Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.8 LAccepted-AOC 37 A 19 3 B MADHU NAGAR AGRA UP | AGRA | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | L2₹16.4 L+₹1.4 L (9.09%)Rejected-AOC PLOT NO 42 SURAJ NAGAR MANKAPUR RING ROAD NAGPUR 440013 | NAGPUR | NAGPUR | MAHARASHTRA | 440013 | L2 | Rejected-AOC NOT LOWEST TENDERER | |
| 3 | L3₹16.4 L+₹1.4 L (9.10%)Rejected-AOC NEAR SVN UNIVERSITY NARSINGHPUR ROAD SIRONJA SAUGOR MP 470228 | SAUGOR | SAGAR | MP | 470228 | L3 | Rejected-AOC NOT LOWEST TENDERER |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
11 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL SANDEEP BENIWAL, GE
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR MAINTENANCE OF STPs OF VARIOUS CAPACITY AND SWIMMING POOL AT VSN, NAGPUR
2023_MES_631246_1
8651
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
As per tender documents
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹36,000
30 Mar 2024
12 Feb 2024
18 Mar 2024
12 Feb 2024
11 Mar 2024
26 Feb 2024
Amount
STP 250 KLD (OMQ)
Material and labour for cleaning of equalisation sewage tank for 250 KLD STP (tank size 5.0x5.0 m x 5 m water depth ) total height of tank 5 mtr by cleaning entire internal surface by removing dirt, sludge etc and throw out to not exceeding of 50 mtr away from site with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including sludge using cutter pump and suction pump of suitable capacity and using acid & other suitable methods. Taking out air piping ,descaling , clear holes and refixing the same complete all as specified and directed .Charge. Note -1. Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump and ladder for man entering into the tank for removing of sludge from tank and de-watering , use of suitable chemical for descaling the air /water piping . 2. Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for taking out MBBR media from tank cleaned with suitable chemical for refilling after cleaning of MBBR tanks , materail and labour for cleaning of MBBR REACTOR TANK of (size 1.8x1.8 x5 m) for 250 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water. The cleaning of tank includes following . (a). Taking out MS/HDPE pipe with stainer , descaling the pipe and taking out stainer ,cleaning of stainer / repair by suitable welding or replacement of stainless steel bars / sheet as required at site. (b). Descaling of air grid and cleaning of holes for air piping. (c). Descaling of interconnecting MS piping . (d). Applying all piping inside MBBR tanks and inner surface of tanks with two coats of epoxy paint over coat of red oxide primer . Note:- Quoted rate shall deemed to be included cost for taking out cylindrical shaped floating PP rings, cleaning properly and refilling the same. 2) Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for taking out tube Settler media from tank cleaned with suitable chemical for refilling after cleaning, Material and labour for cleaning of TUBE SETTLER TANK of (size 3.8m x 2.2m x 2.7m ) for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water. Cleaning of channels and applying the channels inside tube setteler tank and painting inner wall surface of tanks with two coats of Epoxy Paint over a coat of red oxide primer . Note -Quoted rates shall deemed to be included cost for fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering. 2) Painting with cement paint internal surface and outer surface and also write date of cleaning in proper format
Material and labour for cleaning of HYPO SOLUTION TANK/ Chlorine contact tank for 250 KLD , size of tank ( 4m x 3.0m x 1.5m) by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water as specified and directed by Engineer-In-Charge . Note - 1) Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement. 2) Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for cleaning of TREATED WATER TANK for 250 KLD , (size of tank 4m x 6.25 mx2.2m ) by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface and painting inner wall surface of tanks with two coats of white wash complete all as specified and directed. Note - 1) Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering.
Material and labour for cleaning of Sludge dryer TANK / for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with fresh water and clean entire surface repeatedly with fresh water and draining out soiled waste material including using suitable equipment /tools surface complete and applying cement based paint white colour 2 coats all as specified and directed all as specified and directed by Engineer-In-Charge. Note: The waste shall be collected from sludge dryer tank and handover to department without any extra cost. 2) Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Painting work: Material and labour for painting of the following Installed machineries at 250 KLD STP scrapping existing paint and spraying two coat of synthetic enamel paint over one coat of primer as per colour coading using spray gun and writing SM/MES No. with white paint of Asian/Berger/ Nerolac manufacturer complete all as directed Pump Set with motor :- 06 Nos. Sand Filter :- 01 Nos. ACF-01Nos Air Blower with motor -02 Nos Sewage lifting pump :- 02 No. LT Panel/Control panel-01 nos MBBR-02 Nos, Tube Settler - 1 Nos All the suction/discharge pipe lines complete length for 250 KLD stp as per colour coding.
Material and labour for cleaning of equalisation sewage tank for 450 KLD STP (tank size 13.9m x 5.5 m height water depth ) (effective volume 378 cum) entire internal surface by removing dirt, sludge etc and throw out to not exceeding of 50 mtr from site with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using sludge cutter pump and suction pump suitable capacity using acid and other suitable methods complete in all in as specified and directed. Note -1. Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump and ladder for man entering into the tank for removing of sludge from tank and de-watering , use of suitable chemical for descaling the air /water piping . 2. Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for cleaning of MBBR REACTOR TANK sewage tank capacity (volume 125m3) free board 800 mm size of tank 5.50m x 5m swd for 450 KLD STP entire internal surface by removing sludge/dirt, old unserviceable floating media and cleaning all floating media with fresh water. Dismatling of old ms pipe 100 from MBBR tank and re fixing sewage pipe from MBBR to equalisation tank,cleaning inside and outside dia of pipe using pressure jet machine including dismantling, cleaning, painting with black colour synthetic enamel paint in two coat and re fixing the same. Taking out air out going pipe 40 mm from air blower to sewage equalization and MBBR tanks and applying bleaching power into the wall surface, cleaning entire surface with fresh water repeatedly and draining out soiled waste water including using pressure jet pump and suction pump of suitable capacity complete all as specified and directed . Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be the contractor's own arrangement.2) Painting with cement paint internal surface and outer surface and also write date of cleaning in proper format Note:- Floating PP rings ,cylindrical shaped taken down & cleaning after refilling the same.
Material and labour for cleaning of TUBE SETTLER TANK/ sewage tank capacity size of tank 10.0 mx2.7 m swd free board 300 mm for 450 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump of suitable capacity using acid and other suitable methods before filling as required at site . Note -1. Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump and ladder for man entering into the tank for removing of sludge from tank and de-watering , use of suitable chemical for descaling the air /water piping . 2. Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for cleaning of HYPO SOLUTION TANK/Chlorine contact tank for 450 KLD , size of tank 6m dia x 2.0 m, free board 300mm 450 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete in all in as specified and directed.using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge for the following Note - 1) Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering. 2. Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for cleaning of TREATED WATER TANK for 450 KLD , size of tank 10m dia x 4.0 m , free board 300mm ,450 KLD STP entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface using acid and other suitable methods before filling as required at site complete all as specified and directed. Note - 1) Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering. 2. Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for cleaning of SLUDGE HOLDING TANK for 450 KLD by dewatering and taking out all the sludge deposited in tank also cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump all as specified and directed by engineer-In-Charge for the following Note - Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement.2) Painting with cement paint internal surface and outer surface and also write date of cleaning in proper format
Painting work: Material and labour for painting of the following Installed machineries at 250 KLD STP scrapping existing paint and spraying two coat of synthetic enamel paint over one coat of primer as per colour coading using spray gun and writting SM/MES No. with white paint of Asian/Berger/Nerolac manufacturer paint complete all as specified and directed. Pump Set with motor :- 06 Nos. Sand Filter :- 01 Nos. ACF-01Nos Air Blower with motor -02 Nos submersible pump :- 02 No. LT panel/ control panel-02 nos All the suction/discharge pipe lines complete length for 450 kld stp as per colour coding.
Material and labour for cleaning of swimming pool (size 25mx13.5m) by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface using acid and other suitable methods before filling as required at site complete all as specified and directed Note -Quoted rates shall demmed to be included cost for filling the swimming pool as per requirement.
Material and labour for cleaning of make up water tank for swimming pool using acid and other suitable methods before filling as required at site all as specified and directed.
Material and labour for cleaning of baby pool tank for swimming pool using acid and other suitable methods before filling as required at site all as specified and directed.
STP 250 KLD (MAP)
Material and labour for cleaning of equalisation sewage tank for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump of suitable capacity complete in all in as specified and directed. Note -1. Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump and ladder for man entering into the tank for removing of sludge from tank and de-watering , use of suitable chemical for descaling the air /water piping . 2. Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for cleaning of MBBR REACTOR TANK/TUBE SETTLER TANK/ sewage tank for 250 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pumpsuitable capacity complete . Note - 1) Quoted rates shall deemed to be included cost for supplying fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement. 2) Quoted rates shall deemed to be included cost for painting internal & outer surfaces with cement paint and also writing date of cleaning in proper format.
Material and labour for cleaning of HYPO SOLUTION TANK/TREATED WATER TANK/ sewage tank for 250 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete in all in as specified and directed. Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement.2) Painting with cement paint internal surface and outer surface and also write date of cleaning in proper format
Material and labour for cleaning of Sludge dryer TANK for 250 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with fresh water and clean entire surface repeatedly with fresh water and draining out soiled waste material including using suitable equipment /tools surface complete and applying cement based paint white colour 2 coats all as specified and directed all as specified and directed by Engineer-In-Charge Note: The waste shall be collected from sludge dryer tank and handover to department without any extra cost.2) Painting with cement paint internal surface and outer surface and also write date of cleaning in proper format
Painting work: Material and labour for painting of the following Installed machineries at 250 KLD STP scrapping existing paint and spraying two coat of synthetic enamel paint over one coat of primer as per colour coading using spray gun and writen SM/MES No. with white paint of Asian/Berger/ Nerolac manufacturer paint all as directed Pump Set with motor :- 06 Nos. Sand Filter :- 01 Nos. ACF-01Nos Air Blower -02 Nos Suction Sweeper :- 01 No. LT Panel/Control panel All the suction/discharge pipe lines complete length as per colour coding.
Testing of treated water sample collected from vayusena nagar and testing report required through reputed laboratory as per BIS -10500:2012 for sewage treated water are required folowing test: Followings parameters for waste treated water should be maintained by the contractor of STP plant and accordingly dosing shall be done PH 6.5-8.5 Dissolved Phosphorous MG/L TDS MG/L Nitrate Nitrogen as N MG/L Turbidity NTU Helminthic Eggs Count/L TSS MG/L Colour Temperature Centigrade Odour Oil & Grease MG/L Helminth Egg Res. Chlorine MG/L Sulphate MG/L Total Kjeldhal Nitrogen MG/L Chlorides MG/L BOD MG/L Acidity MG/L COD MG/L Note: Testing of sample shall be done quaterly basis
Material and labour for rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and earth lead, suction and delivery pipes, shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of startor and cleaning the slots, core assembly, rewinding to startor with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete all as specified and as directed for the following capacity: - (a) 3 H P
Taking out old unserviceable MS pipe, fabricate & fixing of MS ERW pipe, nominal dia 50mm-125 mm as per IS 3589 (1981), heavy grade, including MS flanges , fixing of butterfly / sluice valve including necessary nuts, bolts and rubber gasket etc, complete all as specified and directed. NOTE:- The quoted rate shall deemed to be included cost for welding work ,bend to making header for STPs or fixing in the existing pipe.
Supply and fixing in repair stainless steel bourdon type pressure gauge dial type 0 -25 Kg/cm2 range with a stainless steel body complete including all necessary GI pipe connection fittings / cutting / jointing all as specified and directed.
Taking out unservicable, Supply, install , testing & commissioning flow meter electromagnetic type , average flow 2.0 mld of model no FSG-10 make FLOW STAR ENGINEERING PVT LTD
Taking out unserviceable ball valve & supply and fix ball valve 1/2" size in CI Body including all accessories all as specified and directed.
Taking out unserviceable butter fly valve of size 50 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally completeall as specified and as directed.
All as per item No 31 above but of size 65 mm bore
All as per item No 31 above but of size 80 mm bore
Supply only media for MBBR, type of media floating PP , cylindrical shaped , specific gravity 0-90 -0-95 gms/cm3 , colour black for 250 kld completeall as specified and as directed. Note: Sample available at AGE E/M office of GE (AF) Nagpur.
Taking out media from pressure filter of swimming pool of capacity 15000 gallon per hours, cleaning chambers and removing exsisting damaged strainer and refilling the media after seperating as per size including testing for leakage complete all as specified and as directed. Note :- i) Additional media required and new strainer/laterals will be measured and paid seperately as supply only. ii) Cleaning to be done by using chemical as per OEM direction only.
Taking out media from pressure filter of STPs of different capacity cleaning chambers and refilling the media as per size including testing for leakage complete all as specified and as directed. Note :- i) Additional media required will be measured and paid seperately as supply only. ii) Cleaning to be done by using chemical as per OEM direction only.
Supply only filter media of good quality 16/32" Mesh size 40-60mm
All as per item No 37 above but 1/8" Mesh size 30-40 mm
All as per item No 37 above but 1/4" Mesh size 15-25 mm
All as per item No 37 above but 1/2" Mesh size 5-8 mm
Supply only filter media fine sand.
Material and labour for opening air blower set twin lobe type of capacity 270 m3/hr with head of 0.65 mmwc of make USHA , blower & motor coupling after isolating the electric and air pipe connections opening the air compressor set for repair/overhauling & servicing of compressor , proper alignment of shaft etc including replacing the items with new items given below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary lath works complete all as specified and directed . Note :- Major Spares Parts will be measured & paid seperatly.as supply only
Supply only spare parts for Air blower follows:-
a) Supply only blower bearing of suitable size 270 m3/hr with head of 0.65 mmwc of air blower compresser of make Usha.
b) Supply only Blower V Belt of size "B1338 lp/b 51
c)Supply only Blower Pulley of size Air blower cap 270 m3/hr
d)Supply only Blower Oil Seal & Packing
e)Supply only Blower sucton filter suitable for air blower cap 270 m3/hr
f)Supply and fill blower oil No. 90 Servo / Castrol
Testing of potable water sample collected from Vayusena Nagar Nagpur and testing shall be carried out from NABL acredited lab as per BIS - 10500:2012 parameters for drinking water along with test reports complete all as specified and directed.
Material and labour for PH and chlorine testing kit (2 in 1) with coloured sample with all testing fitments and OT solution in rexene finished box complete all as specified and directed.
Material and labour for PH Corrector (-ve) complete all as specified and directed.
Supply and making liquid form suitable for dosing machine and pore to dosing plant of Trichloroisocyanuric Acid (90%) (C3CI3N303) Chlorine Granuals (90%) Size 5-8 Mesh Appearance : White Granuals Effective Chlorine : 90%,pH : 2.7 to 3.3 Note: 1) The quoted rate shall deemed to be incuded cost for mixing & dosing as per directions.
Supply only Sodium hypochloride solution (NAOCL) in HDPE container complete all as specified and directed.
Material and labour for Algaecide including HDPE container of capacity 50 Kg complete all as specified and directed.
Supply and mixing copper sulphate (BLUE STONE) CuSO4 (ISI marked) complete all as specified and directed. Note: The quoted rate shall deemed to be incuded cost for mixing & dosing as per directions.
Supply and making liquid form and pore to dosing plant alum(AL2O3) superior grade with aluminium percentage not less than 17% insolube matter percentage maximum 0.30 % Ph of 5% solution should not be less than 2.80 and iron percentage by maximum 0.01% Note: he quoted rate shall deemed to be incuded cost for mixing & dosing as per directions.
Painting work: Material and labour for painting of the following Installed machineries at 250 KLD STP scrapping existing paint and spraying two coat of synthetic enamel paint over one coat of primer as per colour coading using spray gun and writen SM/MES No. with white paint of Asian/Berger/ Nerolac manufacturer paint all as directed Pump Set :- 02 Nos. Pressure Filter :- 02 Nos. Dosing Pumps :- 03 Nos. including dosing tanks Suction Sweeper :- 01 No. All the suction/discharge pipe lines complete length for 450 kld stp as per colour coding.
Supply and fixing in replacement water distributor at top of the pressure filter at swimming pool made of 150 mm heavy M.S. pipe with flange and 40 mm heavy branches with 10mm holes all as specified and directed. Note :- The distributor shall be fabricated as per existing type and size.
Material and labour for internal epoxy coating paint of filter vessel with epoxy paint skilled labour mask and air ventilation equipment in spray machine used swimming pool filters in two numbers complete all as specified and directed by Engr-in -charge Make Asian/Berger/Nerolac
Taking out unserviceable butter fly valve of size 150 mm bore and supply and fixing new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel disc & stem, lever operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally all as specified and as directed
Material and labour for opening suction sweeper of swimming pool having discharge of 2 LPS of 20 Mtr. head complete with suction head, brush, flexible hose pipe & manual pulling rope, suction pipe with inlet valve, nozzles including electrical connections. isolating the electric and earth lead connections opening the suction sweeper set for repair/overhauling & proper alignment etc including replacing the items with new items given vide item below, reassemblying the suction sweeper greasing connecting, testing and commissioning complete including necessary works all as specified
Supply only spare parts for pump set for fixing against item No.61 above.
(a) Pump Bearing
(b) Pump Shaft Sleev, Gland Packng & Oil Seal
(c) shaft
(d) Supply only flexible pipe 1/2 inchs dia for priming to pump
Taking down U/s & Supply and installation , testing , commissioning of hydrochloride solution dosing pump capable for 0-20 lph, 0.37 kw for maintaining free chlorine @7.0 ppm for desinfection complete with suction and discharge pipe , self priming foot valve , adapter including all accessories such as electrical/ control connection complete Make TEKNA EVO Code AKL 603NHP0004 of Seko make
Dua Construction
M/S JAINENDRA KUMAR JAIN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .