SPECIAL REPAIRS TO BLDG NO P-97 FORGING SHOP OF 515 ABW TECH AREA AND ONE REV WORK UNDER GE(SOUTH) BENGALURU

Amount

Dismantling existing water proofing treatment any type and thickness from top surface of roof slab and removing the materials from the site etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof/floor complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately as supply only under relevant item of this schedule)

Supply only integral water proofing compound complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms per sqm) and on primed surface by forced application over priming surfaces and applying normal treatment (for moderate condition) using glass fibre base bitumen felt grade 2 and applying a coat of aluminium paint on top surface complete all as specified.

Demolition of cement concrete (reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor) and removing debris from site and dumping as directed.

M&L 75 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregate), as in sub base of floors.

M&L 150 mm thick cement concrete type B-2, 1:2:4 (using 40 mm graded crushed stone aggregate), as in floors incl Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green finished even and smooth complete all as specified and directed.

M&L 75mm thick cement concrete type B-2, 1:2:4 (using 40 mm graded crushed stone aggregate), as in floors, finished the surface even and smooth complete all as specified and directed.

M &L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A all as specified and directed.

M &L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed

Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:4 mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and fair complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid for separately as supply only under relevant item of this schedule)

M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment of old treated surfaces of walls including washing, rubbing etc. and applying two coats of cement Base paint on walls, ceiling, chajja etc. over a coat ot primer as per manufactures instructions with all necessary scaffolding etc complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall and applying three coats of white wash over 1 mm thick of wall care putty over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of old treated surfaces of walls including washing, rubbing etc. and applying three coats of white wash over 1mm thick wall care putty on walls, ceiling, chajja etc. with all necessary scaffloding etc.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer surface complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm complete all as specified and as directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders; framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe-290 Gde-165.complete all as specified and as directed.

S&F steel windows with side hung shutters incl projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded.complete all as specified and as directed.

S&F Steel windows or ventilators, fixed type, with glazing bars all as specified and as directed.

S&F Framed work as in doors or windows of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering of Fe 410 -W(GdeE- 250) quality-A. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, and treated with tar or coal tar black paint complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hold fasts; wall ties; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F Expanded metal, exc 4kg per sq mtr cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specifed and as directed. Note - Thickness of metal should be more than 3mm and weight should be more than 5.5 Kg per sqm.

M&L preparation of old painted steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enemel paint.complete all as specified and as directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for providing precast RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in cover slabs (for manholes etc) complete all as specified and as directed.

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips.complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pin, spring/clips and providing and fixing new ones.complete all as specified and as directed.

M&L for 4 mm thick solid Fibre sheet glass of superior quality and fixed to wooden/metal frame with necessary clips/screws all as specified and directed.

M&L for 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 35 mm thick 2nd class hardwood rail and styled plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated.complete all as specified and as directed.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

Dismantling wrought iron or mild steel works of any description not otherwise provided for.complete all as specified and as directed.

S&F rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle channel or flat sections) incl distance pieces, cleats etc., Conforming to Fe-410-W (Gde-E-250).complete all as specified and as directed.

Taking down Rolling shutter with all necessary fitting and fixture exc 15 Sqm but n.exc 20 Sqm complete all as specified and as directed.

S&F 1.25 mm thick steel rolling shutters, without ball bearing, as specified incl top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle with all accessories all as specified and directed.

Dismantling cement (corrugated, semi corrugated etc,) sheets in roof covering.complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and gutter, fixed with self tapping screws as specified.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc,complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles

M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for 75 mm thick, PCC 1:3:6 type C-2 (using 40mm graded stone aggregate), finished even and fair as in plinth protection incl joints filling complete all as specified.

Surface Excavation n. exe 30 CM deep and averaging 15 CM deep and getting out in soft/loose soil.complete all as specified and as directed.

M&L hardcore broken stone boulders of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered & rammed to a true surface complete all as specified & directed by Engr-in-Charge.

M&L 75 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregate), as in sub base of floors.complete all as specified and as directed.

M & L for sand filling under floors for laying top layer including watering and consolidation complete all as specified and as directed.

S&F machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment conforming to IS 15658-2006 of 60 mm thickness M-35 Grade.complete all as specified and as directed.

M&L 20cm x 20cm x 25 mm thick coloured Chequered cement concrete tiles , set and jointed & pointed in grey cement and pigment mixed with neat cement slurry as in path/floor etc complete all as specified & directed by Engineer-in-Charge. Note : The size , colour & combination of tiles as approved by GE.

M&L screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed by EIC.

M &L providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl weathering slightly rounded or chamfered angles and throating as directed.

Removing excavted materials n exc. 50 m and depositing where directed at a level n . Exc. 1.5 m above the starting point complete all as specified & directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft/loose soil complete all as specified and as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, Filling and mass concrete complete all as specified and directed.

M & L for Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed by Engr-in-Charge.

S &F MS Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk) forming holes, without any attachment complete all as specified & directed by Engr-in-Charge.

M&L preparation of new or previously untreated steel and steel based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified..

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified & directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in existing sunk boxes and covered with new 3.00 mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches/sockets/regulators etc for .(a) One light/CB point controlled by one switch

(b) One 3 pin 5 Amps socket point on the same board with other switches complete all as specified and as directed.

(c ) One 3 pin 5 Amps socket outlet point on independent board

All as per srl item No 70 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 3 pin 15 Amp socket outlet.

M & L switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed.

M&L switch socket outlet 2in1, 3pin,5A complete all as specified and as directed.

M&L switch socket outlet 2 in 1, 3 pin, 5 Amps and 15 Amps flush type.complete all as specified and as directed.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals.complete all as specified and as directed.

Supply and fix steped type electronic fan regulator flush type, 230 volt, AC complete all as specified and as directed.

Taking down old DB/MCB/Main switch /Teak wood board etc complete all as specified and as directed.

S&F sheet metal enclosure for MCB DB for 8 way,SPN double door 240 Volts 200Amps rated bus bar 240 volts IP-43, suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

Supply and fixing in repairs MCB DP-32A, 240 Volts complete all as specified and as directed.

Supply & fixing in repairs MCB SP 06-32 Amp, AC, 240 volts, complete all as specified and as directed.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit including taking down of existing sub main wiring complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Supply and fixing in repairs surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 24 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge.

Supply and fix in repairs LED flood light 210Watts 230V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp

M & L for GI Bracket for street light fittings 32mm dia 1.2m including D/C clamps for PCC/steel poles round /Square nut bolts and washers etc and painting of bracket and clamps with enamel paint of two coats etc complete all as specified and as directed.

S & F in repairs street light LED fittings 60Watt 230V AC out door type with high pressure die cast aluminium hoisting and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant incluing thermal management in multiple optics with IP 65/66 protection etc complete all as specified and as directed.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB including taking down of existing earthing materials complete all as specified & as directed

SREE BALAJI CONSTRUCTIONS

Ravees Enterprises

ACCITE