REPAIR TO SECURITY WALL, GATE, FENCING, PLASTERING, PERIODICAL SERVICES AND MISC B/R WORK AT SAMNABANJ, RC PEAK, BATTAL NODE UNDER GE (ARMY) DHAR ROAD

Amount

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc,complete all as specified and directed .

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.

-ditto- all as per above here in but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed. (WPC will be measured and paid separately).

Supply only liquid WPC

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. .

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance and all as directed.

M&L for two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl preparation of new plasterd surface by spray gun machine complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge.

M & L for preparation of old surfaces by removal of existing treatment and apply two coats of cement based paint over a coat alkali primer resistance etc complete all as specified and directed .

M&L for applying two coat of Acrylic smooth exterior emulsion paint on walls, pillars cornices etc surfaces by spray gun machine incl complete removal of existing sureface & filling necessary putty wherever required as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer etc complete all as directed.

M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer etc complete all as directed.

M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of oil emulsion distemper over a coat of primer on surface of walls through electrical operated grinder etc, complete all as spcified and directed.

M&L for applying 3mm thick wall care putty in two coats on plastered surfaces of wall and smoothening the surfaces with sand paper/mechanised sanding etc preparatory to paint, complete all as specified and as directed.

M&L for preparation of old surfaces by rubbing , washing etc and applying two coats of oil emulsion distemper on ceiling over one coat of primer etc complete all as spcified and directed .

M & L for one coat of white washing on old surface of wall including preparation of old surfaces by washing and rubbing down etc complete all as specified and directed.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc complete all as specified and directed.

-ditto- all as per item No 22 above but here- in area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed.

M& L for Glazed ceramic jointless light/coloured group of size exc 0.13sqm but n.exc 0.18 sqm area of each tiles and thickness of wall tile not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, incl dismantling tiles etc complete all as spd and directted.

M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling tiles etc complete all as spd and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and directed.

M&L for 20 to 25 mm thick Kota stone slab (Machine cut) of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring /steps/ riser / skirting incl dismantling stone slabs etc complete all as spd and directed.

M&L for marble 15-17 mm (green/any colour shade approved by EIC) thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade to flooring / staircase / steps,riser incl rubbing and polishing incl rounding to edge of marble and incl dismantling complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4 type B0 as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4, incl dismantling complete all as specified and as directed.

M & L for 100mm thick PCC 1:2:4 type B-2 (using 40 mm agg. ) in hardstanding /base of flooring incl demolition complete all as spd and directed.

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of 60mm thickness any shape and size confirming to IS 15658 -2006, with grey cement, pigment incl dismantling complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L for PCC type B-0,1:2:4 (12.5mm graded aggregate) as in kerbs or mud stops rounded or chamfered on edge, cills , copings etc complete all as specified and directed..

M & L for PCC 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as Spd & directed .

S&F for silver mirror finish 1mm thick SS acrylic 3D letter of 304 grade steel and having LED light strip behind the letters. The height, width and depth of each letter shall be 600mm, 450mm and 30mm respectively. Note : (i) This item include for all the fixing materials required to fix the letters on the wall.(ii) Quoted rates include taping to the nearest light point of required length and including the wire of required core as directed by EIC. (iii) The pattern /shade and the design of LED light strip will be as decided by the Eng-in- Charge.

S&F for 3mm thick ACP(Aluminium Composite pannel) sheet with aluminium base frame (size of aluminium Rectangular hollow Section-40x20mm thick) of best quality as any colour as approved by EIC /GE complete all as spd and directed.Make :Alstrong/ Viva/Alex panel

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, incl securing or tying at crossing with and provn of galvanised mild steel wire, staples or steel pins, complete all as specified and directed.

S&F in repair circular concertina coil punched tape (incl spikes and handle) with 50 turns and loop dia 750mm, width of barbed 9mm dia and spacing clips 23.5mm to 24.5mm c/c and weight of coil not less than 10 to 14 kg without packing, coil length will be 6meter when opened up etc, fixing at any position/at any height, binding with angle iron ground pickets and binding of coils with clips and binding wire as per manufactures's instruction & sample as approved by GE /EIC complete all as specified and directed.

Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as directed and specified.

S& F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specifed and directed.

M&L for framed work such as grills, gratings,framed guard bars, walk ways, railings; framework of water tanks, rafters & purlins, fencing post etc work conforming to Fe.290.Gde-E-16, complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed and specified.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F in repair fibre glass reinforced translucent sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc incl dismantling complete all as specifeid and directed.

S&F for chain link MS galvanised fencing 4.0mm dia and size wire box size 50x50mm 75/75mm including line wires any mess, size and type to any type of standard, rails, straining bolts, etc including provision of binding wire, incl dismantling complete all as specified and directed.

M& L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe 410-W (Gde-E-250) quality A) at any position complete all as specified and directed.

M & L for cement concrete (1:3:6) type C1 (20mm graded stone Agg.) as in mass concrete / coping/ drain channel / embedding of angle iron post etc complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed and specified.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring incl demolition complete all as spd and directed.

M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area incl demolition complete all as spd and directed.

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specied and directed

M&L for anodised aluminium powder coated door shutter , aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality / frosted glass or ACP sheet incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts,1xdoor stoper,1xHydralic door closer with each shutter any type incl taking down complete all as specified all as specified.

M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighing not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as spd and directed.

M&L for aluminium Anodized powder coated fixed frame of partiton or fixed window / ventilator , aluminium section weighing not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specifed & directed

M&L for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified.

M&L for providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottom tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners & dismantling of walls and ceiling board any type complete all as spd and directed.

-ditto- all as per above item 58 but here-in fixing only complete all as specified.

M&L for box type window 1.25mm thick made of ERW tube P-Section of size 60x25 mm double rebated outer frame comprises of glazed skeclton shutter (two gauged shutter and two glazed shutter) of ERW tube P-Section size 50x20mm and 1mm thick one/two nos openable leaf consisting of two Nos sash bar of T- Section 20x3mm welded to frame with one No verticale mullion of ERW box type T-section of size 60x25 mm and 1.25 mm thick and FI 2mm thick welded/ screwd to frame for fixing of glass including fitting and fixture like Handle tower bolt stopper cleat pintal hinges, hold fast etc, (i) Hold Fast, 150mm long of 120mm x 3mm made to shape-04 nos per window (ii) Handle of Z sec 20mm x25mm, 100mm long -1 No per leaf (iii ) MS tower bolt pintal hinges of size 75mm x12mm-2 Nos per leaf, (iv) Z sec 20mm x 25mm, 100mm long stopper-1 No per leaf (v) Claet 5mm long of hollow square 15mmx 20mmx0.63mm welded to hinges-1 No per leaf (vi) MS pintal hinges of size 75mmx12 -2 nos per leaf (vii) 8mm square guard bar, 10 cm centre to centre, (viii) 40x66mm flat iron all around for joint of both frame, (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty (x) Two coat of synthetic enamel paint to MS window and guard bar, incl taking down old steel/ wooden window and making good dismantled portion with oil putty (x) Two coat of synthtic enamel paint to MS window and guard bar, incl taking old steel / wooden and making good dismantled portion with PCC type B0 incl hold fast PCC (four Nos for Each window) & around require plaster in CM 1:4 and match with exsiting finishing complete all as spd and directed.

Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, partly fixed and partly glazed amd partly gauged shutter consisting with 2 Nos pintos hinges 100mm long 2 Nos stove enamelled tower bolt 150 mm long and 1 Nos steel handle dovetailed or welded with each shutter complete with necessary cleat and stopper, 40x6 mm flat iron all around for both frame with the following incl:- (i) Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless / wooden window and m,aking good dismantled portion with PCC 1:2:$ type B0 incl hold fast PCC (Four Nos for each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed.

M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, incl taking down old frame/chowkat complete all as spd and directed.

-ditto- all as per above item but here in size of frame 125mmx60mm for door complete all as specified.

S&F for 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, and both faces is covered with decorative face veneer with lipping/frame to match as approved by EIC & incl taking down old shutter complete all as specified and directed.

S&F for 2nd class H.W. glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads & taking down old shutter etc complete all as specified.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter & 3Nos- 100mm Aluminium hinges for each shutter complete all as specified and directed .

S & F for mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bar and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.

S & F in repair 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane incl hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and glazed with oil putty complete all as specified and directed.

S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.

S&F for aluminum handles cast type anodized 150mm long (ISI Marked) complete all as specified and directed.

S&F for 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair, 150 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd. complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.

M&L for 18mm thick water proof solid MDF Board prelaminated both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and as directed.

M&L for extruded brass handle, fancy type as approved by the GE, polished, 150mm long (ISI marked), complete all as specified.

M&L for continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified.

M&L for magnetic catcher suitable for any shutters, complete all as specified.

S&F 100mm long hasp and staple aluminium anodised including bolt to hinge plate and fixed with screw.

M&L for various china squating pan of (Orissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cistern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed

S&F for vitreous China, wash down water closet pan (pedestal pattern) with trap, white ( excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing piupe in repair complete all as pecified and directed.

S&F of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern in repairs complete all as specified and directed.

S&F for Vitreous China wash basin (Pedestal pattern), White, flat back, size 550x400 mm incl brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs complete all as specified

S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.Make: J

S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified.

S & F for Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe in repairs complete with all fittings all as specified and directed. Make: Jaquar or equivalent .

S & F in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed. Make: Jaquar or equivalent .

S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S& F for swan neck pillar cock fancy type chromium plated screw with iron pipe incl all fittings in repairs complete all as specified and directed.

S&F for PVC connections 60cm long superior quality with PTMT nut on both sidecomplete all as specified and directed.

S&F in repair grating round 125mm size of CP complete all as specified and directed.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 500 ltr capacity, hoisted and fixed in any position incl 20 mm dia ball float valve with aluminium fitting, GI nipple and any fitting ,dismantling existing water tank complete all as specified and directed.

-ditto- all as per above item but here-in-before refixing in same/ other position complete all as specified.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed in any position incl 20 mm dia ball float valve with aluminium fitting,GI nipple and any fitting , tank cover dismantling existing water tank complete all as specified and directed.

-ditto- all as per above item but here-in-before refixing in same/ other position complete all as specified.

S&F in repairs Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

Taking up or down 15 mm dia bore steel tubing and connection complete all as specified and directed.

S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required, incl 10cm exc but not exc 20cm in girth all as directed and specified.

S&F GI tubing 15 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in repair steel tubing and connection 15 mm dia bore to wall and laid in floors complete all as specified and directed.

Taking up or down 20 mm dia bore steel tubing and connection complete all as specified and directed..

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors complete all as specified and directed.

S&F for Gun-metal globe or gate valves of 20mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .

S&F for Gun-metal globe or gate valves of 15mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .

S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and MS ring (25x6 FI used) bolt at every 1.5 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .

S&F for 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade" with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.

'Ditto all as per ser item No 116 above but laid in trench or in floor

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .

S&F PVC (SWR) vent cowl of 110mm bore

S&F PVC (SWR) vent cowl of 75 mm bore

Demollition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for cleaning of blocked sewage lines, 100mm to 200mm dia in horizontal or verticlal position from manhole to manhole drain pipe Note:- Cleaning of sewge lines 100mm to 200mm di upto any length by removing all silts, foreign material and other deposits whatever completel and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operatioon will be carried out in suitable length by blocking the first and last manhole of sewer line and removing the silt/ sludge & deposite out side of defence land in covered van/trolly all as specified and diectected.

Cleaning of sludge, mud etc from manhole of any size and depth including, gatting out and removing & depositing the sludge outside defence land and covering the manhole properly after completing the clening all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Taking down shutters of any description not exceeding 1 Square metre each complete.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete.

PARAS RAM ASGOTRA AND SONS

M/S PAWAN KUMAR ANAND

TARUN BUILDERS

devraj chalotra

MADAN LAL SHARMA AND SONS