Construction of community toilet block with water facilities

Amount

Earth work in exzcavation by mechanical means (Hydraulic excavator/Manual means in foun dation trenches or drain (not exceeding 1.5m in width or 10 sqm on plain) including dressing of sides and remaining of bottoms, lifts upto 1.5m including getting soil as directed within a lead of 50m

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming abd watering, lead up to 50m and lift upto 1.5m

Random Rubbles Mansonry with Hard stone in Foundation an dplinth including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) at plinth level with: Cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying in position cement of specific grade excluding the cost of centering and shuttering 1.3.6 (1 cement:3 coarse sand: 6 stone aggregates 40mm)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (All work upto plinth level)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. (Columns)

reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15˚, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases upto floor five excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete

Centering and shuttering including strutting, propping etc. and removal of form in for: foundation, footings, bases of columns for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form in for: lintels, beams, plinth beams, girdes, bressumers & cantilevers

Centering and shuttering including strutting, propping etc. and removal of form in for: suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form in for: columns, pillars, piers, abutments, posts & struts

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement: 4 fine sand)

Brick work with common burnt clay F.P.S (non modular) bricks of class dasignation 7.5 in super structure above plinth level upto floor-V level in all shapes and sizes in: cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extrudued built up standard tubular section/ appropiate Z section and other section of approved make conforming to IS: 733 and IS: 1285, fixed withrawl plug and screws or with fixing clips, or with expansion hold fasterners including filling up of gaps at junction, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/stainless steel screws, all complete as per architectural drawing. (Glazing and panelling to be paid seperately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings (cost of alumimium snap beading shall be paid in basic item)

Providing and fixing aluminium casement window fastener of required for aluminium window with necessary screws etc complete (Powder coated minimum thickness 50 microns aluminium)

Filling the gap in between aluminum/stone/wood/frame & adjacent RCC/Brick/stone/wood/ceramic/gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete, complying to ASTM-C 920, DIN 1854-F and ISO-11600 (upto 10mm depth and 10mm width)

Providing and fixing stainless steel (SS-304) grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to trhe side hung windows as per direction of Engineer-in-Charge complete

Designing, fabrication, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels including:(structural glazing)

Providing and fixing aluminium tubular handle bar 30mm outer dia 3.0mm thick & 2100mm long with SS screws etc. complete as per direction of Engineer-in-Charge, Powder coated minimum thickness 50microns aluminium tubular handle bar

Providing and fixinh M.S Fan Clamp type-1 or 11 of 16mm dia M.S bar, bent to shape with hooked ends in R.C.C slabs or beams during laying including painting the exposed portion of loop, all as per standerd design complete

Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc, including cutting, hoisting, fixing inn position and applying a priming coat of approved steel primer, including weilding and bolted with special shaped washers etc. complete

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes and pluggingwith cement mortar 1:2 (1 cement: 2 coarse sand( to match the existing floor with Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer with water absorbtion less than 0.08% and conforming to IS: 15622, of approved make, in all colours, shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), joining with grey cement slurry @3.3Kg/Sqm including grouting the joints with white cement and matching pigments. complete size of tiles 600x600mm

Providing and laying rectified Glazed ceramic floor tiles of size 300x30mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in colours white, ivory, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3Kg/m including grouting the joints with white cement and matching pigments etc complete

Chequered precast cement concrete tiles 22mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubing and cleaning etc. complete on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Medium shade pigment using 50% white cement and 50% ordinary cement

15mm cement plaster on rough side of single or half brick wall finisfed with a flaoting coat of neat cement of mix 1:4 (1 cement : 4 fine sand)

12mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand)

15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand)

15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand)

Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface : watere thinnable cement primer

Distempering with dry distemper of approved brand amd manufactuer (two or more coats) and of required shade on new work, over and including water thinable priming coat of whiting to give an even shade

Finishing walls with Deluxe Multi surface paint system for interior and exterior using Primer as per amnufactures specifications: two or more coats apples on wall @ 1.25 Kg/sqm and including one coat of special primer applied @0.75ltr/ 10 Sqm

Finishing walls with textured exterior paint of required shade New York (two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20Kg/10Sqm

Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Providing and fixing 18mm thick Gang saw cut, mirror polished, premoulded and pre polished, machine cut for kitchen platforms,vanity counters, windows sills, facias and similar locations of required size, approved shade, colour and textured laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding an polishing to edges to give high gloss finish etc. complete to all level: Granite of any colour and shade (area over 0.50 sqm)

Providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge: Granite work

Providing and fixing white china pedestal type water closet (European type) with seat and lid, 10 ltr low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangements with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requuired: W.C. pan with ISI marked white solid plastic seat lid

Providing and fixing water closet squatting pan (Indian Type W.C. pan) with 100mm sand cast iron P or S Trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manualy controlled device (handle lever) conforming to IS:7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern W.C pan of size 580x440mm with integral type foot rests

Providing and fixing wash basin with C.I brackets, 1500 C.P brass pillars taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: white vitreous china wash basin size 630x450mm with a single C.P brass pillar tap

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete: flexible pipe 40mm dia

Providing and fixing toilet paper holder: C.P brass

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of required make and shade with 6mm thick hard board backing: rectangularshape 453x357mm dia

Providing and fixing CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain and braa threaded fittings, including fixing the pipe with clamps at 1.00mm spacing. This includes jointing of pipes & fittings on step CPVC slovent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge: 10mm nominal outer dia pipes

40mm nominal outer dia pipes

Providing and fixing trap of self cleansing design with screwed down or hinged grating woith or without vent arm complete, including cost of cutting and making good the walls and floors, sand cast iron s&s as per IS 1729

Providing and fixing CPVC pipes, naving thermal stability for hot & cold water suplply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00m spacings. This includes jointing of pipes & fittings with on step CPVC slovent cement, trenching, refilling & testong of joints complete as per direction of Engineer-in-Charge

Providing and fixing CPVC pipes, having thermal stability for hot & cold water supply, including all CPVBC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with on step CPVC slovent cement, trenching, refilling & testing of joints complete as per the direction of Engineer-in-Charge: 20mm nominal outer dia pipes

Providing and fixing brass bib cock of approved quality 20mm nominal bore

Providing abd fixing ball Valve (brass) of approved quality high & low pressuer with plastic floats complete: 20mm nominal bore

Providing abd fixing ball Valve (brass) of approved quality high & low pressuer with plastic floats complete: 20mm nominal bore

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) 50mm nominal bore

providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, color opaque white or as approved by Engineer-in-charge. The rates includes making necessary holes for inlet, outlet and over flow pipes. the base support i/c fittings and fixures for tank shall be paid seperately.

providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to ISI:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion (i) single socketed pipes : 110mm dia

providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to ISI:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion

Earth work and excavation by mechanical means (hydraulic excavaator /manual mwans in foundation trenches or drains (not excedding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil as directed within a lead of 50m. ordinary rock.

Random rubble mansonry with hardstone in foundation and plinth including levelling up with cement concrete 1:6:12 at plinth level with cement mortar 1:6

providing and laying cement concrete bed in proportion 1:2:4 including necessary curing excluding cost of centering and shuttering

Centering and shuttering inccluding strutting, propping etc. and removal of dorm for:. Foundation, Footings, bases of columns etc. for mass concrete

Centering and shuttering inccluding strutting, propping etc. and removal of form for: suspended floors, roofs, landings, balconies and access platforms

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in. cement mortar 1:4 (1 cement : 4 fine sand)

Providing and laying in position specified grade of reinforced cement concrete excluding cost of centering and shuttering, reinforcement - all works upto plinth level. 1:1 5:3 coarse sand : 3 stone aggregate 20 mm

Torsteel reinforcement for R.C.C works including bending, binding, binding and placing in position complete in Bed Jali

12 mm cement plaster finished with floating coat of neat cement of mix 1:4 (1 Cement : 4 fine sand )

M/S Moon Enterprises (BID ID -3161932)

M/S SANSKAR TRADING (BID ID -3161820)