Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.4 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹9.8 L+₹21,640 (2.26%)Rejected-Finance 11A LAXMI VIHAR BANDHAN PALACE WALI GALI MODIPURAM MEERUT UTTAR PRADESH 250110 | MEERUT | UTTAR PRADESH | 250110 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹9.8 L+₹26,365 (2.75%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹10.0 L+₹39,940 (4.17%)Rejected-Finance SHIV BHAWAN GROUND FLOOR MAGADH COLONY ROAD NO 3 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹10.4 L+₹82,440 (8.61%)Rejected-Finance SHIV BHAWAN MAGADH COLONY ROAD NO 03 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹23,900
Closing Date
13 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
Spl repair to Bldg No T-09 single offr accn old camp at Mil Stn Gaya.
2023_MES_589624_1
8011/GE/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GAYA
₹23,900
Yes
15 Jul 2023
15 Apr 2023
15 May 2023
15 Apr 2023
13 May 2023
29 Apr 2023
Amount
Surface excavation not exc 30CM deep and averaging 15CM deep and getting out in soils
M&L 75mm thick cement concrete type B2, PCC 1:3:6 (40mm graded agg) as in path/hardstanding as directed by Engr -in -charge
Sand filling under floors are in foundation including watering and consolidation
M & L for 18 mm thick Pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber framework with teak wood beading as in linings, panelling wsimilar location complete all as specified and directed.
S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.
S&F magnets to be used in cabinets as specified and directed by engineer in charge
S & F of stainless steel fancy type handle 150 mm long complete.
Supply & Fixing heavy duty telescopic sliding channel suitable for 18/19 mm thick prelaminated paarticle board/ply board fixed at site as per directed.
Providing and fixing of stainless steel kitchen cabinet trolly, handle etc. made out from high tensile stainless steel wire of 304 grade duly weld in shape & size as directed.
M&L PCC 1:2:4 Type B1 (20mm graded agg) as in copings,kerbs and like incl weathering slightly rounded or chamfered angles and throating as directed
M&L rubber Moulded pre-cast concrete interlocking paver block any shape and colouring and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigments all as specified and directed
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point
M&L For rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25 mm thick, any colour set, jointed and pointed in neat cement slurry over & including 15 mm screed bed in CM 1:6 and all as specified and directed by engr -in -charge.
Demolition of stone /brick masonary in CM or cement / lime mortar including all quins ,arches pillers etc.
M&L Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 all as specified and directed by Engr -in -charge
M&L for 1 mm thick of Birla white putty/JK white wall care putty on new plastered surfaces and making the surface uniform & smooth.
M&L for rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge.
M&L for two coat of cement base paint as per manufacturer instruction on existing New/old treated surfaces of walls after preparation of surfaces all as specified.
M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of New/old plastered wall surfaces.
Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises.
M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM 1:4 complete.
M & L for 15- 18 mm Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
M & L RCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves and the like complete.
M&L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and incl ms wire not less than 0.9mm dia.
M&L for Providing precast cement concrete louvres and jallies 35 mm thick Type B0 1:2;4(12.5 graded agg)Set in cement mortar 1:6 all as specified and directed by Engr-in-charge.
M & L coloured Non Skid ceramic coloured tiles (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M & L for 15mm thick screed bed or bedding layer with CM 1:4 complete
S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.
S & F of powder coated aluminium alloy handles, fabricated type, anodised 100 mm long
S & F of powder coated Aluminium anodised, barrel tower bolts of powder coated and fixed 100 mm long
S&F as in repair alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 200 mm long complete all as specified.
S& F 100mm butt hinges, extruded aluminium with galvanised MS hinge pin anodised type C - 21
S&F in repair 300 mm MS ordinary rat tail rod pattern springs, including roller plate.
Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).
Taking down chowkhats for frames exc 1.5 Sqm but not exc 4.00 Sqm.
S & F of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)
Dismanteling ceiling and wall boards of any type or any thickness inclluding cover fillets compleate all as specified and directed
M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed.
S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge.
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engg- in- charge.
S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.
M & L for 32 mm thick Flush shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc.
M & L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
M & L for pressed steel door frame size 165 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.
M&L for apply one coat of synthetic enamel paint on old painted surfaces of wood and wood based of any description, over 10cm in width or girth complete all as specified and directed.
M & L for vitrified ceramic tiles double charge light shed of 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete.
S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe and coupling complete all as specified and directed.
SINGHAL ENTERPRISES
M/S MAGADH CONSULTANT
M/S NIRBHAY KUMAR SINGH
M/S ABHAY KUMAR AND BROTHERS
UMESH SINGH
M/S CHAUHAN CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .