Construction Wor Of Toilet Zone 6 Ward 54 Ramleela park Indira Nagar From Kamal Vatika Kalyanpur Legislative Assembly Kanpur

e/w in surface excavation not exceding 30 cm in depth but exceding 1.5 m width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by the engineer-in-charge 2.1.1 all kind of soil. Chapter-4 SI no 1 ref. to DSR/PWD 2.6(2.6.1)

1:4:8 (1 cement :4 coarse sand : 8 graded brick aggregate 40 mm nominal size SCH-275

1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size DSR/PWD 4.1.2

Centering and Shuttering including strutting propping etc. and removel of form work for (upto 5th floor) foundation ,footings base for column PWD/DSR 4.3.1

1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size DSR/PWD 4.1.2

Centering and Shuttering including strutting propping etc. and removel of form work for (upto 5th floor) foundation ,footings base for column PWD/DSR 4.3.1

Centering and Shuttering including strutting propping etc. and removel of form work for (upto 5th floor) foundation ,footings base for column PWD/DSR 4.3.1

Steel reianforcement for r.c.c work including straightering,cutting bending placing in position and binding all complete upto plinth level.PWD/DSR5.22

Brick work with common burnt clay (Non Modular) Bricks of class-150 in foundation and plinth in: cement mortar 1:6 DSR 6.1.2

Brick work with common burnt clay (Non Modular) Bricks of class-150 in foundation and plinth in: cement mortar 1:6 DSR 6.1.2

Provinding and fixing 1st quality ceramic glazed wall tiles conforming to is:15622 (thickness to be specified by the manfacturee) of approved make,in all colour shades except burgundy,bottle black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 and jointing with grey slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.PWD/DSR 8.31

Provinding and fixing 1st quality ceramic glazed floor tiles of size 300 x 300 mm conforming to is:15622 (thickness to be specified by the manfacturee) of approved make,in all colour shades except white,ivory,grey fume red brown laidon 20 mm thick bed of cement mortar 1:4 and jointing with grey slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.PWD/DSR 11.38

25mm nominal outer dia pipe

40 mm nominal outer dia pipe

20mm Nominal outer dia pipes

110mm dia

160 mm dia

110mm dia

Providing and fixingwash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, includingpainting of fittings and brackets cutting and makinggood thewalls wherever require: White Vitreous China Wash basin size 450X 300 mm with a pair of 15 mmC.P

Providing and fixing of PVC waste Pipe Lines….. Complete item

Providing and Fixing Gun Metal Valve…... Complete item

15 mm nominal bore

Orissa pattern W.C.pan of size 580 x 440 mm 17.13.2

Provinding and fixing P.V.C Low level flushing cisten with manually controlled device (Handle lever ) conforming to is 7231 with all fitting and fixtures complete. 10 litre capacity white DSR 17.19.1

Providing and Fixing White Vitreous China Flat Back or Wall corner type lipped Front Urinal Basin

Supply and hoisting of low Density polythene seamless one peace moulded tank and Placing the same position…. Complete item

Providing and Fixing PTMT Bib Cock of Approved Quality And color ….... Complete item

Providing and fixing CP Brass Angle Valve basin Mixer And Geyser Point….... Complete item

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge. (DSR : 9.119)

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. (DSR : 9.120)

100mm Nominal dia pipe

Providing and Fixing of Stainless Steel ( Grade 304) …... Complete item

S/F of 4x2.5 feet size granite stone at site including writing painting with graving and cartage up to site complete/