Special repair to 700 meter perimeter fencing at Mil Stn Beas under GE Kapurthala

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete or brick masonary and making good disturbed ground all as specified and directed by Engineer-in-charge.

All as per item No 1 but embeded on natural ground complete all as specified and directed

Dismantling Galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with galvanized mild steel wire, staples or steel pins, etc. complete all as specified and directed (each line wire to be measured).

Excavation in post holes (similar holes) in soft/hard dense soil (or similar holes) each n exc 0.5 cu.m, getting out in hard dense soil, returnig, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm , watering, and removing surplus soil to a distance n. exc. 50 m and making good surface complete all as specified and directed.

S&F mild steel work (Miscellaneous) for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or reveting, etc. and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

M & L for Plain Cement Concrete Type C2, 1:3:6 (using 20 mm graded stone aggregates) as in foundations, filling & mass concrete etc complete all as specified and directed.

S&F for chain link fencing made out of plain mild steel galvinised wire, width of aperature 50mmx50mmx4mm dia to new steel posts by means of nuts and bolts, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire stapples or steel pins complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel screw bolts (machine made) with hexagonal or Square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but n.exc 10cm long, dia of shank 5 to 10mm complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by engr-in-charge.

M&L for mild steel round bars 10 mm dia and over for strengthing of chain link fencing, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annelead) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

Providing and fixing concertina coil in fencing with punched tape concertina coil 600 mm dia 10 meter openeable length (Total 90m) having 50 nos round per 6 meter length, with existing angle iron 'Y' shaped placed 2.4 mter or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Engineer-in-Charge with reinforced barbed tape (R.B.T)/spring core (2.5 mm th) wire of high tensile strength of 165 kg/sq mm with tape (0.52 mm th) and weight 43.478 gm/meter (cost of angle CC block shall be paid separately).