GE(S) BTD 18 OF 2024-25 MISC REPAIR REPLACEMENT DAY TO DAY COMPLAINTS OF BR WORKS OF VARIOUS BLDGS OF ENGR REGT EW BDE EW BN (I) WKSP ARMY AVN AND EW BN UNDER AGE BR I UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Comprehensive maintenance for Carpentary work by attending day to day complaints of joinery related such as replacement of Builders hardware of doors, windows & cupboard and other Carpentary nature works like easening of door, windows and cupboards. Tightening of screws for tower bolt/Aldrop bolt/ stoppers ,handle hinges in respect to Easening of door / windows/cupboards (SteelWooden/Aluminium) of any description and size by cleaning, adjusting in position and making the same functional incl small repairs if reqd with and incl greasing, oiling, screws/nales for fixing the fittings.

Comprehensive maintenance to masonary work by attending day to day complaints of masonary related works such as plastering of wall/ceiling/chajja/making of jambs,soffit,cills etc of size not exceeding 0.25 sqm or on patch work including finishing with distemper/white wash/cement based paint/exterior emulsion paint including two coats of putty as required at site to match with existing surface.

Comprehensive maintenance to plumbing work by attending day to day complaints of plumbing nature like leaking bib taps, stop cock of any pattern or of any type including minor repairs to flush cistern, repair to PE-AL-PE composite pressure pipe/GI pipe leakages, removing air blockages if any and refixing old serviceable bib cocks, stop cocks any pattern after minor repairs such as replacement of washers,jumpers and spindle etc complete all as specified and directed. Minor items like thread , Tefon tape, rubber washer shall be deemed to be included in the quoted rates. (any major parts such as jumpers, brass spindles ,caps etc to be measured as supply only and paid for accordingly)

Note for item No 01 to 03. The scope of work is of day to day maintenance nature/ requirement of works. Contractor shall attend the office of AGE B/R-I on daily basis and receive/ collect the complaints/ requirememts of works and shall rectify the repair/maintenance works within time given below :- (a) Minor plumbing complaints - 48 hours (b) Minor Joinery complaints - 48 hours (c) Minor masonary complaints - 48 hours (d) Major Plumbing - 5 days (e) Major Joinery - 15 Days. If contractor fails to rectify the complaints with materials/ items to be replaced if required a penalty @ 50% of quoted rate by the contractors of that particular item shall be recovered from his payment. The responsibility of getting the complaints attended & rectified shall lies with the contractor even if he fails to complete the complaints within 48 hours. In the delayed case of a rectification of complaints even after 48 hours, he shall rectify the same within one week. (Note :- The complaint received from complaint cell shall have to be attended on same day).

Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. in ground floors and pavings n. exc 15 cm thickness (below or above ground level) all as specified

M & L 75mm thick, cement concrete 1:3:6, type C2 (40mm graded aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) all as specified

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified

M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied

M & L 15 mm thick rendering in CM (1:6) on brick surfaces or conc surfaces on walls and finished even and smooth without using extra cement all as specified

M & L 15 mm thick rendering in CM (1:4) using water proofing compound as per manufacturerer's instruction (WPC to be measured & paid separately) on brick work or concrete surfaces and finished even and smooth without using extra cement all as specified

M & L for rendering 5 mm thick on concrete surfaces such as ceiling or soffits of chhajas etc; in CM 1:3 finished even and smooth without using extra cement all as specified

Supply only integral water proofing compound of approved quality

M&L for applying two coats of weather proof exterior emulsion paint over a coat of exterior primer over newly plastered wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and directed by Engineer-in-Charge

M &L for applying two coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces all as specified

M&L for applying two coats of oil bound destemper ( to match with the adjacent shade or tint) over a coat of chalk whitening on newly plastered wall surfaces including applying wall putty to make up depression etc and to the surface even & smooth including preparation of these surfaces all as specified

M&L applying three coat of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directred by Engineer-in-Charge.

M & L for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including preparation of these surfaces and matching the colour/tint with existing surfaces all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Roughning of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, complete all as specified.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 including taking down old plastered/terrazzo finishes/old tiles etc; complete, all as specified

M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified.

M & L glazed ceramic coloured tiles 7mm thick 350mmx 250mm/450mmx300 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc complete all as specified including 10mm thick plaster in CM 1:4 including dismantling of old tiles of any description etc complete all as specified and directed.

M&L in repairs marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified (Note : Rates deemed to include for provision hole through marble & RCC slab for LPG gas pipe and rounding and polishing of edges of marble slab)

S&F in repairs Stainless steel galvanised wire cloth 0.36mm nominal dia of wire and 1.40 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified

S&F for galvanised Stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples.

S & F in repairs 300mm mild steel ordinary rat tail rod springs, including roller & roller plate and welding to steel frame complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified

S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane all as specified

S&F in repairs tank nipple suitable for HDPE water tank (minimum weight 20 mm - 45 gms) complete all as specified and directed .

M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all aspecified

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm all as specified

Taking up or down 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal all as specified

Taking up or down 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal all as specified

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified

S & F in repairs 15mm bore brass bib taps , screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified

S & F in repairs PVC lid (cover) for 500 to 1000 ltr capacity PVC water tanks with hinging & lockng arrangement complete all as specified

S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified

S & F in repairs, brass chromium plated shower rose 125mm dia, with swivel joints & and arms, and fixing to pipe & union all as specified

S & F in repairs 15mm bore, fancy type , chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle,screwed both ends for iron pipe all as specified

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified

S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.

Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.

S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs plastic water closet seat , black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S & F in repair 300mm mild steel ordinary rat tail rod springs, including roller & roller plate complete all as specified

S & F in repairs 15mm bore, brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe all as specified

S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified

S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges all as specified

S & F in repairs 15mm bore fancy type chromium plated brass bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified (make - prayag, Kingstone,SEIKO ) all as specified

S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified (make - prayag, Kingstone,SEIKO ) complete all as specified

S&F in repairs for three layer Rotational moulded polythlene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with dismantling of tank all as specified in SSR Part I complete all as specified

S&F in repairs for three layer Rotational moulded polythlene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with dismantling of tank all as specified in SSR Part I complete all as specified

S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified

S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified

S & F in repairs 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps etc all as specified

S & F 110 mm bore, PVC (SWR) fittings such as bends of any radious, tee, shoe etc; fixed to PVC pipes, complete all as specified

Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour, high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed Make : Prayag/Polytuff all as specified and as directed

Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.

S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.

Fixing only in repair vitreous china wash basin, of any description & size, excluding taps, wastes but including brackets complete all as specified

S&F in repair flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories, all as directed.

S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as specified.

Fixing only cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as specified.

Sealing only joints of cast iron pipes and fittings 75/100mm dia with chemical cement and making the joints leak proof complete all as specfied

S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified

S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified

S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors all as directed

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories, all as directed.

S & F cast iron soil waste and vent pipe 75 mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as specified.

Fixing only cast iron soil waste and vent pipe 75 mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, all as specified.

S&F in repairs oval access doors to cast iron pipes of 75 mm bore with rubber washer & bolts & nuts as required complete all as specified

S & F in repairs CI bends any radius, 75 mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified

Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required and shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified

Supply only floor trap 75/100 mm dia with grating including jointing to waste pipe

S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified

M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed by Engineer - in – Charge.

M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified

S & F in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section all as specified

Supply and fixing in repair 150 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.

S & F 200 mm aluminium anodised, barrel tower bolts of extruded section all as specified

Supply and fixing 150 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.

S&F for MS tower bolt 200 mm long stove enamelled black with bright bolt.

S&F for MS sliding door bolt 250 mm long stove enamelled black with bright bolt etc.

S&F for MS pressed handles, oval type stove enamelled black 150 mm long.

S&F in repair MS tower bolt 200 mm long stove enamelled black with bright bolt.

S&F in repair MS pressed handles, oval type stove enamelled black 150 mm long.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames).

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames).

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each.

S&F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.complete all as specified

S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.complete all as specified

M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified

S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) all as specified

S & F 2nd class hardwood, factory made shutters, 35 mm thick plain framed panelled shutters (any number of panels) with with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both side. The size of rail & stiles as per IS :1003 (Part I), kiln seasoned and chemically preassure treated, complete all as specified

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per specifications & drawing

S & F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings

M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Securing window/vent glass of any description in existing metal/wood frame fixed with putty/ beads including removing loose or decayed putty/beads, and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

S&F in repairs ( to be fixed with screws & welding as required) continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm all as specified

Dismantling boarding any description fixed in any position with rails incl fillets

S&F in repairs 18/19mm thick pre-laminated particle board, interior grade, fixed with screws to timber frame work and steel frame work as in kitchen cupboards, drawers, shutters, shelves etc including teak wood lipping, 6mm thick on edges fixed with nails etc, complete all as specified

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified

Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified

S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, including steel window/ventilators complete all as specified and directed.

S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars, , including steel window/ventilators complete all as specified and directed.

Supply and fixing steel windows or ventilators fixed/openable type with glazing bars , including steel window/ventilators complete all as specified and as directed .

S&F for Al hasp and staple 100 mm size.

Supply and fixing mild steel framed work such as grills,guard bars, gate, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

M & L chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and any pigment and 20 mm thick screed bed in cement mortar 1:6 as n floor etc complete all as specifid and directed

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade and incl 25mm thick sand bed /cushioning,complete all as specified and as directed

M&L 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer all as specifed.

M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl demolition of stone slab and tiles of any description or thickness and laid bedded on any mortar in floor, apron etc complete all as specified and directed

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl demolition of stone slab and tiles of any description or thickness and laid bedded on any mortar in floor, apron etc complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations incl rubbing and polishing ( Granite finish) etc complete all as sspecified and directed

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates with powder coating (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified

S & f powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Repair to aluminium door shutter ,window,sliding window ,ventilator partition by replacing joining cleat glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed Note:- Sheet glass, particle board will be measured and paid separately if provided at site.

M & L prelaminated partical board 12mm thich interior grade, prelaminated one side with decorative choice lamination fixed with screw to timber/aluminiumframe with snap grid complete all as specified and as directed

S&F in repairs 5.5mm thick sheet glass ordinary quality and fitting with PVC rubber beading for door and windows in squares exc 0.50 sqm in each pane complete all as specified.

S&F in repairs brass 4 lever mortice lock, vertical type size 100 mm comlete all as specified and as directed.

Dismantling GI framing for ceiling etc complete all as specified and directed by Engineer-in-charge.

Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed by Engineer – in – Charge .

S & F anodized aluminium snap grid frame work for false ceiling grid 605mm x 605mm etc complete all as specified and directed by Engineer - in - Charge.

S & F in repair 4mm thick eco board thick as in ceiling fixed with screw as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame / plastered surfaces with necessary nails as per specifications and drawing lining board complete all as specified

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

KULWANT RAI

M/s Kamal Constructions

M/S KARTIK BUILDERS

M/s Kamal Builders

ABHINANDAN ENTERPRISES

Easyways Enterprises

M/s Manav Builders