Mallasamudram TP 15th FC 25-26 Ist Instalment Renovation of Community Toilet

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Cement concrete including all labour charges etc. complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Brick work in cement morter under 3m height etc. complete complying with standard specification.

Earthwork excavation in all soils and subsoils except hard rock requiring blasting with initial lead and lift as initial lead of 10.0 m and lift of 2.00 m including re-filling the sides of foundation in layer of 15cm. thick watering ramming depositing the surplus earth in the premises as directed by the departmental officers etc., complete complying with standard specification.

Cement concrete 1:4:8 ( One cement four m. sand and eight aggregate ) using 40mm ISS size hard broken granite metal for foundation and flooring including de-watering wherever necessary and laid in layers not more than 15cm. thick to required thickness , including cost and conveyance of materials to work site & labour charges complete with standard specifications

Supplying fabricating and placing in position of steel rods using TMT Steel ISI including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications.

Supplying and erecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over (silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification .

Plain cement concrete in 1:2:4 [one cement and two M.sand and four the aggregate ] using 20 mm size IRC grade machine crushed chips and excluding cost of reinforcement and centering works and including the cost of mixing, laying , curing etc.,complete complying with standard specification .

Reinforced cement concrete in 1:1½:3 [one cement and one and half sand and four the aggregate ] using 20 mm size IRC grade machine crushed chips and excluding cost of reinforcement and centering works and including the cost of mixing, laying , curing etc.,complete complying with standard specification .

Brick work In CM 1:5 mix using best country bricks of size 23cm x 11.50cm x 5cm having 350kg/cm2 compressive strength and 15% or less water absorbentin the period of 24hours immersement and confirming to ISI specifications.and using the screened sand and all the materials should be approved by the competent technical authorities etc complete complying with standard specification.

Plastering with cement mortar 1:3 ( one cement and Three M.sand) 10 mm thick mixed with water proofing compound at 2% by the weight of cement used etc., complete complying with standard specifications.

Plastering with CM 1:5 (One cement and Five M.sand) mix of 12mm thick including finishing cost and conveyance of all materials to work site and all labour charges watering, curing and and all other incidental charges etc., complete complying with standard specifications.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection, dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and laying and jointing of PVC pipes ( 6kg / Sqcm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting, fixing to PVC Specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - wood plugs, PVC clamps and screws, making holes on the wall or drilling holes in roof and making good the dismantled portion to original condition with necessary brick scaffolding charges .a). 20mm Dia. GI Pipe 'B' class

20mm OD PVC Tap

b). 32mm OD. PVC Pipe 10Ksc

25mm OD PVC Bend

25mm OD PVC Elbow

Dadooing the wall glazed tiles of size 305mm x 200mm x 6mm size of approved make and quality and colour 1set in cement mortor 1:2 (one cement and two sand) over 10mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with plain/design Antiskirt ceramic tiles (colour shade as directed) of size 305mm x 305mm x 6mm in all floors over a base layer of cement mortor 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement

Supplying and fabrication and fixing in position of anodised natural colour matt fininsh Door in all floors with following sizes. All the two shutters with slinging entering and made with UPVC (ultra Polyvinyl Chloride ) section for outer frames as shown below with necessary accessories such rubber beading.clips, handle and fixing 5 mm thick clear sheet glass including all required for fabrication etc., complete. Necessary dismantling making holes in RCC columns, beams, mansory wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers. (All materials should be got approved by the Executive Engineer before fixing in position).

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc, in all floor with two coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with Standard Specification.

Supply and run of 2 of 1.5sq.mm.(22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14-SWGC wire with painting of suitable colour SD.54.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colour for open PVC light point / fan point (For electronic regulator) (6points per coil) SD.20

Supply of country wodden meter board size 60 X 45 cm,x 2.5 cm., thick ,etc., Complete.

Supply and fixing of 1000 Capacity HDPE Tank etc., Complete.

Supply of 16A Porcelin Base Fuse Unit with ISI mark, etc., complete.

Supply and fixing of 32A - DP MCB Isolater etc., Complete.

Supply and Fixing of Following LED Bulb's with ISI mark, etc., complete. 11-W LED Bulb

V Infra Construction (BID ID -1438242)