including 1100 Volts drawn in and including recessed PVC conduit of dia not less than 32mm with standard accessories, along-with two run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 16 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: (i) Four run of single core PVC cable with two run of earth conductor and conduit shall be measured as one unit.) (ii) Cost of making good to the disturbed surface to match with the existing is deemed to be includ in the quoted rate.

Supply, fixing, connecting & testing in repair of sheet metal enclosures VTPN DB double door (IP-42 Protection), triple pole and neutral, 4 way DBs for using MCCB,isolators/ MCB,s with having aluminium bus bars suitable for 200 Amps rating complete all as specified and directed. Note : MCCB and MCB's will be measured and paid separately.

Supply, fixing, connecting & testing in repair of sheet metal enclosures VTPN DB double door (IP-42 Protection), triple pole and neutral, 12, 8 way DBs Vertical tipe for using MCCB,isolators/ MCB,s with having aluminium bus bars suitable for 200 Amps rating complete all as specified and directed. Note : MCCB and MCB's will be measured and paid separately.

All as per item 19.01 here-in-before but double door distribution board single pole and neutral, 12 way complete all as specified and directed.

All as per item 19.01 here-in-before but double door distribution board single pole and neutral, 8 way complete all as specified and directed. .

All as per item 19.01 here-in-before but double door distribution board single pole and neutral, 4 way complete all as specified and directed..

All as per item 19.01 here-in-before but double door distribution board single pole and neutral, 4 way complete all as specified and directed.

S&F in repair of , DB sheet metal enclosure 2 way SPN Single door for mounting MCB. all as specified and directed.

S&F MCCB, 4 pole, 400 Amps current rating and ultimate breaking capacity Icu = 36 KA with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed.

All as per item 21.01 here-in-before but MCCB, 4 pole, 350 Amps current rating and ultimate breaking capacity Icu = 36 KA.

All as per item 21.01 here-in-before but MCCB, 4 pole, 250 Amps current rating and ultimate breaking capacity Icu = 36 KA

All as per item 21.01 here-in-before but MCCB, 4 pole, 160 Amps current rating and ultimate breaking capacity Icu = 36 KA

All as per item 21.01 here-in-before but MCCB, 3 pole, 125 Amps current rating and ultimate breaking capacity Icu = 16 KA

All as per item 21.01 here-in-before but MCCB, 3 pole, 100 Amps current rating and ultimate breaking capacity Icu = 16 KA

All as per item 21.01 here-in-before but MCCB, 3 pole, 63 Amps current rating and ultimate breaking capacity Icu = 16 KA

All as per item 21.01 here-in-before but MCB TPN, 63 Amps (`C’ series) having current rating 10 KA

All as per item 21.01 here-in-before but MCB TP, 40 Amps (`C’ series) having current rating 10 KA

S&F in repair MCB 4 pole, 63 Amps,415 volt current rating and ultimate breaking capacity Icu = 10 KA with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed.

All as per item 22.01 here-in-before but MCB SPN, 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

All as per item 22.01 here-in-before but MCB SPN, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

All as per item 22.01 here-in-before but MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.

Supply and fixing in repair 240V 10kA 'C' curve miniature circuit breaker MCB TP, 63 Amps (`C’ series) having current rating 10 KA and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

All as per item 23.01 here-in-before but MCB TP, 32 Amps (`C’ series) having current rating 10 KA, 240V 'C' curve miniature circuit breaker complete all as specified and directed.

All as per item 23.01 here-in-before but MCB SP, 40 Amps (`C’ series) having current rating 10 KA, 240V 'C' curve miniature circuit breaker complete all as specified and directed.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB DP, 63 Amps (`C’ series) having current rating 10 KA, 240V 'C' curve miniature circuit breaker complete all as specified and directed.

All as per item 24.01 here-in-before but MCB DP, 40 Amps (`C’ series) having current rating 10 KA, 240V 'C' curve miniature circuit breaker complete all as specified and directed.

All as per item 24.01 here-in-before but MCB DP, 32 Amps (`C’ series) having current rating 10 KA, 240V 'C' curve miniature circuit breaker complete all as specified and directed.

Supply& Fixing in repairs LED Batten T/L fittings 1x20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed Note: Necessary Nut, bolts for fixing is deemed to be included in the quoted rate.

Supplying, fixing & testing decorative surface mounting 36 watt LED full out put luminaries which provides soft light glare free symmetrical illumination suitable for Armstrong/Grid ceiling, white powder coated sheet steel housing with paralite P5 square parabolic louver block in metallic perforated frame for low glare, aluminium reflector and accessories ,connecting the same to electric source with and including copper conductor 23/0.0076 flexible twisted twin core cable , including all accessories and fixing arrangements for fixing the light fitting to false ceiling complete all as specified and directed.

S&F in replacement of 10 Watt LED bollard light one meter long with Opel acrylic diffuser and IP-65 protection including necessary PCC base work complete all as specified and directed.

Supply and fixing in replacement of LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed

Supply and fixing in replacement of LED street/security light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified and directed.

Supply and fix in replacement of triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps all as specified and directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick burried directly in grond earth pit not less than 2.25 mtrs deep below ground level with top edge of the plate not less than 1.50 mtr and below nomal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electric plate No-5 conneced to earthing test point all as specified or indicated including testing on completion. Note : Necessary cost of excavation returning filling , PCC chamber Funnel and PCC cover is deemed to be included in the quoted rate.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm dia galvanised ironomplete all as specified and directed.

Supply, install, commissioning and testing of split type wall mounted Air conditioner of capacity 1.5 TR (4500 K Cal/hr) single phase, (Non CFC/HCFC) suitable for 230 Volt + 10% , 50 Hz, AC supply complete with cordless remote control unit , minimum 3 star rating EER of 3.2 non inverter type and above complete comprising of following :- (a) Indoor unit copper coil with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door unit comprising . Compressor with motor,. air cooled copper condenser with fan and motor .unit shall be installed out side the building/ on roof. (c) Refrigerant copper pipe for suction and discharge line with insulation , condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable. (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. (e) PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in plinth suitable for installation of outdoor unit or powder coated MS bracket fixed on wallas per Manufacture's instruction with necessary grouting MS hold fast, bolts, washers duly painted and making good to disturbed surfaces suitable for installing outdoor unit of 1.5 TR AC complete all as specified and directed. (f) Electrical cable required to connect out door unit and indoor unit to voltage stablizer inclusive in above rate.

Supply, install, commissioning and testing of split type wall mounted Air conditioner of capacity 2 TR (6000 K Cal/hr) single phase, (Non CFC/HCFC) suitable for 230 Volt + 10% , 50 Hz, AC supply complete with cordless remote control unit , minimum 3 star rating EER of 3.2 and above complete comprising of following :- (a) Indoor unit copper coil with three speed blower fan of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water. (b) Out door unit comprising . Compressor with motor,. air cooled copper condenser with fan and motor .unit shall be installed out side the building/ on roof. (c) Refrigerant copper pipe for suction and discharge line with insulation , condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing unit with suitable size of copper cable. (d) Making good the disturbed surface to match the existing surface after plugging the hole etc. (e) PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in plinth suitable for installation of outdoor unit or powder coated MS bracket fixed on wallas per Manufacture's instruction with necessary grouting MS hold fast, bolts, washers duly painted and making good to disturbed surfaces suitable for installing outdoor unit of 2 TR AC complete all as specified and directed. (f) Electrical cable required to connect out door unit and indoor unit to voltage stablizer inclusive in above rate.

M & L for sub main wiring with two runs of single core 4 Sq.mm for phase conductor and one run of single core 4 Sq.mm as earth wire of multi stranded copper conductor FR-LSH PVC insulated unsheathed cable conforming to IS : 694 drawn through in & including PVC casing & capping with fixing accessories on wall/roof surface as per relevent IS standard not less than 25 mm width and all as complete specified and directed.

Supply and Fixing industrial type socket with plug top, Single pole and netural and earth plug 240V, 20 Amps with steel enclosure and one MCB SPN 20 Amps complete all as specified and directed.

Supply and fixing voltage stablizer electronic type for automatic operation single phase naturally air cooled, indoor type, wall mounted for input variation between 170 V to 280 V with output voltage stablized at 200V to 245 V with accuracy of + 1% and of capacity 5.0 KVA complete all as specified and directed Make:- V-Guard,Blue Bird, AE

Supply and fixing copper tubing of special annealed pressure copper of size 1/4" bore

Supply and fixing copper tubing of special annealed pressure copper of size 1/2" bore

Supply and fixing PVC nylon braided industrial quality drain pipe of 20mm inner bore including fixing accessories on wall/roof etc all as directed

Supply & Laying Bricks; common burnt clay building bricks, sub-class ‘A’ for cable protection designation 75 complete all as specified and directed by Engr-in-charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 16 Sqmm 4 core Note : Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 25 Sqmm 4 core Note : Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc.

Supply and Fix, for MCCB , 4 pole 63 Amps thenal magnetic type 415 Volts with breaking capacity 10 KA complete all as specified.

S&F in repair PVC Junction box , IP-55 protection, size 300X200X105 ready made type and entry of gland and fixing arrangement to fix the box on plinth/wall by providing MS clamp and nut bolt, terminal plate and suitable capacity MCB Complete all as specified and directed by Engineer-in-Charge.

S&F , DB sheet metal enclosure 4 way Single door SPN Complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring in replacement using four single core PVC insulated, unsheathed stranded copper conductor cable of size 10 Sqmm FRLS of voltage rating 1100 Volts drawn in and including concealed PVC conduit of dia not less than 20mm with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 10 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: four run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Material and labour for flame proof point wiring for one light point or one socket point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, FRLSH PVC insulated & unsheathed cable, 1100 volts grade in and including stove enameled black, rigid steel conduits of size not less than 20 mm dia (Medium grade) fixed on surface of walls/ceilings as directed with all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core FRLSH, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly / fittings etc. complete all as specified and directed NOTE : (i) Old junction boxes retrieved in serviceable conditions shall be re-used in the work. However, additional junction boxes, if any required, for making new point wiring other than the quantity of junction boxes retrieved from taking down of point wiring, shall be measured and paid for separately as ‘’supply only’’ under appropriate item of Schedule `A' but fixing element of any type of junction boxes new or old is deemed to be included in the rates quoted by the contractor for the above item. (ii) Wiring shall be terminated and connected to the relevant switch / controlling switch gear and relevant fittings / sockets all as directed and controlling switch / fittings shall be measured and paid for separately under appropriate item of Schedule `A'.

All as per above item here-in-before but point wiring with using 2.5 Sqmm (nominal area) stranded copper conductor, single core, FRLSH PVC insulated & unsheathed cable for 16 A Flame proof Switch and socket

Supply and fix flame proof switch push button, termination box Gas Group II A , II B , as per IS/IEC 60079-1 : 2014, weather proof IP– 66 AS PER IS/IEC60 5 2 9 : 2 0 0 1(Reaffirmed 2014)die cast aluminium body,SS name cum warning plate, 10 Amp, 02 Nos cable entry, 4 Nos terminals complete with duly certified by CIMFR,PESO or BIS.

Supply and fix flame proof switch socket & plug combined 16 Amp , termination box Gas Group II A , II B , as per IS/IEC 60079-1 : 2014, weather proof IP – 66 AS PER IS/IEC60529:2001 (Reaffirmed 2014)di\e cast aluminium body,SS name cum warning plate, 16 Amp, 02 Nos cable entry, 4 Nos terminals, with interlocking facility complete with duly certified by CIMFR,PESO or BIS.

Supply and fixing flame proof wall mounted fan 12" sweep with 3 blade complete with accessories Epexy light gray 900RPM Gas Group II A , II B , II C as per IS/IEC 60079-1 : 2014, WEATHER PROOF IP – 65 AS PER I S / I E C 6 0 5 2 9 : 2 0 0 1 (Reaffirmed 2014) with aluminium non sparking blades cast iron motor with F class insulation cable entry 1 No’s M20 / ½ “ NPT / EQUIVALENT, Single phase duly certified by CIMFR,PESO or BIS complete all as specified and as directed.

Supply and fixing LED light fitting 2 X 16 watt flame proof, CMRI certified recommended for gas/vapour group of IIA, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixture driver, holders connectors etc. Complete all as specifed and directed alongwith all accessoreies prewired and including connection uo with three core flexible copper conductor cable with suitable size.

M&L for Framed work of MS steel section as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, MS iron grilled doors with or without MS plates, ladders, framed balusters, pintle hinges and similar work conforming to Fe.290.Gde-E-165. Make: ISI Marked as appproved by GE

Cutting holes in brick walls / RCC column and inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 Type B-1 and plaster in CM 1:3 incl necessary distempering /weather coat paint to match with the adjacent surface as specified and directed by Engr-in Charge .

S&F Bands, straps, supports or stays for rainwater, nut bolts, stays large gates, hook and special/purpose made hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, MS plates etc incl welding drilling holes and necssary fabrication complete all as directed by Engr-in-Charge

M&L for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10m width or girth complete all as specified and directed.

Cutting channels in PCC/Tiled flooring with machenical cutter for inserting channels and making good dismantled portion in cement concrete 1:2:4 Type B-1 and plaster in CM 1:3 incl necessary.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, floor finish, kerbs, benching or mud stops, slightly rounded chamfered angles and throating incl necessary form work.

Supply & fixing flame proof push button 10Amps in ML6 metal enclosures, conforming to cat no SSPL/2C/1010 of complete all as specified & directed.

Supply and fixing LED light fitting 1 x 40 watt flame proof, CMRI certified recommended for gas /vapor group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die casy aluminium housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply & Fixing and testing Flame proof sheet metal enclosure with double door SPN DBs, 8 way, 240 Volt complete all as specified and directed.

Supply & Fixing flame proof exhaust fan of size 18" 0.25 HP, single phase 230 volts, and connceted to electric connection complete all as specified and directed. Note- The cost of making hole on the wall and making good to the distrubed surface are deemed to be included in the quoted rate.

M&L for surface/concealed submain wiring as required with two single core FRLS PVC insulated and unsheathed copper stranded conductor of size 4 Sqmm 1100 Volts and one run of copper stranded conductor of size 4 Sqmm for continuous earthing drawn in and including rigid non metallic PVC conduit pipe ISI marked of size not less than 20 mm dia including to connect their incoming/outgoing electric connections by using required sizes of lugs/thimbles as well as flexible conduit of suitable sizes shall also be used at any open surfaces of conductor complete all as specified and directed. Note :- (i) Two single core cable and one run of earth copper conductor including conduit will be measured and paid as one unit length. (ii) Cost of making good to the disturbed surface to match with the existing is deemed to be included in the quoted rate.

M/S NIRMAL SINGH DHANJAL

Akarsha Enterprises

M/s Anupam Construction Co.

M/S Amit Traders

M/s KKPARASHAR

Lall Electronics

Kumar Sales Corporation