Construction of Krishi Vigyan Kendra building at Taboo District Lahual and Spiti SH Providing EI therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink,with anti glare polycarbonate diffuser and energy efficient constant integral,electronic driver,suitable for input voltage:AC 220-240 V,50/60Hz,complete with all accessories,including mounting clips & loop in loop out wire,connections,testing and commissioning etc.as required with two years warranty. Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge.

LED Batten Light 20 W 1200mm

Providing and installation of following type of surface / recess mounting slim square / round type LED Downlight with two years warranty in white finish with anti glare polycarbonate diffuser and separated energy efficient constant current, non-integral, electronic driver, suitable for input voltage: AC 220-240V, 50/60 Hz complete with all accessories, including making suitable cut-out in the existing ceiling, connections, testing and commissioning etc. as required. Make:- Philips, Twinkle, GE or any other approved by Engineer-in-Charge.

LED Downlight 6 Watt

LED Downlight 15 Watt

Providing and installation of following type of Surface / Recess mounting Round / Square type LED Panel Light , powder coated housing made of CRCA sheet, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required with minimum 2 years warranty. Make: Twinkle, GE, Philips or any other approved by Engineer-in-Charge.

LED Panel Light 36 Watt. ( Size : - 2' x 2' )

LED Panel Light 36 Watt. ( Size : - 1' x 1' )

LED Panel Light 36 Watt. (Size : - 1' X 4')

3-phase hot air blower 4.5 KW

3-Phase hot air blower 6.0 KW

Providing and installation of following type of Fresh Air Ventilating fan Non-metallic range with lower Shutter of following sizes in the existing opening, including making the hole to suit the size of the fan, making good the damages, connections, testing and commissioning etc. as required Make: Havells, Khaitan, Bajaj, Crompton, Standard or any other approved by Engineer-in-Charge.

Fresh Air Ventilating fan 250 mm sweep

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of 200mm X150 mm X 75 mm deep ( nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp piano type switch, connection, painting etc.as req. (For light plugs)

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.

S.P. 5/ 6 Amps one way switch, piano type.

5 pin 5/ 6 Amps socket outlet, porcelain base/ piano type.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 95 sq. mm (3.5 core)

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub-main wiring/cable as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit/sub-main with 4X1.5 Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No. 1.5 Sq. mm (4X1.5+2X1.5) HRFRL/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with 4x2.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.2.5 Sq.mm.(4X2.5+2X2.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. 5/6 Amp Cat-A.

Single pole. 15/16 Amp Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCH DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-4 way

Distribution board:- Supplying and fixing of following way L & T make MCCB incomer 3- Phase 7 set segregated DB of suitable dimensions made from 1.6 mm thick CRCA sheet on surface / recess with incomer MCCB spreader links, busbar, 4 module sub-incomer in each phase and SP MCBs as outgoing, complete with tinned copper bus-bar, wire-set, labels interconnections, phosphatized and powder painted metal door IP 43 including earthing etc. as required.

MCCB incomer SEGREGATED DB

Highlights:-

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3

IK 09- for double door DBs

Available in CRCA sheet steel, RAL 9003, powder coated

Ready to use DBs:- Provided with 100 A insulated phase bus-bars, neutral bars with shrounds, earth bars, sticking saddles, cements pill protector, color-coded interconnection wire set, cable ties, blanking plates and circuit identification labels.

With provision for MCCB incomer:- TP/FP DU100H MCCB as incomer, DP RCCB / RCBO as sub-incomer and SP MCBs as outgoings

Cat No. DBPGL006DD

Make:- incomer 3-phase 7-segment segregated DB double door 6- way

Providing, fixing and installation of following rating and breaking capacity MCCB with Thermal Release Having inbuilt Overload and Short Circuit Protection in the existing cubical panel board including drilling holes in the cubical panel, suitable for input voltage: 415/500 Volt AC, 50 Hz, complete with all accesories, including making connections, testing and commissioning etc. as required, Make: L&T, Havells or any other approved by Engineer-in-Charge.

MCCB DU0-100D 3 Pole 20-Amp. Breaking Capacity 36-KA

MCCB DU0-100D 3 Pole 32-Amp. Breaking Capacity 36-KA

Providing, fixing and installation of following rating and breaking capacity MCCB with Thermal Release Having inbuilt Overload and Short Circuit Protection in the existing cubical panel board including drilling holes in the cubical panel, suitable for input voltage: 415/500 Volt AC, 50 Hz, complete with all accesories, including making connections, testing and commissioning etc. as required, Make: L&T, Havells or any other approved by Engineer-in-Charge.

MCCB DN2-250N 3-Pole 160-200 Amp breaking capacity 50-KA

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 900mm & cross-sectional area (25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (980mmx450mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Kalra Hardware and Electric Store