Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAccepted-AOC RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹46.2 L+₹81,620.99 (1.80%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹46.2 L+₹83,135.60 (1.83%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹46.6 L+₹1.2 L (2.72%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹46.7 L+₹1.3 L (2.82%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 89 EWS
GE 869 EWS C/o 99 APO Pin-913869
STN SPL REPAIR TO BLDG NO T-354 AND T-320 AND CERTAIN REVENUE AND MIOR WORKS AT UPPER LEIMAKHONG MIL
2022_MES_548026_1
8435/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHOG
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹88,000
Yes
29 Nov 2022
12 Sept 2022
17 Oct 2022
12 Sept 2022
14 Oct 2022
30 Sept 2022
Amount
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavating over areas, n exc 1.5 m deep and getting out of soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for PCC M-10 grade (Nominal mix) using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.
M & L for PCC M-7.5 grade, (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
Ditto all as per Sl item No. 13.00 here-in-above but except brick (NOTE: Seviceable brick obtained from demolition under Sl item No 3.00 here-in-above shall be reused under the item)
M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.
M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:6) complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cm (1:6) complete all as specified and directed.
M & L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces brick work or concrete surfaces finish the surfaces even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)
M & L for rendering 15mm thick plaster in cement mortar (1:4) on other than fair faces brick work or concrete surfaces finish the surfaces even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)
M & L for rendering 10mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
M&L rendering 15mm thick on other than fair faces of brick work in cement mortar(1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. Note: WPC will be measured and paid separately)
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition in ground floor and paving n.exc15cm thickness) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.
Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing all unserviceable materials from site complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
Dismantling framed steel trusses span N exc 10 m complete all as speicified and as directed
Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed
M & L Raised pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in cement mortar ( 1:4) complete all as specified and directed.
Supply only intergral water proofing compound.
M&L for PCC type M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate as in coping incl necessary formworkcomplete all as specified and directed.
M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed
M&L for 100mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L for 75mm thick PCC M-10 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L for 75 mm thick cement concrete type B2 1:2:4 using 40mm graded stone aggregate as in flooring, finishing the cement concrete surface even and fair to receive floor finishes complete all as specified and directed.
M&L 40mm thick PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate in floor, finishes even and rough to receive floor tiles complete all as specified and directed.
M&L 25mm thick PCC M-15 grade (Nominal Mix) using 12.5mm graded crushed stone aggregate in floor, finishes even and rough to receive floor tiles complete all as specified and directed.
M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L coloured non-skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:3) complete all as specified and directed.
M&L for precast cement concrete chequred tiles (ISI approved) of size 300mm x300mm x25mm thick, set and jointed and pointed in neat cement slurry in floor with grey cement and pigment including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M & L for RCC M-25 nominal mix using 20mm graded crushed stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete vcomplete all as specified and directed.
M&L for RCC M-25 (nominal mix) using 20 mm graded crushed stone aggregate as in beams, lintels and the like over 1.5m span complete all as specified and directed.
M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M & L TMT mild steel bars 6mm to 8 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed
M&L for preparation of newly plastered surface of wall, making the surface smooth by applying 3mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.
Fixing only Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for prepraration of old painted surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
S & F in door or window frame of any description with aluminium sections, coloured powder coating not less than 50 micron and fixing in position including all necessary cleats, lugs, breading and jointing arrangements complete all specified and directed
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in section 8 SSR Part II complete all as specified and directed.
M & L for Anodised aluminium powder coated window and ventilator shutters, fixed typewithout sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including all fitting complete all as specified
M & L for 4.8 mm thick sheet glass, ordinary quality and glazing with including necessary joining cleats, glazing clips, rubber packing in any shape n exc 0.5 sq. m in each pane for aluminum window complete all as specified and directed
S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified.
Providing and fixing flase ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4 mm thickness (as per IS 14862) size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level , suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanised @ 120 gm , both side inclusive) consisting of main "T" runner with suitably spaced at 1200 gm c/c and cross "T" of size 15x 32 mm made of 0.30mm sheet 1200 mm long spaces between main "T" at 600 mm c/c to form a gridof 1200 x 600 mm and secondary cross "T" of length 600 mm and size 15 x 32 mm made of 0.30 thick sheet interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in grid including , required cutting/making ,opening for service lie diffuser , grills ,light fittings, fixtures, smoke detectors etc, Main "T" runners tobe suspended from ceiling using GI soffit cleats fixed to existing truss with dash fastners, GI adjustable rod of 3 mm dia with galvanised butterfly level clips,spaced at 1200 mm c/c along main T ,bottom exposed widh 15 mm of all T sections shall be centra blac pre-painted with polyster paint and having a load bearing capacity of 12 kg/sqm complete at all heights as directed
M & L for two coat water based premium acrylic smooth emulsion of approved colour with silicon additive & colour stay technology , excellent dirt pick up resistance with low VOC less than 50 gram/litere as per the LEEDS specification. Anti algal properties in two coat @ 1.79 ltr (undiluted) /10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI allow 6-8 hrs to dry the surface for painting of subsequent quotes complete all as specified and directed. Note :- (a) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .l.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this Item.
M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.
M & L for water proof cemen based putty 1 KG (undiluted) per sq mtr of average thickness 1 mm over theplastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism ) having RPM not less than 1500 sanding padof 240 Grit or above to make the surface free from dust etc by skelled labour complete all as specified and directed
M & L for preparation of new plastered surfaces of wallls and applying two coats of oil bound distemper using airless spray technology with max woring pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and a mentioned in PS and accessories for applyin destemper should be able to spray in hard to reach areas and penetration of distemper on surface complete all specified and directed
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 25mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 30mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(b) complete all as specified and directed.
S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.
M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140mm overall length of cover plate complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F 100mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified nd directed
S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.
S&F in repairs 150mm long alumiunium handles cast type anodised complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
S & F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed
S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
S & F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed.
S&F Structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
S&F rolled sections as in main and cross beams,hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed.(Reffer to sketch)
M&L for structural steel work in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe- 290 (Gde E- 165) complete all as specified and directed.
S&F harrison rails of anodised aluminium alloy with fixing brackets, stops, rollers etc.complete all as specified and directed.
M & L for Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed
S & F in repairs bore bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed.
S & F 15mm bore bib taps (ISI marked) , cast copper alloy, chromium plated fancy type , screwed down, screwed for iron pipe for 15 mm bore or for brass ferule complete all as specified and directed.
S&F 15 mm dia pillar taps, ISI marked, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes and fixed complete all as specified and directed.
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
S & F in repair decorative brass curtain rod brackets fixed to wall with cadmium plated brass screws and plastic cleats complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall with steel clamps or laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall with steel clamps or laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend door type complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F PVC (SWR) vent cowl of dia 110 mm complete all as directed and directed.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.
S&F in repairs stop valves, ISI marked, 15 mm dia cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or unions complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan (pedestal pattern) white with plastic seat, closed pattern with flat bottom and with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting complete all as specified and as directed.
S & F in repair wash basin, vitreous china (flat back or angle back type), white, 550 x 440 mm size, white, including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed.
S&F in repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.
S&F PVC low level flushing cistern white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers complete all as specified and directed.
S &F 1.25mm thick steel rolling shutters without ball bearing of gear operated type with bevel gear box and crank handle as specified including top cover anchoring rod, hasp & staple and one shopcoat of primer, erected in posiition as indicated completed all as directed and specified.
M & L for 4mm thick plywood (no of ply 03), grade BWR, type BB fixed with nails or screws to timber frame work complete all as specified and directed.
M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed.
S&F 18/19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed
M & L 0.9mm decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
S & F 30 mm wide continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed
S & F Magnetic door catches of standard size for cupboard doors approved by Eng-in-Charge complete all as specified and directed.
M & L for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as speicified and directed
S & F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket and railing 60 mm long complete all as specified and as directed
S&F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs angle valve 15 mm dia cast copper alloy, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.
S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.
Taking up or down 15mm dia of steel tubing and connections and removal from site complete all as specified and directed.
Taking up or down 20mm dia of steel tubing and connections and removal from site complete all as specified and directed.
Cutting chases, pinning in. Making good to facings on brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Dismantling water tanks capacity exc. 500 litres and n.exc. 1000 liters and removing to store complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S&F in repair stainless steel sink with drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. (Make: Blue Star Model No BSSBSD-52 or equivalent in Nirali Brothers / Prayag/ Cera)
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed..
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.(Note: Screed bed will be measured & paid seperately)
M & L for screed bed 20 mm thick in CM 1:3 complete all as specified and directed
S&F in repairs vitreous china squatting pan “Orissa pattern of size 580x440mm white, back inlet and integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.
S&F Glass dividing strips, 3 mm thick and 38mm in width and inserted in position, conform to design complete all as specified and directed.
S & F vitreous China wash basin, white, flat back, size 630x450mm including brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed.
S & F vitreous china wash down water closet pan (pedestal pattern) white with integral foot rest with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting complete all as specified and as directed.
M&L for PCC M-10 grade (Nominal mix) as in concrete bed to drain pipes of 100mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specifed and directed.
Cutting into existing manholes for connecting new drains for pipe of 100mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in M-15 grade (Nominal mic) using 20mm graded crushed stone aggregate, smooth finished, and reforming benching as required complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed,multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulatorete including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following : - ( colour code to be followed). complete all as specified and directed
(a) One light point controlled by one, one way switch.
(b) One celling / exhaust fan point controlled by one, one way switch.
(c) One socket outlet 5 Amps 5 Pin on independent board
(d) One socket out let 5 Amps 5 pin on same board
All as per item No 2 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed by Engr-in-Charge.( circuit to be laid seperatly )
M&L for submain wiring in PVC Conduit alongwith earth wire with the following sizes of FRLS is PVC insulated copper conductor 2x4.0 sqmm & 1x4.0 sqmm earth wire single core cable in surface/recessed complete all as specified and directed
M/L for modular switch 6 Amps single pole one way.(Make: Havells /Indo Asian/ legrand)
M/L for modular socket outlet 2/3 pin 6 Amps combined 2 module.(Make: Havells /Indo Asian/ legrand)
S & F modular socket multipurpose 3 pin 6/16 Amps 2 module.(Make: Havells /Indo Asian/ legrand)
S/F ceiling rose , 3 phase/pvc/polycarbonate, isolated body.(Make: Havells /Indo Asian/ legrand)
M/L for modular switch 16 Amps single pole one way, one module.(Make: Havells /Indo Asian/ legrand)
Supply & fixing modular white cover plate with frame for fixing of modular switches of following :-
Ditto but 12 module. (Make: Havells /Indo Asian/ legrand)
Ditto but 8 module. (Make: Havells /Indo Asian/ legrand)
(c) Ditto but 6 module. (Make: Havells /Indo Asian/ legrand)
Ditto but 3 module. (Make: Havells /Indo Asian/ legrand)
Ditto but 2 module. (Make: Havells/Indo Asian/Legrand)
Ditto but 1 module. (Make: Havells/Indo Asian/Legrand)
S & F blank speacer plate for single module. (Make: Havells /Indo Asian/ legrand)
S & F modular step type two module electronic fan regulator heavy duty 120watts 240 volts. Make : Anchor/crub tree of havells
Taking down old u/s main switch/DBs/MCB DB with MCB and making good
S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral double door, 2 way, 240 Volts in concealed (Make: Havells /Indo Asian/ legrand)
S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral double door, 4way, 240 Volts in concealed (Make: Havells /Indo Asian/ legrand)
S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral double door, 8 way, 240 Volts in concealed(Make: Havells /Indo Asian/ legrand)
S &F MCB SPN 40 Amps 240 volts 10 KA rating (Make: Havells /Indo Asian/ legrand)
S &F MCB SPN 32 Amps 240 volts 10 KA rating (Make: Havells /Indo Asian/ legrand)
S&F MCB SP 06 to 32 Amps 240 Volts 10 KA rating (Make: Havells /Indo Asian/ legrand))
S/F in repair PVC Board 30 x 25 x 5 Cm depth medium quality ISI marked complete all a specified
Taking down LED tube light fitting kept in safe custody for refixing to its original position including provision of cable from ceiling rose or connected to light. complete all as specified and directed
Supply and fixing LED lights fitting 1x20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
Taking down old unserviceable service cable from and including battens/ suspending wires complete all as directed.
S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed
Taking down Ceiling fan/Exhaust fan, dismantling blades and kept in safe custody for refixing to its origianl position including provision of cable from ceiling rose or connected to fan complete all as specified and directed
Refixing ceiling fan/exhaust fan received from item No - 185 here in before and connecting up including provision of cable from ceiling rose or connector to fan. complete all as specified and directed
M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed
Supply and Lay steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete for 15mm dia. complete all as specified and directed
Supply and Fix bib taps cast copper alloy with crutch or butterfly handle, screwed down,screwed for iron pipe of 15mm dia. complete all as specified and directed
M&L drilling and tapping cast iron water mains (in position) for branch connections of internal dia 15 mm. complete all as specified and directed
Supply and Fix stop valves 15mm cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed
Supply & fix exhaust fan made of sturdy engeineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. complete all as specified and directed
S&F new generation, post top lantern, energy saving, environmental friendly, long life aesthetically designed die cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 with 1 x 25 watt high power LED including connection with twin core twisted flexible copper conductor cable complete all as specified and directed.
S&F LED globe moon prismatic light post top in spherical shape polycarbonate material suitable for retrofit LED lamp B22 base and incl easy to install with necessary connection complete all as specified and directed.
M/S BIJOYA LAXMI ENTERPRISE
MANI PRASAD GUPTA
M/s RS Enterprises & Supplier
SHARMA ENTERPRISE
RK Enterprises
M/S N JADUMANI SINGH
M/s Ritz Marketing
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .