RENOVATION OF DIRECTOR OFFICE ROOM NO 234 CONSTRUCTION OF CONTROL CUM MONITORING ROOM AT CABS AND CERTAIN MINOR WORKS AT ADE UNDER GEI RD EAST BANGALORE

Amount

S&F PVC sheets 1.5mm thick laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed Colour approved by Engr-in-Charge.

Providing and fixing specified wood frame work consisting of battens fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. 8.27.1 Kiln seasoned and chemically treated hollock wood cum 163814.10

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

M&L 1.5 mm decorative laminates type I, or surface finish, colour and pattern as approved by Engr-in-charge.

Providing and fixing of gypsum board false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and including taking down old ceiling & 2mm thick wall care putty over a coats of primer and two coat of premium emulsion paint suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

S & F for Roller venetian blinds with approved fabric and powder coated aluminium fittings such as top roller metal weight nylon button loops etc to match with the top rail metal base complete all as specified including dismantling unserviing one.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. including use of ms plate wherever required, all complete

Painting with synthetic enamel paint two or more coats of approved brand and manufacture to give an even on new work.

Provoding and fixing float glass panes 5.0 mm thick glass panes fixed to frame work including rubber beading etc complete.

Providing and fixing of 12mm thick bison or equivalent board exterior quality grade(Cement bonded particle board made out of cement and mineralized wood particles) including cutting of sizes fixing arrangements complete all as specified.

S&F 30mm thick regid PUF TR panel made out of profiled sheet on top and plain sheet at bottom with CFC free pentane blown polyurethane foam as the core (the core is CFC/HCFC free pentane blown polyurethane foam density of 40+2 kg /cum in 50mm thick sheet ) the panel sheet having 1000mm cover width , 34.5mm crest height @333mmc/c made out of 0.5mm TCT 300mpa stress , colour coated galvalume steel sheet 150 GSM aluminium zinc coated with 20 micron polyester paint , the sheet shall be fixed with self drilling self drilling seif tapping fasteners ,all as specified.

S & F 12mm thick glass door wave free toughened clear glass with stainless steel fitting,as per design with and including provision of all other neccessary fixture and accesaries,complete all as specified and directed.

Dismantling tile work of thickness upto 40 mm thickness in floors and roofs laid in cement mortar including removal of material out side MD land within 5 KM .

Providing and laying vitrified floor tiles double charge size of tile 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting with epoxy grout to match the joints etc complete

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Distempering two or more coats including 2mm thick wall care and complete removal of old treatment with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L hard core of gauge not exc 63 mm of broken bricks aggregate spread and levelled in layers not exc 15 cm thickness watered and rammed to a true surfaces

Material and labour for 100mm thick cement concrete (1:4:8) type D2 using 40 mm graded crushed stone aggregate as sub base flooring complete all as specified.

Material and labour for kerb stone made out of PCC 1:2:4 using 20 mm graded stone aggregate of cross sectional size 150 mm at bottom and 110 mm at top (tapering at length 210 mm height) with overall height 320 mm and 450 mm in length, surface finished even and smooth laid as directed as in road side kerb, setting in cement mortar 1:6 complete.

M & L for sand filling under floors or in foundations including watering and consolidation for laying of interlocking paver blocks (Note : mining sand/stone dust shall be of approved quality and should be free from lumps/broken/flaky aggregate)

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade. Note (paver block to be approved by GE).

Preparation of concrete surfaces of any description and applying two coat of synthetic enamel paint in different colours if required over a coat of priming paint as in kerb stone painting complete all as specified and as directed

Removing excavated material to distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing to low level area.

Material and labour for 75mm thick cement concrete (1:4:8) type D2 using 40 mm graded crushed stone aggregate as sub base flooring complete all as specified.

M&L Vitrified ceramic double charged tiles of size 10 mm thick light shade, area of each tile not exceeding 0.36 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Removing excavated material to distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

Excavation in trenches not exc 1.5m wide and not exc 1.5 m deep for foundation etc for manholes etc not exc 10 sqm on plan and not exc 1.5m depth and getting out in any type of soil

Excavation over area not exc 1.5m deep and getting out in hard soil.

Add to item No. 31 herein above for each additional 1.5m or part thereof in depth beyond first 1.5m in depth and getting out in hard soil etc complete all as specified and directed.

Add to item No. 32 herein above for each additional 1.5m or part thereof in depth beyond first 1.5m in depth and getting out in any type of soil etc complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil etc complete.

Supply and lay salt glazed stone ware drain pipe grade 'A' 150mm bore laid on concrete bed and jointed complete all as specified and directed (Make : Jai Jalaram/Giraco/AG Karimji)

M&L for Cement concrete bed to drain 1:3:6 type C-2 using 40mm graded stone aggregate to SWG drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debries outside MD land all as specified and directed.

M&L 100 mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base/foundation.

M & L for Type B1 Type 1:2:4 20mm graded graded Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete

Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 as in sokage well.

M&L for Loose filling with broken brick aggregates of gauge 80 to 150 mm in soakage pits, soakage wells

S & F PVC (SWR) pipes single socketed 110 mm bore fixed in septic tank as vent pipe complete all as specifed and as directed.

S & F PVC (SWR) Vent cowl 110 mm bore complete all as specifed and as directed.

M & L rendering 15mm thick in CM 1:4 over stone masonary/brick masonary surface finished even and smooth without using extra cement.

Material and labour for PCC 1:2:4 Type B-1, 40 mm thick using 20 mm graded stone aggregate as in Sub base flooring finished fair and even.

Supply and fixed TMT bars 10mm dia and over, cut to length, bent to shape required including making few slab handle & rungs & cranking bending mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed confirmed to FE 410-0.

Material and labour for pre cast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in manholes/septic/soakage cover slab etc, set in cement mortar 1:4 including necessary use and waste of form work complete all as specified and directed.

Removing excavated material exceeding 250m but not exc 500m and depositing where directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

M&L for Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable two run in concealed/surface / recessed, medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. (a) one light point controlled by one, one way switch 5 Amps

One Ceiling fan point/wall fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One bell/buzzer point controlled by one push button independent with cable of size 1.5 Sqmm complete all as specified and directed .

M&L for Wiring for following light/ power plug with 2X1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 1.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required for 5 A socket on independant board complete all as directed.

M&L for Wiring for following light/ power plug with 2X1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 1.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required for 5 A socket on same board complete all as directed.

M&L for Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required 15 A power plug complete all as directed.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell push

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supply & fix exhaust fans PVC body (as reqd at site) with AC single phase 230/ 240 V of size 300 mm sweep with louver complete with all connections all as specified and directed by Engr-in charge.

Supply and replace decorative surface mounting ,dome shaped pendent in green & black fineshes with complete connection and lamp with all electric connection complete all as specified and directed . Make -Havells or eqpt

Supply and replace decorative flexible LED Streeps 24 watt 3000K with uniform light distribution and long lasting adhesive for perfect cove lighting soluation with all electric connection complete all as specified and directed . Make -Havells or eqpt

Supply and replace a unique mood lightening soluation flexi RGB strip 2.5 watt Flexon LED USH TV RGB strip that can mounted as a backlight behind TV Screens of upto 1.52 m with an IR remote with all electric connection complete all as specified and directed . Make -Havells or eqpt

Supply and replace decorative wall light ,gold finish fixture with cognac hammerered glass diffuser suitable for 7.5 watt LED filament lamp E-27 base with all electric connection complete all as specified and directed . Make -Havells or eqpt

Supply and replace decorative wall mounting light brushed nickel finish fixture with opel glass diffuser suitable for with 9 watt LED lamps B22 base with all electric connection complete all as specified and directed . Make -Havells or eqpt

Supply and replace New innova Neo swivel spot light Aesthetically designed lens based accent light for crisp light out put suitable 6 watt LED 3000K with all electric connection complete all as specified and directed . Make -Havells or eqpt

Supply and replace Crysta chip on board (COB) swivel down light with crisp light throw and high CRI suitable for 6 watt 3000k with all electric connection complete all as specified and directed . Make -Havells or eqpt

Supply and replace slim compact aluminium die cast edge lit panel Recess mounted square mounted square fixture with opal diffuser and separate electronic suitable for 18 watt LED 3000K with all electric connection complete all as specified and directed .Make -Havells or eqpt

Supplying and fix 4 way (4 + 12), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc as required

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required complete all as directed.

Material and labour for Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete all as directed.

M & L Wiring for circuit/submain wiring alongwith earth wire in PVC condiut with the following sizes of FR PVC insulated copper conductor, single core cable in concealed/surface/recessed as required and directed.

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

M & L for Modular telephone socket RJ 11 (jack type)one module complete all as specified and directed Note : - only Socket will be provided by MES, Telephone & Lan wiring is not a part of MES, wiring/crimping and all acessories will be done by user specification & requirments

M & L for LAN cable socket RJ 45 UTP information outlet tool less 2 module type complete all as specified and directed Note : - only Socket will be provided by MES, Telephone & Lan wiring is not a part of MES, wiring/crimping and all acessories will be done by user specification & requirments

M & L for Cover plate with frame for telephone socket RJ 11 (jac type)1 module with metal flush boxes of suitable size complete all as specified & directed

M & L for Cover plate with frame for lan cable socket RJ 11 (jac type) 2 module with metal flush boxes of suitable size complete all as specified & directed

S&F Modular metal flush box c/concealed run on walls/floors/ceiling for LAN & Telephone ,cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed .

S & Fixing modular charging socket to charge the mobile with complete connection all as specified

Supply, Install ,testing and commisioning of five star rated hi wall split units indoor/outdoor with cordless remote control unit and with in built air ioneser and pasma filter for better indoor Air quality with latestest inverter technology with hot & cold having ECO friendely refrigerent gas ,copper condenser coil of capacity 2.0 TR including all fixing arrangement (as requirment at Site) all as specified and directed by Engr In Charge. Make-BLUE STAR/HITACHI/DAIKIN/CARRIER

Supply and fix Voltage stablizer electric driven single phase of capacity of 5 KVA suitable for 2.0 Ton Airconditioner. Make -VGUARD/UNISTAB/VOLINA/VOLTAMP/ VINTEK

Executive Table of size 3150mm x 1050mm x 750mm with Pedestal made out of 19mm thick commercial board 3.5mm thick teak veneer of approved quality. Drawers 38mm Thick commercial board IS equivalent.It shall be made of two 19mm thick board to be covered with teak wood piping 3 nos of drawers running on telescopic channel. drawers to make locking arrengment and handles.

Back Storage Cabinet of colour matching with Table Executive , L - 1800 mm x W- 450 mm x Ht 750 mm Side storeage Unit top material & thickness - 25 mm Thickness flat single layer MDF Board of Grade SBG II of IS 12406 latest

Executive Chair/High Back with arm central tilt synchronic for Director , Arm metrial steel covered with wood cladding , seat material PU Foam covered with pure leather , Metreial of Fabric Back cover , leatherite.

Chair Visitor Revolving with arm central tilt synchronic Arm metrial propylene , seat material PU Foam covered with pure leather , Metreial of Fabric Back cover , leatherite

Conference Table 10 Seater with table tap of three layer prelaminated particle boards of Grade -II Type -II of IS : 12823/latest length - 3000mm x 1200 mm width, thickness of top 30 mm ( +/- 2 mm )

Discussion Table 8 seater Wooden with table tap of three layer prelaminated particle boards of Grade -II Type -II of IS : 12823/latest, L- 2400 x 900mm w x 75mm Ht, (Top thickness +/- 2mm )

Chiar Conference revolving with arm central tilt synchronic Pedestal Base : Chrome finish with 5 wheels , Arm Material Proypylene , seat material : PU foam covered with mesh fabric

Discussion Chair Wooden with seat DxWxH 500 mm x 600 mm 430 mm , material hot presed board , , Fabric back cover - leatherette padded with polyurethane foam

Sofa 2 Seater with leatherite cover

Sofa 1 Seater with leatherite cover

Table Centre with glass top 2 tier with other wood top of L- 1200 mm x W 600 mm, Height of 450mm (+/- 10 mm ), thickness of top metrial 15mm (+/- 2 mm )

Peg Table/Corner Table with glass top of length 762mm x 456mm (length x breath + ) , Hight of 460mm , Thickness of tap metrial 12 mm ( +/ - 2 mm)

Storage Table of Size 15' 3" x 1' 11"

Storage Table of Size 7' 10" x 2' 7"

Display Unit of Size 9' 11" x 1' 6"

devan enterprises

Sreyas Enterprises

TECKXPERT ENTERPRISES

ARCHANA CONSTRUCTION CO

M AND V ENTERPRISES