Additional Urgent Nature of Civil work at Prayagraj Airport.

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. Old work (One or more coats)

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing tractor with attached harrow/disc harrow/excavator or hydraulic trolley of approx. size 125 to 150 cubic feet including driver and fuel for the purpose of transportation of stone boulders, roots of bushes and trees and likewise un-useful material from the various locations of all areas of Airport and dumping the same in the isolated safe location identified by Engineer-in-Charge within or outside of Airport premises all lifts and lead.

Providing and operating the J.C.B. for leveling, cutting etc., at the operational / non operational area including transportation to and from the site of operation fuel charges, driver charges and any other incidential expenses on this account all etc. as directed by the Engineer-in-charge. (The payment will be based on the number of hours worked at the site.)

Supplying labour for day to day maintenance jobs includuing required T & P complete as per direction of EIC. ( Prevailing Minimum wages= (A) + CP on (A) @ 7.5%= (B) +Labour cess on (A+B) @ 1% = (C) Skilled Labour Note:- Contractor is bound to pay minimum wage or more to labour.

Supplying labour for day to day maintenance jobs includuing required T & P complete as per direction of EIC. ( Prevailing Minimum wages= (A) + CP on (A) @ 7.5%= (B) +Labour cess on (A+B) @ 1% = (C) Unskilled Labour Note:- Contractor is bound to pay minimum wage or more to labour.

Providing and fixing acrylic sheet of white or any other colour as per requirement and satisfaction of E.I.C. a) 4mm thick

Providing and fixing acrylic sheet of white or any other colour as per requirement and satisfaction of E.I.C. b) 2 mm thick

Providing and pasting vinyl digital print signages at all locations including all T&P, labour etc for cleaning the surface, pasting signages all complete as per direction of EIC. On 3mm Sunboard Base

Providing and pasting vinyl digital print signages at all locations including all T&P, labour etc for cleaning the surface, pasting signages all complete as per direction of EIC. On 3mmAcrylic Base

Providing and pasting vinyl digital print signages at all locations including all T&P, labour etc for cleaning the surface, pasting signages all complete as per direction of EIC. On 3mm ACP base

Providing,supplying and fixing High Intensity Retroreflective sheet of approved make on 3mm ACP Sheet. (Cost of ACP Sheet shall be paid extra) as per direction and satisfaction of Engineer-in-Charge. Printing matter

Providing,supplying and fixing High Intensity Retroreflective sheet of approved make on 3mm ACP Sheet. (Cost of ACP Sheet shall be paid extra) as per direction and satisfaction of Engineer-in-Charge. Cutting matter

Fabricating and Providing required furniture like table almirah shutters, Stool or any other such items using plywood fevicol, nails, tape i/c all kind of manpower as per drawing & design given by the EIC or his representative using individual or comibantion of ply wood as follows:- 12 mm ply wood

Fabricating and Providing required furniture like table almirah shutters, Stool or any other such items using plywood fevicol, nails, tape i/c all kind of manpower as per drawing & design given by the EIC or his representative using individual or comibantion of ply wood as follows:- 18 mm ply wood

Providing and fixing beveled mirror edge 8 mm thick of approved make in required shape and size without plastic moulded frame, i/c fixing with studs and making necessary holes, as per direction and satisfaction of E.I.C.

P/F (Aluminium Composite Panel) Sheet any colour on existing frame as per requirement all complete in all respect as per direction and satisfaction of Engineer-in-Charge. 4mm thick ACP (FR grade) of Aludecor ALAS color AD09

P/F (Aluminium Composite Panel) Sheet any colour on existing frame as per requirement all complete in all respect as per direction and satisfaction of Engineer-in-Charge. 3mm thick ACP

Providing and fixing Urinal Sensor compatible for Urinal cera make 320X300X525 mm (S4010102) or equivalent complete as per direction and satisfaction of engineer-in-charge.

Cleaning of existing expansion joints and providing & filling with polysulphide joint sealing compound (confirming to grade BS:5212, Part-I, 1990) of Dr. Fixit or equivalent including painting the sides of slab with approved primer and filling the groove 20mm width x 25mm deep including inserting the backer rod of Supreme or equivalent of appropriate dia of approved make to receive the specified sealing compound, providing and applying bond breaking tape on top edges of joint to prevent accidental spillage of sealant on top surface and to give a neat finish to the sealant has been applied and tooled, all complete as per specification and direction of Engineer-in-Charge

Cleaning of existing Dummy/Contraction joints and providing & filling with polysulphide joint sealing compound (confirming to grade BS:5212, Part-I, 1990) of Dr. Fixit or equivalent including painting the sides of slab with approved primer and filling the groove 10mm width x 15mm deep including inserting the backer rod of Supreme or equivalent of appropriate dia of approved make to receive the specified sealing compound, providing and applying bond breaking tape on top edges of joint to prevent accidental spillage of sealant on top surface and to give a neat finish to the sealant has been applied and tooled, all complete as per specification and direction of Engineer-in-Charge

Supplying of packed Elastomeric concrete compound (Flex - O - Patch of Choksey chemicals/ Delpatch of D.S Brown or equivalent) at site. The one pack of 10 kg Elastomeric concrete shall consist of 3 kg hardner 1.5 Kg base & 5.5 Kg of sand & fibre powder.

Repairing of damaged portion of rigid pavement with Elastomeric concrete compound(Flex - O - Patch of Choksey chemicals/ Delpatch of D.S Brown or equivalent) after marking, cutting, chipping the pavement up to required size by using mechanical chippers, side locking on the vertical face, cleaning the prepared area by sand blasting with medium grit sand, masking and pouring the compound, finishing & texturing complete, including applying primer as per manufacturer specifications and the direction of Engineer-In-chage with required machines & tools. Note: The rate quoted shall be exclusive of cost of material.

Edge repair of Dummy/Construction/Expansion joints of different sizes varying from 5mm to 25mm by epoxy of Doctor Fixit grout as per the satisfaction of Engineer-In-Charge.

Repair of cracks in concrete by preparing the necessary V-joint, priming the surface, filling with necessary grouting compound of Dr. Fixit or equivalent as per the satisfaction of Engineer-In-Charge. Joints of 10mm wide.

Repair of cracks in concrete by preparing the necessary V-joint, priming the surface, filling with necessary grouting compound of Dr. Fixit or equivalent as per the satisfaction of Engineer-In-Charge.Joint of 25mm wide.

Supplying of Fiberglass rectangular Planter of size 2 feet to site as per per dirction of Engineer-in-Charge

Supplying of fiberglass Planter of size 16 inch square to site as per per dirction of Engineer-in-Charge

MMS Builders (BID ID -808453)

AYODHYA CONSTRUCTION (BID ID -808315)

AJAY ENTERPRISES (BID ID -808979)

Maa Sharda Enterprises (BID ID -808309)

SUPURAN CONSTRUCTION PVT. LTD. (BID ID -808216)