Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹37.3 L+₹4.6 L (13.9%)Rejected-Finance 194 B 14 O BLOCK KIDWAI NAGAR KANPUR UP 208023 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208023 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹37.6 L+₹4.9 L (14.9%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹37.7 L+₹5.0 L (15.2%)Rejected-Finance BANGLOW NO 26 GUPTAR GHAT ROAD CANTT FAIZABAD 224001 | FAIZABAD | AYODHYA | UTTAR PRADESH | 224001 | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹38.1 L+₹5.4 L (16.5%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | Pundir Construction Co. L4 | R K BROTHERS L6 | A K BANDHUS L2 | GIAN ENGINEERS L7 | D K Engineers and contractors L8 | JYOT BUILDERS L1 | M/S EASTERN TECHNOCRAFTS L5 | SAI RAM ASSOCIOATES L9 | M/S IQRA CONSTRUCTION L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each all as specified and directed By Engr-In-Charge. | 100 | Each | 75 ₹7,500 | 70 ₹7,000 | 121 ₹12,100 | 100 ₹10,000 | 401 ₹40,100 | 75 ₹7,500 | 50 ₹5,000 | 30 ₹3,000 Lowest | 50 ₹5,000 |
| 2.00 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified and directed By Engr-In-Charge. | 275 | Each | 100 ₹27,500 | 80 ₹22,000 | 151 ₹41,525 | 100 ₹27,500 | 501 ₹1,37,775 | 85 ₹23,375 | 50 ₹13,750 | 35 ₹9,625 Lowest | 60 ₹16,500 |
| 3.00 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed By Engr-In-Charge. | 400 | Sqm | 40 ₹16,000 | 70 ₹28,000 | 71 ₹28,400 | 80 ₹32,000 | 95 ₹38,000 | 39 ₹15,600 Lowest | 95 ₹38,000 | 50 ₹20,000 | 70 ₹28,000 |
| 4.00 | M&L MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 all as specified and directed By Engr-In-Charge. | 4,500 | Kg | 78 ₹3,51,000 Lowest | 95 ₹4,27,500 | 91 ₹4,09,500 | 120 ₹5,40,000 | 105 ₹4,72,500 | 88 ₹3,96,000 | 110 ₹4,95,000 | 90 ₹4,05,000 | 95 ₹4,27,500 |
| 5.00 | Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(+ - 0.2 mm). Window profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket 1.2 + - 0.2mm thick galvanized steel frame (30mmx18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated ),steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories .(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose.)Area n exc 2.00 Sqm Each Note-i)The design of window shall be approved by Engr in charge. ii)Provn of opening of 1.5 tonn AC shall be provide in window shutter as per directed by Engr in charge and as per requirement | 292 | Sqm | 7,300 ₹21,31,600 | 7,600 ₹22,19,200 | 7,191 ₹20,99,772 | 8,000 ₹23,36,000 | 8,100 ₹23,65,200 | 6,049 ₹17,66,308 Lowest | 7,500 ₹21,90,000 | 7,800 ₹22,77,600 | 7,700 ₹22,48,400 |
| 6.00 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel
Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of
zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.
(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area not exceeding 1.00 sqm each | 87 | Sqm | 9,500 ₹8,26,500 | 8,500 ₹7,39,500 | 7,991 ₹6,95,217 | 9,000 ₹7,83,000 | 7,800 ₹6,78,600 | 8,299 ₹7,22,013 | 7,500 ₹6,52,500 Lowest | 13,100 ₹11,39,700 | 8,000 ₹6,96,000 |
| 7.00 | Providing and fixing factory made uPVC white colour fixed glazed window/ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel
Frame (28mm x 21.5mm. T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of
zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.
(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area not exceeding 1.00 sqm each | 12 | Sqm | 7,000 ₹84,000 | 8,400 ₹1,00,800 | 7,091 ₹85,092 | 7,800 ₹93,600 | 8,500 ₹1,02,000 | 5,249 ₹62,988 Lowest | 7,500 ₹90,000 | 9,000 ₹1,08,000 | 8,000 ₹96,000 |
| 8.00 | M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed. | 300 | Sqm | 790 ₹2,37,000 | 650 ₹1,95,000 | 791 ₹2,37,300 | 700 ₹2,10,000 | 721 ₹2,16,300 | 599 ₹1,79,700 | 725 ₹2,17,500 | 600 ₹1,80,000 | 500 ₹1,50,000 Lowest |
| 9.00 | M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading exc 0.5 sqm in each pane complete all as specified and as directed. | 50 | Sqm | 790 ₹39,500 | 680 ₹34,000 | 791 ₹39,550 | 700 ₹35,000 | 851 ₹42,550 | 888 ₹44,400 | 725 ₹36,250 | 850 ₹42,500 | 550 ₹27,500 Lowest |
| 10.00 | M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface finished even and fair on internal surfaces of wall. | 150 | Sqm | 150 ₹22,500 | 130 ₹19,500 Lowest | 191 ₹28,650 | 200 ₹30,000 | 255 ₹38,250 | 155 ₹23,250 | 180 ₹27,000 | 150 ₹22,500 | 170 ₹25,500 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
18 Nov 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Ayodhya Cantt
Asst Garrison Engineer (I), Military Engineer Services, Ayodhya Cantt PIN-224001
REPAIR REPLACEMENT OF OLD/UNSV/RUSTED WINDOWS OF OTM/OFFICERS MD ACCN WITH UPVC WINDOW ALONGWITH CERTAIN ALLIED WORK UNDER AGE(I) AYODHYA CANTT
2025_MES_737305_1
8400/136/E8
Open Tender
Civil Works
Item Rate
270 days
Ayodhya Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Ayodhya
₹1 L
Yes
11 Mar 2026
28 Oct 2025
20 Nov 2025
28 Oct 2025
18 Nov 2025
12 Nov 2025
Amount
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each all as specified and directed By Engr-In-Charge.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified and directed By Engr-In-Charge.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed By Engr-In-Charge.
M&L MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 all as specified and directed By Engr-In-Charge.
Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(+ - 0.2 mm). Window profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket 1.2 + - 0.2mm thick galvanized steel frame (30mmx18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated ),steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories .(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose.)Area n exc 2.00 Sqm Each Note-i)The design of window shall be approved by Engr in charge. ii)Provn of opening of 1.5 tonn AC shall be provide in window shutter as per directed by Engr in charge and as per requirement
M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.
M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading exc 0.5 sqm in each pane complete all as specified and as directed.
M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface finished even and fair on internal surfaces of wall.
M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer incl 1mm thick wall care putty complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.
A K BANDHUS (BID ID -3477294)
M/S IQRA CONSTRUCTION (BID ID -3477052)
Pundir Construction Co. (BID ID -3476706)
M/S EASTERN TECHNOCRAFTS (BID ID -3477157)
R K BROTHERS (BID ID -3477169)
GIAN ENGINEERS (BID ID -3477026)
D K Engineers and contractors (BID ID -3475775)
SAI RAM ASSOCIOATES (BID ID -3477277)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
0.45 MB
Tender Documents
Tender Documents • 1.17 MB
BOQ
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .