Construction of boundary wall at SCADA building Panama Chowk Jammu.

Amount

Clearing jungle incld. Uprooting of rank vegetation, grass, brushwood, trees and saplings etc.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width but not exceeding 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand :8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement: 3coarse sand :6 graded stone aggregate 20mm nominal size) Crushed (including carriage & material)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Disposal of excavated earth obtained from cutting through mechanical transport lead beyond 50m upto 5 km

Centring and shuttering including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay F.P.S.(non-modular) bricks of class designation 75 in foundation and plinth in Cement mortar 1:5 ( 1 cement: 5 fine sand) (including carriage & material)

Cooping 40mm on wall (1:2:4) mix

15mm Cement plaster on both fair & rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) (including carriage & material)

Providing and laying 18mm thick gang saw cut mirror polished Granite in risers and steps laid on 12mm cement mortar in mix 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Extra for providing edge moulding including machine polishing

M.S. Steel works welded in built up sections/framed work including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer using a structural steel etc as required in Gates etc. (including carriage & material)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (including carriage & material)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth 1.1.5:3 (1 cement : 1.5 coarse sand : 3level.graded stone aggregate 20mm nominal size) (including carriage & material)

M/S GULZAR AHMAD MAGRAY

M/S SHEERAZ CONSTRUCTIONS