REPAIR TO FLOORING JOINERY PLASTERING ROLLING SHUTTERS AND CERTAIN MISC REPAIRS FOR MD AND OTM ACCN AND REPAIR TO WATER PROOFING TREATEMENT GALVALUME SHEET PROOFING MP TILE ROOFING FALSE CEILING AND OTHER CONNECTED WORKS FOR CERTAIN BLDGS UNDER AGE B

Amount

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for suken floor,roof padding etc complete all as directed.

Demolition of cement concrete (reinforced ) as in kitchen platform,cover slab etc complete all as spcified and as directed.

Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar all as spcified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for rafter,purlin etc all as spcified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), remoing serviceable tiles to store and rubbish off the premises all as spcified and as directed.

M&L PCC 1:4:8 type D2 with 40mm graded stone aggregate as in foundation ,fliiing and mass concrete as in sunken floor,sub base floor concrete etc complete all as spcified and as directed.

Material and labour for bituminous primer n.exc 0.35Ltr/sqm on concrete surface of any description complete all as dircted and specified

Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete as in sunken floor/ on any concrete surface all as specified and directed.

M&L cement concrete type B0, 1:2:4 using 12.5mm graded stone aggregate 25mm thick as in flooring complete all as specified and as directed

M&L for rendering 15mm thick in cement plaster 1:3 mixed with liquid water proofing compound of approved make as per manufacture instruction on wall /floor surface of sunken floor etc all as specified and as directed. Note : Water prrofing compound shall be measured and paid separatly.

Supply only liquid water proofing compoundof approve make all as spcified and as directed.

M&L 75mm thick PCC 1:3:6 type C2 (40 mm graded aggregate) as in plinth priotection,pavings,sub base of floor etc complete all as spcified and as directed.

M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

M&L for non skid ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as spcified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x600x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match placed in rendering 10mm thick in CM 1:4 complete all as spcified and as directed.

M&L for Light shade coloured Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and scantling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as spcified and as directed.

M&L for Light shade coloured Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado/skerting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar (1:4) complete all as spcified and as directed.

Taking down cement or cement lime plaster, any description all as spcified and as directed.

Material and labour for rendering15mm thick in Cement Mortar (1:6) on concrete/brick masonry surfaces of wall, finished even and smooth complete all as spcified and as directed.

Material and labour for rendering15mm thick in Cement Mortar (1:4) on concrete/brick masonry surfaces of wall, finished even and fair complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls incl preparation and applying two coat of distemper oil emulsion washable on new surface over a coat of primer all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls incl preparation and applying two coat of exterior emulsion anti-fungal weather proof paint on external wall over one coat of primer complete all as spcified and as directed. NOTE: The painting work to be executed by authorised applicator of the manufacturer. Make :-APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction as directed NOTE: The painting work to be executed by authorised applicator of the manufacturer. Make :-APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac

M&L for precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) built in PCC type C-1, 1:3:6 (Using 20mm garded stone aggregate) and setting in mortar,complete, in walls and set in CM 1:4 all as specified and as directed

Material and labour for Pre-cast cement concrete block masonry with solid blocks,in type C-1 (1:3:6) using 20mm graded stone aggragate exc. 10 cm in width and setting in mortar(1:6), complete all as directed.

M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate )as in slab supproted on walls, beam and columns in floor, roof/cooking platforms,shelves etc all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking platforms etc for fair finished surface complete all as spcified and as directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed.

All as per item No.29 above but using 6 to 8mm dia bars complete all as spcified and as directed.

M & L for PCC (1:2:4 type B-0 (using 12.5mm graded stone aggregate) lintels upto 1.5m clear span, cills, steps; seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as in roof padding, coping,kerbs, bed plates, hold fast blocks, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed.

Taking down chowkhats or frame(PVC or wooden) nexc 1.5 Sqm each without taking off shutters from frame, and making good surface all as spcified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n exc 4 Sqm each without taking off shutters from frame all as spcified and as directed.

Taking down shutter of any description exc 1 sqm but n. exc 2 sqm each all as spcified and as directed.

Taking down shutter of any description n.exc 1 sqm each all as spcified and as directed.

Dismantling of Aluminium/UPVC partition,windows and doors of any discription and any size including all fitiings,mongeries ,glass etc including making good the disturbed surface of floor or and wall if any complete all as spcified and as directed.

Supply ansd fix UPVC windows : Factory made UPVC white sliding windows with glazing all as per manufacturer's direction and following specifications :- (i) Window panel shall be 2.5 track frame with upvc profile sedction of size 95mmx 54mm having outer wall thickness of 2mm(+/- 0.3mm ) with sliding pattern with glazed and mesh shutter. (ii) window glass shutter for (front panel )shall be made of 66mmx 42.5mm having outer wall thickness of 2.0mm(+/- 0.3mm) . (iii) Window mesh shutter shall be made of 52mm x 22mm.Gauge shall be suiable wire gauge SS304 coated/fiber black mesh. (iv) All profile of frames and sash shall be reinforced with galvanised miuld steel section of 1mm wall thickness at wherever reauired. (v) All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanicasl joints.All welded joints are to be neatly trimmed & features grooved /raised nib finish so as to make nthe finished products free from all sharp edges & burrs. (vi) The lock shall be single point topuch lock.All hardware like wheel,lock should be screwed .System shall be provided with suitable upVC beading size of 25mm x15.5mm for glazing of size 4mm/5mm pinhead /plain glass as directed. (vii) The profiles shall be cut to lenth and welded 45 degrees . (iii) The complete window shall be fixed into the prefinished opened placec by drilling & fixing thorugh the outer frame using high quality fasteners & silicon sealent is applied to fill up the gap between wall & window frame for leak proof installation and completion. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.

Supply and fix factory made UPVC panel door shutters with frames with approved make and section and colour with all necessary fixtures like hinges, handles, bolts etc all as specified and directed.the detailed specification as follows. (i) Door frame shall be upvc profile sedction of sizesize of 60mm x 60mm wall thickness of 2mm(+/- 0.3mm ) with openable pattern.) (ii) Door shutter with sash made of 80mm x60mm and panel shall be 10 to15mm thick(+/- 0.3mm ) .All profile of frames and sash shall be reinforced with galvanised mild steel section of 1mm wall thickness at wherever required. (iii)All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanicasl joints.All welded joints are to be neatly trimmed & features grooved /raised nib finish so as to make nthe finished products free from all sharp edges & burrs. (vi)The profiles shall be cut to lenth and welded 45 degrees

Supply and fix factory made UPVC Mesh door shutters with frames with approved make and section and colour with all necessary fixtures like hinges, handles, bolts etc all as specified and directed.the detailed specification as follows. (i) Door frame shall be upvc profile sedction of sizesize of 60mm x60mm wall thickness of 2mm(+/- 0.3mm ) with openable pattern.) (ii) Door shutter with sash made of 80mm x60mm) .All profile of frames and sash shall be reinforced with galvanised mild steel section of 1mm wall thickness at wherever required. (iii)All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanicasl joints.All welded joints are to be neatly trimmed & features grooved /raised nib finish so as to make nthe finished products free from all sharp edges & burrs. (vi)The profiles shall be cut to lenth and welded 45 degrees (vii) Gauge shall be suiable wire gauge SS304 coated/fiber black mesh.

Supply and fix factory made UPVC ventilator with The profile for costruction of UPVC ventilator frame will be of overall size 60x58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. The corners will be plastic welded.The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The ventilator will be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 2 nos on each sicde. The 3 nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5 mm thick pinhead glass. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose.

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hard wood plain solid, straight chowkhats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints all as spcified and as directed.

M&L for 2nd class hard wood Glazed and skeleton shutter 35mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats all as spcified and as directed.

S&F for 2nd class HW glazed and skeleton, shutters, divided into squares to receive glass, gauge etc (with sash bar) with plain chamfered or rounded, mitredand rebated sash bars, any numbers the size of member of shutter as specified in SSR Pt-I clause 8.24 (b) window & ventilaters shutters thickness 30 mm and fitted to chowkat. complete all as specified and directed

M&L 4 mm thick figured glass, ordinary quality and glazing with oil putty/beads in square n exc 0.5 sq. m in each panes complete all as spcified and as directed.

M&L 4 mm thick plain glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane incl hacking out old broken glass (any thickness, size, quality or description) from wooden frame glazed with putty or fixed with beads all as spcified and as directed.

M&L 4 mm thick figured glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane incl hacking out old broken glass (any thickness, size, quality or description) from wooden frame with putty or fixed with beads all as spcified and as directed.

S&F galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with Tinned Tacks or wire staple as directed.

All as per per item No 49 above but fixed in repairs (wooden frames/steel frames) all as spcified and as directed.

S&F MS Butt hinges medium weight cold rolled & fixed 100 mm long all as spcified and as directed.

S&F MS Butt hinges medium weight cold rolled & fixed 75 mm long all as spcified and as directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised all as spcified and as directed.

S&F 100mm extruded aluminium alloy handles, fabricated type, anodised all as spcified and as directed.

S&F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed all as spcified and as directed.

S&F 100mm aluminium anodised, barrel tower bolts of extruded section and fixed all as spcified and as directed.

Supply & Fixing 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as spcified and as directed.

Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer all as spcified and as directed.

Sujpply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

M&L for framed work such as grills, gratings,etc.with angle,joist,tee/tubular sections and with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 including hinges,hold fast,etc all as specified and as directed

S&F mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, prong ,water tank frame work,monkey gauge etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed

M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc crome on new steel surface of any description over 10 cm width or girth not otherwise described incl preperation of surfaces complete all as specified and as directed

M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc crome on new steel surface of any description n exc 10 cm width or girth not otherwise described incl preperation of surfaces complete all as specified and as directed

Dismantling boarding any description fixed in any position with nails including iron/SS mongeries

S&F HDHMR Board Board 18mm thick both side laminated any colour, as in PVC Bedding Shutter vertical support and horizontal shelfs including necessary fittings of screws/MS Brackets in kitchen cupboard and bedroom cupboard in repairs complete all as spd and directed. Make :- HDHMR board : ACTION TESA or techno commercially equivalent

S & F soft close stainless steel hinges 75mm complete all as specified and as directed. Make : EBCO or techno commercially equilavent

S & F stainless steel handle 150mm long complete all as specified and as directed. Make : RICH or techno commercially equivalent.

S & F stainless steel telescoping channel for drawer including necessary fiiting upto length upto 600mm complete all as spd and directed.

M&L for prelaminated particle board exterior grade 18/19 mm thick prelaminated one side with decorative choice lamination one side and balancing white lamination on other side fixed with screw with timber frame incl lipping 6 mm thick for external teak wood fixed with nails complete all as spcified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flange 40 mm all as spcified and as directed.

S&F magnetic catcher for cubboards in repairs all as specified and directed

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as spcified and as directed.

S&F 25mm dia aluminium coated design curtain rod antique finish fixed to double bracket matching with curtain rods including taking down old GI curtain rods complete all as specified and as directed.

Dismantling of ceiling boards or insulation boards any thickness including cover fillets all as spcified and as directed.

M&L for providing gypsum board false ceiling 10-12mm thick fixed with standard GI frame work with GI fixing channels @ 1220mm c/c and inter spaced at 610mm c/c the main fixing channels shall be fixed through GI channels suspenders from roof @ 1200 c/c, main and inter connected channel shall be fixed through fasterners clips as per manufacturers instructions with and including plaster of paris decorative type cornice all around at the junction of wall and ceiling etc including appying two coats of oil bound distemper over one coat of approved primer complete all as specified and directed.

S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixedwith hidden screws including aluminium frame work frame work complete all as specified and as directed.

Supply and fix in repair stainless steel kitchen baskets(SS-304) of size 544mm x505mmx200mm complete all as specified and directed. Make :EBCO cat No: RA-BCCS1-21-20-8 or equivalent in HETTICH/KAFF/GODREJ

Supply and fix in repair stainless steel kitchen baskets(SS-304) of size 544mm x505mmx100mm complete all as specified and directed. Make :EBCO cat No: RA-BCCS1-21-20-4-CT or equivalent in HETTICH/KAFF/GODREJ

Supply and fix in repair stainless steel kitchen baskets(SS-304) of size 530mm x505mmx200mm complete all as specified and directed. Make :EBCO cat No: RA-21-20-8 or equivalent in HETTICH/KAFF/GODREJ

Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall all as spcified and as directed.

S & F in repairs Viterous china wash down water closet pan (pedestal pattern) with "P" or "S" trap incl fixing bolts, PVC bend, seat cover and connecting to PVC (SWR) pipe complete all as specified (Excl flush tank) complete] all as spcified and as directed.

S&F in repairs PVC valveless, symphonic action type low level flushing cistern(Duel flush) white with inlet, ball valve, float and handle etc complete capacity 10 litres incl brackets including plush pipe connected to IWC/EWC complete all as spcified and as directed.

S&F in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete (Excl flush tank)

S&F in repair wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower)Make: Cat No G4617A1 of Parryware/ F730022 of Hindware / CON -281KN of Jaquar all as specified and directed.

Supply and fix in repairs two way Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS as per Cat No.CON-041 of Jaquar or T3534A1 of Parryware or specified makes, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed.

S&F in repair health faucet Make:Cat No. E8342A1of Parryware /F160001 of Hindware/ ALD-CHR 565 of Jaquar including 1.2m long flexible tube and wall hook complete all as specified and as directed.

S&F in repair over head shower 200 mmx200mm including shower arm 20mm dia & 375 mm long round shape with 90 ° bend for wall mounted showers of with flange of Make: Cat No T9975A1,T-9802A1 of Parryware / F160142,F160024 of Hindware/ OHS-CHR-1619,SHA-479L450 of Jaquar or equivalent all as specified and directed .

Supply and fix in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquar or G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed.

S & F in repair Single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as spd and directed Make- Cat No G3335A1 of Parryware/Cat No F320027 of Hindware/Cat No DRC-37165 of Jaquar or equivalent all as specified and directed..

S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed.

S&F in repair 100mm dia PVC floor multi trap (circular/sqaure )with and grating of size (100 x 100 mm or 10mm dia ) complete all as specified and as directed.

Supply and fix 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcm in any length with rubber ring joint complete all as specified and as directed.

S&F in repairs coloured PVC toilet cabinet of size 430mm x330mm with looking mirror including repairing the disturbed surfaces to match with existing.(Make: Pyayag- cat -551 or equivalent) all as spcified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically providedas in Rood padding,Kerb,Coping ,parepet wall etc complete all as spcified and as directed.

Taking down existing water proofing treatment on the roof, cleaning with wire brush etc., and removing debris outside MD land complete all as specified and as directed.

Taking down steel tubing and connections of 25 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Dismantling Plain or corrugated/plain steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings,Fascia etc complete all as directed

Taking down SWR pipe of any description like AC pipe/ PVC pipe of any description or any dia including complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in Cement Mortar 1:4 mixed with liquid water proofing compound as per manufacturer's instructions on on fair faces of concrete surfaces like roof slab,suknen floor etc complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately

M&L for cleaning the surface to remove all dust, dirt etc including Priming the surface with one coat of Smartcare Bituminous primer of make -Asian Paints/ equivalent to enhance the bonding properties. Providing and laying of protective Geotextile fabric 45GSM with proper overlaps. Supplying and applying two coat of single component, elastomeric,pitch modified PU coating Smartcare Flexiseal PU or approved equivalent with minimum elongation of 300% and tensile strength of 2 N/mm2 as per ASTM D412 and Shore A Hardness of 90 as per ASTM D 2240. The PU Coating shall have crack bridging ability of 2mm. The system consists of applying the water proofing treatment @ 1.2 Kg/ Sqm and shall havecrack bridging ability of 2mm etc complete as per manufacturer's instruction and as directed by Engr-in Charge.Note: The treatment should be carried out by the authorised applicator of the company

M&L for heavy duty vitrified unpolished porcelain floor tiles of size 300 x 300mm, 10mm thick of make Neo Deccan Natural of somany or Endura of Johnson or equivalent of other specified makes suitable for heavy vehicle movement, laid in floors /skerting of parepet etc of pattern as approved, pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specifiedset and jointed with Ezy Grout with spacers of somany to match complete all as specified and as directed.

Material and labour for Rendering in Cement Mortar (1:6) 10mm thick on block masonry surface or concrete surface surfaces, finished even and smooth complete all as specified and as directed..

Material and labour for rendering 15mm thick in Cement Mortar 1:4 mixed with liquid water proofing compound as per manufacturers' instructions on PCC block masonry surface or concrete surface of any description finished even and fair complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately.

Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm ,in watering and removing surplus soil to a distance n exe 50m and making good surface in soft /loose soil all as specified and directed.

M&L for Cement concrete type C-2 (1:3:6) using 40mm graded stone aggregate as in foundations,filling and mass concrete all as spcified and as directed.

M & L for mild steel work as in tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members N exc 4 kg complete all as specified and as directed.

S&F prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenth of 550MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as spd and directed

S&F Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Barge board etc fixed with self tapping screws as specified.

M&L cement concrete 1:3:6 type C-1 (20mm graded agg) 75 mm thick as in Plinth protection/and pavings finishing cement concrete surface even and fair without using extra cement complete all as specified and directed

M&L Chequered cement concrete coloured tiles 300mm x 300mm and25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 15 mm thick screed bed in cm 1:6 complete all as specified and directed

M&L Complete removal of existing treatment on wall by scrapping, washing, rubbing down and stopping of distempered and applying two coats of oil bound distemper over a coat of primer(chalk white prim er) on walls all as specified and directed .

Complete removal of existing treatment on external walls (Plastered or RRM surface) by wire brushing, crack filling & Bio-wash to fight microbial growth one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger complete all as per manufacturer instruction as directed.

M&L Preparing newly plastered surfaces of external walls and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger complete all as per manufacturer instruction as directed.

S&F Plain, black, mild steel sheeting, 0.63mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and as directed.

S&F 25 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

S&F in repair 25mm bore, Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed,weight 455 gms complete as specified and as directed.

S&F in repair 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F in repair 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position of capacity exc 250 Ltr but n.exc 500 litres complete all as specified and as directed.

All as per item No 128 above but water tank of capacity exc 500 litres & n.exc 1000 litres complete all as specified and directed.

Supply and Fix, 1000 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) all as specified and as directed including dismantling old un serviceable tank complete . Make: Sintex/Polycon/Vectus

Supply and Fix, 500 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) all as specified and as directed including dismantling old un serviceable tank complete . Make: Sintex/Polycon/Vectus

Demolition of Old unserviceable overhead RCC water storage tank of capacity exc 500 ltr but not exc1000 ltr on roof slab including necceary cutting,drilling,icluding making good the disturbed surafce of roof area with appropriate concrete mix as directed by the Engr in charge. The rate shall be coated including necessary labour,tools,scafolting up to double storey and including removing debbris up to 5KM from the Def land .

Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work such as rafter,beam etc complete all as specified and as directed

Dismantling wooden Battens for tiles, shingles etc, of any size including tilting filletswith spacing exc 15 cm complete

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets,barge board etc any thickness, including cover fillets.

Supply and fixing 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. all as spcified and as directed.

Supply and fixing 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 all as spcified and as directed.

M&L for second class hardwood clean sawn battern for MP/tiles exc 5 Sqcm and not exc 15 sqcm in sectional area at 30 cm centres

S&F 2nd class hard wood scantling as in rafters, purlins, trusses etc. clean sawn all as specified

M&L for roof tile, Mangalore pattern, interlocking at side joints, laid dry all as specified

Fixing only for roof tile, Mangalore pattern, interlocking at side joints, laid dry all as specified

M&L in ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified

M&L 2nd class Hard wood decorative Weather boarding, wrought, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed to wooden frame work as dircetd.

M&L for Providing Gypsum board False ceiling using 12mm thick Gypsum board panels of size as approved by GE, fixed with staples on powder coated standard galvanized iron snap grid frame work of size suitable to fixing Gypsum board using 'T' and angle sections made out of 0.5mm thick PGI sheet, grade of zinc coating 220, bent to shape required as in main member, secondary member, perimeter angle section including provn of G I channel suspender fixed to roof members at the rate of 1200mm c/c and interspaced at 610mm c/c, the main fixing channel shall be fixed through fasteners clips as per manufacturer's instructions with and including plaster of Paris decorative type cornice all around at the junction of wall and ceiling inluding applying two coat of oil bound distemper over one coat of appropriate primer and applying 1.5mm thick putty and including taking down and refixing of electrical fittings if any etc., complete all as specified and as directed.

S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixedwith hidden screws to steel/wooden frame work complete all as specified and as directed.

M&L for preparation and cleaning of old mangalore pattern tile/any patern of tile surfaces and appying two coat of anti fungal paint weather coating complete all as specified and directed

Dismantling steel roilling shutter of any discription,thick and any size from the Steel/RCC/and any frame work incluidng iron mongeries from any opening as directed.

supply and fix and in repair Steel rolling shutters, 1.12mm thick(19mm gauge)with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

Supply and fix MS profile sheet 1.12mm thick (19mm gauge)mm thick for rolling shutter including necessary cutting,drilling, and fabrication for replacing damaged profile sheet of existing rolling shutter including taking down old unserviceable damaged profile sheet complete all as specified and as directed

Supply and fix MS profile sheet(Plain or corrugated) 1.12mm thick (19mm gauge) with locking arangement with 200mm to 300mm wide for rolling shutter including necessary cutting,drilling, and fabrication for replacing damaged profile sheet of existing rolling shutter including taking down old unserviceable damaged profile sheet complete all as specified and as directed

Supply and fix Safety lever locks mild steel with 4 levers for rolling shutters all as spcified and as directed.

Material and labour for two coat SE paint on old steel surface incl preperation of the surface complete all as spd and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC (SWR) bends any radious 75mm bore provided with acess door.

K.AYYAPPAN (BID ID -3482793)

ACE PROMOTERS (BID ID -3482138)

VVM CONSTRUCTIONS (BID ID -3482834)

GMS Builders (BID ID -3481572)

m/s prabakaran (BID ID -3476734)