KMC/EE(E)/LTG/CMO/84/25-26

TOTAL

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m (3rd Corrigenda & addenda dated 04.06.2018)

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF SUCTION/ DISCHARGE COPPER PIPE LINE IN SPLIT AIR CONDITIONING UNIT 1.0/1.5 TR/2 TR/3 TR CAPACITY INCLUDING BRAZING, NITRILE RUBBER INSULATION 6/9MM THICK CLASS 'O', ETC COMPLETE AS REQUIRED.COPPER TUBE 1/4" [I&W WAYS SCHEDULE 2022, P-117, I-5.3 H.4.1]

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF SUCTION/ DISCHARGE COPPER PIPE LINE IN SPLIT AIR CONDITIONING UNIT 1.0/1.5 TR/2 TR/3 TR CAPACITY INCLUDING BRAZING, NITRILE RUBBER INSULATION 6/9MM THICK CLASS 'O', ETC COMPLETE AS REQUIRED.COPPER TUBE 3/8" [I&W WAYS SCHEDULE 2022, P-117, I-5.3 H.4.2]

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF SUCTION/ DISCHARGE COPPER PIPE LINE IN SPLIT AIR CONDITIONING UNIT 1.0/1.5 TR/2 TR/3 TR CAPACITY INCLUDING BRAZING, NITRILE RUBBER INSULATION 6/9MM THICK CLASS 'O', ETC COMPLETE AS REQUIRED.COPPER TUBE 1/2" [I&W WAYS SCHEDULE 2022, P-117, I-5.3 H.4.3]

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF SUCTION/ DISCHARGE COPPER PIPE LINE IN SPLIT AIR CONDITIONING UNIT 1.0/1.5 TR/2 TR/3 TR CAPACITY INCLUDING BRAZING, NITRILE RUBBER INSULATION 6/9MM THICK CLASS 'O', ETC COMPLETE AS REQUIRED.COPPER TUBE 5/8" [I&W WAYS SCHEDULE 2022, P-117, I-5.3 H.4.4]

GAS CHARGING (R410A/ECO FRIENDLY GREEN GAS) OF 1.5 TR SPLIT AIR CONDITIONING UNIT INCLUDING FLUSHING OF COOLING & CONDENSING UNITS WITH NITROGEN GAS & RECTIFICATION OF LEAKAGE, REPLACEMENT OF FILTER, FLAIR NUT ETC. IF ANY. [I&W WAYS SCHEDULE 2022, P-117, I-5.3 H.5.2]

GAS CHARGING (R410A/ECO FRIENDLY GREEN GAS) OF 2.0 TR SPLIT AIR CONDITIONING UNIT INCLUDING FLUSHING OF COOLING & CONDENSING UNITS WITH NITROGEN GAS & RECTIFICATION OF LEAKAGE, REPLACEMENT OF FILTER, FLAIR NUT ETC. IF ANY. [I&W WAYS SCHEDULE 2022, P-117, I-5.3 H.5.3]

ERECTION AND INSTALLATION OF BOTH COOLING AND CONDENSING UNIT FOR 1.5 TON SAC AT RESPECTIVE LOCATION ON WALL ALONG WITH TERMINATION OF REFRIGERANT LINE AS PER DIRECTION OF EIC MENDING GOOD DAMAGE TO ORIGINAL FINISH.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 3 x 56/0.3 (4 sqmm) + 2 x 36/0.3 (2.5 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 4 x 56/0.3 (4 sqmm) + 2 x 36/0.3 (2.5 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire brand(approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc. (Payment to be made on area of cut surface)

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (a) Tack weld

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (b) Continuous weld.

BUILDING WORKS (K) PAINTING, VERNISHING ETC?(A) ORIGINAL WORKS.(5)Painting with ready mixed Black Japan of approved make and brand including smoothening surface (b) Two coats.

BUILDING WORKS ( C ) Brickworks,Concrete Works etc.39...Extra for high scaffolding in water tank for repairing, painting etc.NOTE : Height of the bottom of the tank not less than 15 mtrs.

Please Enable Macros to View BoQ information