Repairing renovation extension and Construction of interior design, replacement of outside gate, renewing sanitary and water supply fittings including inside and outside painting etc. in Govt. Qtr. No. M-10 at New Minister Colony, Dispur

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick Granite of any colour and shade

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500x500 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & ........... fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 12 mm thick

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 800 x 1200 mm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick Granite of any colour and shade

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 10................. as per manufacturer's specification and direction of Engineerin- charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Varnishing with varnish of approved brand and manufacture : Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

110 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes

20 mm nominal dia Pipes

Supply, Fitting and fixing of wall paper of reputed make over finished wall after cleaning the surface etc. complete as directed.

Providing fitting fixing PVC panels for wall and ceiling(plain) with material installation including labour, carriage etc as directed and specified

Supplying, fitting and fixing Toughened Glass Partition with sliding arrangement with SS Steel frame upto a ht. of 2.108m made of 12mm thick Tinted Glass with all accessories etc.complete and as directed.

Providing and placing custom made Cabinet made of 12 mm thick MRB board (Green / Century/ Archid or equivalent) and finishing with 1 mm thick Laminate (Green / Centuary/Archid or equivalent) of approved shade fixed with necessary adhesive and make as per design along with Auto hydraulic hinges, SS handle 100mm as per direction of the department.

Supplying, fitting and fixing of 6 mm thick Corian Solid Surface (Romano Corian Solid Surface) for at all levels as specified and directed by the department.

Demolishing CC floors of various thickness including top layer and base coarse and disposal of debrises as directed for all levels.

Supplying & installation of Sanitary Fittings including all necessary fittings in the toilet (for both floors) of Minister's Quarter No.-M-10 at New Minister Colony, Dispur Guwahati-6 as Directed by the Department.

Supplying & installation of Modular Kitchen with cabinets laminated inside and outside , wire basket made of 304 grade stainless steel and wooden drawers made of European style sliders at Minister Colony as Directed by the Department.

Supplyin, fitting and fixing Minister's Double bed made by 19 mm plywood, 12 mm plywood with laminated finish including all materials as per design as specified and directed by the Department.

Supplyin, fitting and fixing of Double bed made by 19 mm plywood, 12 mm plywood with laminated finish including all materials as per design as specified and directed by the Department.

Supplying, fitting and fixing of design fiber sheet 8 mm thickness with labour charge with all accessories etc. as specified and directed by the department.

Supplying & installation of LOSIO SEPTIC TANK Code: LST – 1000 65 x 38 x 38 (inch) L X H X DiaSize of 78x45x45 (inch) including all necessary fittings as Directed by the Department.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch Each 85

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm) Each 287

6 Module (200mmX75mm) Each 333

8 Module (125mmX125mm) Each 383

12 Module (200mmX150mm)

1.28 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

Supplying., Installation, Testing and Commissioning of 1200mm sweep , BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades , 30 cm long down rod , 2 nos. canopies, shackle kit, safety rope, copper winding , Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.) , insulation resistance more than 2 mega ohm , suitable for 230 V, 50 Hz , single phase AC supply , earthing etc. complete as required.

Supplying, installation, testing and commission of the following indoor Decorative Recess mounted LED down lighter luminaries complete with all accessories such as ballasat, starter etc. in the false ceiling type Armstrong/Gypsum or similar mounting with necessary support with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (Phillips/Jaquar/LT/Wipro make) 6W Led Recessed Luminaire Ascentech

Supplying, installation, testing and commission of the following indoor Decorative Recess mounted LED down lighter luminaries of complete with all accessories such as ballasat, starter etc. in the false ceiling type Armstrong/Gypsum or similar mounting with necessary support with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (Phillips/Jaquar/LT/Wipro make) 18 W Led Recessed Luminaire Ascentech

Supplying, installation, testing and commission of the following indoor Decorative Recess mounted LED down lighter luminaries of complete with all accessories such as ballasat, starter etc. in the false ceiling type Armstrong/Gypsum or similar mounting with necessary support with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (Phillips/Jaquar/LT/Wipro make) 9W Led Recessed Luminaire Ascentech

Supplying, installation, testing and commission of the following indoor Decorative Recess mounted LED down lighter luminaries of complete with all accessories such as ballasat, starter etc. in the false ceiling type Armstrong/Gypsum or similar mounting with necessary support with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (Phillips/Jaquar/LT/Wipro make) 3W Led Recessed Luminaire Ascentech

Supplying, installation, testing and commission of the following indoor Decorative Recess mounted LED down lighter luminaries of complete with all accessories such as ballasat, starter etc. in the false ceiling type Armstrong/Gypsum or similar mounting with necessary support with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (Phillips/Jaquar/LT/Wipro make) 12W Led Recessed Luminaire Ascentech

Supplying, installation, testing & commissioning of Hi-Wall 1.5 Ton inverter 3 star rating non ducted split type Air Conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection up to 5 m between the room unit and out door unit (2 TON capacity Air Conditioner)

Supplying, installation, testing & commissioning of Hi-Wall 1.5 Ton inverter 3 star rating non ducted split type Air Conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection up to 5 m between the room unit and out door unit (1.5 TON capacity Air Conditioner)

Supplying, installation, testing & commissioning of Hi-Wall 1.5 Ton inverter 3 star rating non ducted split type Air Conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection up to 5 m between the room unit and out door unit (1 TON capacity Air Conditioner)

Supplying, installation, testing and commissioning of the following indoor Decorative LED Strip Light with all accessories such as ballasat, starter etc. in the false ceiling type Armstrong/Gypsum or similar mounting with necessary support with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (Phillips/Jaquar/LT/Wipro make) Incandescent Strip Lights

Supplying, installation, testing and commissioning of the following indoor Decorative Recess mounted LED down Lighter luminaries complete with all accessories such as ballasat, starter etc. in the false ceiling type Armstrong/Gypsum or similar mounting with necessary support with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (Phillips/Jaquar/LT/Wipro make) 20W/2000 Lumen 4000 K Led Tubelight

Supplying, installation, testing and commissioning of the following indoor Decorative Recess mounted LED down Lighter luminaries complete with all accessories such as ballasat, starter etc. in the false ceiling type Armstrong/Gypsum or similar mounting with necessary support with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (PHILLIPS 379932 Bronze Pendant Chandelier)

Supplying, installation, testing and commissioning of the following outdoor Decorative Recess mounted LED fixture, aluminium die casting, glass diffuser, black colour , Fireenze garden Light with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department (LED Garden Light

Supplying, installation, testing and commissioning of the following outdoor Decorative Recess mounted LED fixture, aluminium die casting, glass diffuser, black colour , Fireenze garden Light with 1.5 sq.mm P.V.C insulated S.C. copper conductor as required and as directed by the department Decorative LED Gate Light

Supplying and fitting fixing of of electric storage water heater (Geyser) of Crompton including necessary connection etc. as required complete and as directed by the Department 15 Ltr. Capacity Gyser

Supplying and fitting fixing of of electric storage water heater (Geyser) of Crompton including necessary connection etc. as required complete and as directed by the Department 25 Ltr. Capacity Gyser

Supplying and fitting fixing of propeller type at ventilating fan exhaust of Madhuban make including necessary connection as required complete and as directed by the department (Propeller type ac ventilating fan exhaust

Supplying with fitting and fxing of single phase Modular Motor Starter switch MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA) MK (WRAPAROUND/PLUS), ABB (CHEIRON) KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary cnnection as per direction of department. Overload Relay Range 16-25 Amps in 3 Module , Note (This item is not available in GEM Portal (Single Phase Modular A.C. Starter switch Range 16-25 Amps

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (Voltas or equivalent make) Digital Volt Meter 4.0 KVA Automatic Voltage stabilizer

Supplyinginstallation, testing and Commission of the following Wilo 1 HP SinglePhase Pressure Booster Pump HWJ 203 EM-24 necessary support with 1.5 sqw.mm P.V.C. insulated S.C. copper conductor as required and as directed by the department . Note (This item is not available in GEM Portal

Supplying and fitting fixing of Smart Television TV 50 inch LED Backlit LCD including necessary connection as required complete aand as directed by the Department. Smart Television Tv 50 inch LED Backlit LCD

Supplying and fitting fixing of washing machine Washer with dryer/Extractor Top Load Single Phase, 50 Hz Washing Machines includiing necessary connection as required complete and as directed by the Department. Washing machine Washer with Dryer/Extractor Top Load Single Phase, 50Hz Washing Machines

Supplying with fitting fixing of Panasonic 290L 3 star Frost Free Double Door Refrigerator including necessary connection as required complete and as directed by the Department Panasonic 290 L 3 Star Frost Free Double Door Refrigerator

Supplying with fitting fixing of SAMSUNG domestic microwave oven Watts (Samsung Microwave MC32J7035CK) including necessary connection as required complete and as directed by the Department Panasonic 290 L 3 Star Frost Free Double Door Refrigerator

Supplying with fitting fixing of Aquaguard Potable water purification system with inbuilt water cooler including necessary connection as required complete and as directed by the Department Aquaguard Potable water purification system with inbuilt water cooler. UV

Supplying with fitting fixing of VOLTRIQ Wall Mount Baffle Filter Decorative Kitchen Chinmney (VC 80 Flat Glass Motion 800) including necessary connection as required complete and as directed by the Department VOLTRIQ Wall Mount Baffle Filter Decorative Kitchen Chinmney (VC 80 Flat Glass Motion 800).

Art E Mide Construction Private Limited