Repairs and Renovation to Examination Hall 1 and Toilet Block on 2nd Floor of Faculty Block at GMC Bambolim

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

15mm cement plaster 1: 3 (1 cement : 3 fine sand) on the rough side of single or half brick wall.

Providing and applying white cement based putty of average thickness 1.00 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade

Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) fixing with clip in tiles into spring 'T' with :;b) GI Metal Ceiling Clip in plain Beveled edge global white colour tiles of size 600x600 and 0.4-0.5 mm thick with 25 mm height made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5 electro statically polyester powder coated of thickness 60 microns (minimum) including factory painted after bending and perforation.

Providing and fixing of aluminium windows with three tracks and three shutters sliding windows with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock 6mm plain clear glass with EPDM beading etc.

Providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in -charge: Adjustable louvered windows.;Plain glass

Providing and fixing anodised aluminium single or double leaf door shutters with heavy sections as specified.

Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section

Proving and fixing white vitreous china water closet squating (European type w. c. pan) with seat and lid C. P. brass hinges and rubber buffers 10 lts. High level P. V.C.. flushing cistern (of approved make ) with fittings rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete cutting and making good the walls ad floors where required.;W. C. pan with white plastic seat and lid.