Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹21.9 L+₹13,184.02 (0.61%)Rejected-Finance C O MANOJ KUMAR KESHRI MIRA SADAN ROAD NO 03 ANAND VIHAR NEAR WAXPOL FACTORY BOOTY MORE BUTI RANCHI JHARKHAND 834012 | RANCHI | RANCHI | JHARKHAND | 834012 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹22.3 L+₹53,900.28 (2.47%)Rejected-Finance VIKASH NAGAR ROAD NO 1 NEAR GAUSHALA RAMGARH CANTT JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹22.4 L+₹58,369.32 (2.68%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹22.7 L+₹90,233.37 (4.14%)Rejected-Finance 20 23 MANASKAMANA ROAD BANSBARI MORE PS ENGLISHBAZAR DT MALDA | ENGLISHBAZAR | MALDA | WEST BENGAL | 732101 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹24.2 L
EMD Value
₹48,500
Closing Date
13 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT P.O. HOTWAR RANCHI - 834012
PROVN OF 02 X TOILET AND SEWAGE LINE AT HQ INF BDE OFFICE COMPLEX AT DIPATOLI POCKET OF RANCHI MILITARY STATION
2022_MES_562889_1
8000/1863/E8
Open Tender
Civil Works
Item Rate
180 days
Deepatoli
Class E, Category a(i)
8 documents required · 8 mandatory
₹500
Yes
GE Dipatoli
₹48,500
Yes
17 Jan 2023
23 Nov 2022
15 Dec 2022
23 Nov 2022
13 Dec 2022
7 Dec 2022
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Exavation over area not exc1.5 mtr deep and getting out in soft/loose soil complete all as specified and directed.
Ditto as per item No 2 above but exceeding 1.5 mtr but n.exc 3.00 mtr deep.
Ditto as per item No 2 above but exceeding 3 mtr but n.exc 4.5 mtr deep.
Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.
Removing surplus excavated soil to a distance n.exc 50 meter and depositing where directed at leveln.exc 1.50 m above the starting point, complete all as specified and directed.
M&L Reinforced cement concrete in mix (1:1.5:3) (using 20mm graded aggregates) in foundations, including rafts, footings, plinth beams etc complete all as specified and directed.
All as per item No 07 above but in Columns, pillars.
All as per item No 07 above but in chajjas
All as per item No 07 above but in beams and lintel
All as per item No 07 above but in floor/roof slab
M&L formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits of foundation and plinth beam, and similar work, vertical or batter work fair finished flat surface of concrete complete all as specified and directed.
All as per item No 12 but in columns/post
M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.
M&L brick work using sub class B brick curved or straight on plan to any radius in half brick thick wall built in CM (1:4), complete all as specified and directed.
M&L 15mm thick plastering on wall concrete surfaces in CM (1:6) finished even and smooth w/o using extra cement, complete all as specified and directed.
M&L cement concrete as in plinth type C-1 (1:3:6) using 20mm graded stone aggregate complete all as specified and directed.
M&L Cement concrete in floors 40mm thick over sub base (1:2:4) using 20mm graded aggregate finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 10 mm thick in cement Mortar (1:4) on the surfaces of ceiliing and finished the surface fair and even complete all as specified and directed
M&L preparation of newly plastered surfaces of wall/ ceiling and applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth complete all as specified and directed.
M&L hard core of gauge n'exc 63 mm of broken stone or boulders deposited spread and leveled in layers n. exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L for applying two coats of oil bound distemper over one coat of chalk whiting on plastered surfaces of wall, preparatory to distempering including preparation of newly plastered surface complete all as specified and directed.
M&L for applying two coats of oil bound distemper over one coat of primer on plastered surfaces of ceiling, preparatory to distempering including preparation of newly plastered surface complete all as specified and directed.
M&L preparing new surface on walls and applying two coats of cement based paint over one coat of primer on external walls, complete all as specified and directed.
S&F 10mm dia and over deformed/TMT treinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia, complete all as specified and directed.
All as per item No 25 above but 6 to 8 mm dia.
All as per item No 25 above but 8mm dia as in stirrups
M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450 x 350 x 7mm thick including over 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.
S&F PVC door chowkhats of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame complete all as specified and directed.
S&F mild steel butt hinges 100mm long medium weight cold rolled, complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed of 150mm size, complete all as specified and directed.
S&F 125mm size aluminium handles, cast type anodised, complete all as specified and directed.
S&F 15mm dia stop valve CP fancy type long body screwed to unioun or GI pipeetc, complete all as specified and directed.
S&F GI water tubes medium grade 15mm bore with fittings laid in floors/wals complete all as specified and directed.
All as per item No 36 above but 20mm bore, complete all as specified and directed.
S&F Vitreous china white wash down water closet (Pedestal pattern) wall hung including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap, complete all as specified and directed.
S&F PVC valveless syphonic action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore make complete all as specified and directed.
S&F bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S&F pillar taps fancy type cast copper alloy chormium plated 15mm bore with crutch, screwed down, screwed for iron pipe or for brass ferrule
S&F in chromium plated jet spray / health faucet, complete all as specified and directed.
S&F chromium plated toilet paper holder size 150 x150mm complete all as specified and directed.
S&F vitreous china wash basin, (pedestal type) white flat back size 550x400mm (excluding taps, incl. CP waste coupling & PVC waste pipe and brackets, complete all as specified and directed.
Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar (1:3) to ends and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth, complete all as specified and directed.
S&F angle valve / stop valve, cast copper alloy fancy type chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified and directed.
S&F Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type), complete all as specified and directed.
S&F vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.
S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed.
S&F PVC Connections 15mm size and 450mm length, complete all as specified and directed.
S&F 110mm PVC (SWR) branch pieces, single equal or unequall, complete all as specified and directed.
S&F 110mm PVC (SWR) Bends any radius, complete all as specified and directed.
S&F 110mm PVC(SWR) vent cowls, complete all as specified and directed.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
Use and waist form work to soffits of suspended slabs such as roof slabs, floor slabs n.exc 200mm thick in rough finished surfaces etc, complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) on any faces brick work including finishing the surface fair and smooth without using extra cement with mixing of water proofing compound complete all as specified and directed. (WPC measured and paid separately)
M&L for rendering 10 mm thick in CM (1:3) on any faces of concrete surface including finishing the surface fair and smooth without using extra cement with mixing of water proofing compound complete all as specified and directed. (WPC measured and paid separately)
M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole, mass concrete etc complete all as specified and directed.
Supply only integral water proofing compound, complete all as specified and directed.
Providing and fixing of powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces complete all as specified and directed :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b) Three way track for sliding shutters of cross sections 91.80 mm x 31.75mm x 1.1 mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1 mm (d) Aluminium glazing strip of size 18.2 x 16.66mm (e) 4 mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter 01 No. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window
S&F Powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified and directed.
S&F Powder coated aluminium door frame of approved manufacturer using approval aluminium section of following sizes fixed to floor, wall with rawl plug and screwe, etc, complete all as specified and directed. (a) Door frame of size 95.25mm x 44.45mm x 1.5mm
M&L oil based bitumen primer @ 0.3 L/Sqm on plaster surface, complete all as specified and directed.
M&L APP membrane 3mm th min wt 4 kg/Sqm for water prooping of roof sealing with 100mm over lap, complete all as specified and directed.
M&L two coats of alumunium paint over bituminous surface of membrane, complete all as specified and directed.
M&L Ball brass valves, high pressure, with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed 20mm bore, complete all as specified and directed.
S&F 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.
S&F stop valves, 20mm bore dia of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed, complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil etc. including trimming bottom and sides of trenches, leveling/ grading and ramming bottom of excavation complete all as specified and directed.
S&F ultra plus PE, DWC (Double Wall corrugated) pipes confirming IS-16098 Part-2 : 2013 pertaining structured wall plastics pining system for Non-pressure drainage and sewerage 150 mm bore pipe and fittings with non smooth surface, type B complete all as specified and directed.
M&L for brick work with sub class "B" bricks straight or curved on plan exceeding 6 mtr mean radius and built in CM (1:4) complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in precast manhole covers including necessary form work and setting in CM (1:4) complete all as specified and directed.
M&L for PCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in channels surface, laid to shape and slope, surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and directed.
M&L for brick work with sub class 'B' bricks in one brick thick honey com walling built in CM (1:4) complete all as specified and directed.
M&L for Filling of brick bats in soak well laid dry complete all as specified and directed.
M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 150mm bore, laid to slope including packing under and hanuching against the sides of pipes after they are laid and tested complete all as specified and directed
M&L PCC (1:2:4) type B-O, using 12.5mm graded stone aggregate as in manholes floors etc and to be finished even and smooth with using extra cement complete all as specifed and directed
M&L for 100 mm thick cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in sub base of pathway & parking area complete all as specified and directed
S&F machine pressed precast concrete interlocking paver block any shape and size coforming to IS 15658-2006 of 60 mm thick using rubber moulded casting with glosy finish with grey cement and pigment M-35 grade of concrete complete including 50 mm sand cushion complete all as specified and directed.
M&L for spreading and levelling of sand in layers n. exc 25cm thick over sub base complete all as specified and directed.
M&L cement concrete type B1 (1:2:4) (20 mm graded crushed stone aggregate) as in coping, bed block, water trought and similar works including rounding, chamfered and throating complete all as specified and directed.
M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through PVC conealed conduit 20/25 mm dia on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes, cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.
All as per Ser item No 85 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.
All as per Ser item No 85 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.
All as per Ser item No 85 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.
Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified and directed.
S&F Switch piano type, single pole, one way 15 Amps complete all as specified and directed.
S&F Socket outlet 2-in-1, 2/3 pin 5 Amps complete all as specified & directed.
S&F Socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type complete all as specified & directed.
S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.
M&L for lamp holder, PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed
M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor, PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. Note : (i) All three wire (Phase red colour, neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) Painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)
All as per ser item No 95 here-in-before but 2x2.5 Sqmm and 1x 2.5 Sqmm for Earth wire
All as per ser item No 95 here-in-before but 2x4 Sqmm and 1x 4.0 Sqmm for Earth wire
All as per ser item No 95 here-in-before but 2x 6 Sqmm and 1x 6.0 Sqmm for Earth wire
Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/ accessories complete all as specified and directed
Supply and fix MCB DB TPN 4 way with metal door suitable for Provision of incommer and out going MCBs grouting/ flush in wall and making good to disturbed surfaces incl fixing material/ accessories complete all as specified and directed.
S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles, complete all as specified and directed.
S&F in replacement of MCB DP 63 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.
Supply and fix water heater storage type, electric, capacity 25 litres BEE 5 star rated, complete all as specified and directed.
S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed
S&F in replacement of Lienear & compact 9 wat LED mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser including 2/3 core flexible copper wire with flexible pipe ceiling rose to light fittings complete all as specified and directed
S&F in replacement of building LED security light fitting 35 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut, bolt, washer etc complete all as specified and directed
S&F Exhaust fans AC single phase 230/240 volt of size 300 mm sweep with louver, complete all as specified and directed.
Supply, Laying on replacement, connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable complete all as specified and directed.
Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete all as specified and directed.
Supply and Spread dry river sand for cable cushioning in trenches complete all as specified and directed. Note : Punned down thickness shall be considered for measurement .
Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection complete all as specified and directed.
M&L Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on complete all as specified and directed. Note :- (i) Earthing test must be carried out in presence of Engr-in-Charge. (ii) The earthing result not more than 2 Ohms or disered earth resistance value. (iii) Megger required for testing will be be provided at site by the contractor. (iv) Contractor shall submit earth resistance testing report before submission of bill.
M/S.R.S.Chauhan and Sons
M/S KAMLESHWAR SINGH
MS JODHI PRASAD SINGH SONS
M/s Mukesh and company
M/S SHAMBHU SHARAN SINGH
ashiyana electrical company
united builders
M/s Kundu Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .