Construction of New Building for newly formed District Police Office Building with development works at Chengalpattu in Chengalpattu District

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5)Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

25) M.S.Holdfast

31) Weathering course

37.1) White washing 3 coats (slaked)

39) M.s Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

45) Stucco plastering 12 mm tk.

46) S & F 20 mm dia Alu. Hanger Rod

47) S & F Alu Towel rail 75 cm long

48) S & F 5 pin Coat stand

49) S & F chromium plated 8 guage Picture Hook

50.4). Providing Tree guard

52) PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

C.I. Steps ( 5 kg)

55.2) Flat Back Urinal

Electrical arrangements 69) 15 Amp. Power plug

72) Box type Fibre Fan hook

74) Charges for fixing of "Fan"

76) 8 SWG wire

77.3) S&F of TV/Telephone line Socket

77.4) S&F of 20mm dia PVC pipe for TV/Telephone line

78) Earthing Station IS3043 (Type I)

86) Anti termite treatment

87) ELCB Single phase

112) S & F of Exsaust Fan 300 mm dia

ANNEXURE 1.3) Earth work excavation and depositing on bank withinitial a.In Soft Disintegrated Rock, Laterite, soft rock or kankar, not requiring blasting.

d.In hard rock including blasting, removal and stacking.

1.5.1) Earth work excavation for Open foundation (excluding refilling) c) 3m to 4 m depth

d) 4m to 5m depth

e) 5 to 6m depth

2.1.1) Supplying and filling in foundation and basement with filling Manufaturing Crushed Stone Sand

2.6) supplying and filling with 40mm size broken stone jelly in foundation and basement

2.7) supplying and filling with 20mm size broken brick jelly in foundation and basement

2.15) Supplying and filling stone dust

2.18) Supplying and filling quarry rubbish

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works

3.3.3) P.C.C. 1:8:16 using 20 mm broken brick jelly

3.8.1) P.C.C. 1:4:8 using 40 mm Hard broken stone jelly

3.8.3) P.C.C. 1:3:6 for foundation & basement using 20mm metal

6.2.2) Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 23 x 11 x 7 cm

7.3.1) Supplying and fixing 300mm wide PVC EXPANSION JOINTin the 20mm expansion

8.2.3.2) Standardised concrete Mix M20 Grade Concrete a. In Foundation and basement

b. Ground floor/ stilt floor

c. In First Floor

d. In Second Floor

e. In Third floor

f.In fourth floor

g. In Fifth Floor

9.2.2) Brick work in C.M. 1:6 using Fly ash bricks of size 23 x 11 x 7 cm a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

d. In Fifth Floor

10.2.2) Brick partition work in C.M. 1:4 using Fly ash bricks of size 23 x 11 x 7 cm , 110 mm tk (B.P.) a. Foundation & basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

11.2.2) Brick work in C.M. 1:4 using using Fly ash burnt bricks bricks of size 23 x 11 x 7 cm , 70 mm tk (B.P.) b. In First Floor

c. In Second Floor

d. In Third Floor

14.I.1) Precast Cupboard slab 20 mm tk.using standardised concrete mix M20 b. In First floor

c. In Second floor

d. In Third floor

14.II.1) Precast cupboard slab 40 mm tkusing standardised concrete mix M20 a. In Foundation & basement

c. In First floor

d. In Second floor

e. In Third floor

15.1) Cuddappa slab 20 mm tk.for C/B slab. b. In First floor

c. In Second floor

d. In Third floor

18.1) Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

e.Circular column

f.Curved surface

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

21.5.1.3)Supplying and fixing of solid core flush door shutter of thickness 35mm c) door size 1.50 m x 2.40 (Double leaf)

e). door size 1.200 m x 2.400 (double Leaf)

21.5.6.1))Supplying and fixing of solid core flush door shutter of thickness 35mm a) door size 1.00 m x 2.400 (Single Leaf)

b) door size 0.900 m x 2.100 (Single Leaf)

c) door size 0.900 m x 2.400 (Single Leaf)

j. Door size 0.75m x 2.4m (Single leaf)

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

23.5.1) S & F of Hydraulic door Closer(Heavy)

22.6.3) Providing teakwood glazed french window shutters and 5.5mm thick ground or frosted glass for panels a).2100 x 2600mm

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler)

29.8.2) Acid proof Floor ceramic tiles using Grout (Tile Joint Filler)

29.8.4) S & F of Porselona (PGVT) Tiles (Tile Joint Filler).

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

31.5.1) Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles with base concrete

33.2.1) Plastering in C.M. 1:5, 12 mm tk.

34.2.1) Plastering in C.M. 1:4, 12 mm tk.

35.2.1) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.

36.1)) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.6) One coat white cement for new walls and other similar works.

38.8) Two coat of OBD over one coat white cement for inner walls

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M20)

b) Augering 30cm dia

44.6) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

45.2.1) Providing Rain water Harvesting well ring of Circular shape of 90mm dia, 60cm depth using Standardised Mix design M20

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.3) Supply and planting avenue trees

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

50.6) Precast slab 50 mm tk.in C.C. 1:3:6 with fibre

52.4) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

52.9) M.S clamp set

53.3.1) Supplying and fixing of PVC mould CI Steps for Sump/Manhole

53.4) S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1) S & F of 15mm dia half turn CP long body tap

54.2.1) S & F of 15mm dia half turn CP short body tap

56.3.1) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.1) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) S & F of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Gully Trap using Fly ash burnt bricks bricks of size 23 x 11 x 7 cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1) PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.1) PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.( Ordinary) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

70.5.2) Supply and fixing of 4' 18 watts LED Tube Light

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5) Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7) Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.5) 100 Amps Porcelain Fuse Unit (500V)

79.6) Supplying and fixing 3 nos of 200 amps 500 volts grade porcelain fuse unit ISI

80.4) Supplying and fixing 1 No of 450 x 375 x 20 mm thick TW plank

82.3.1) Supply, fiing of 30W LED street light etc.,

82.3.4) Supplying and fixing of 60 W LED Street light fitting (MAKE BAJAJ/equvelant) including labour charges for fixing of LED steet light fitting etc all complete

82.3.5) 120W LED STREET LIGHT FITTING The luminaire comes with pressure die cast aluminium

84.3) Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

85.1) Supply of G.I pipe 40mm dia 'B' Class

87.1) Supplying and delivery of Three phase ELCB/RCCB

90.2) Providing additional strutting to centering of plain surface. a.3.6 to 5.6m height

91.2.2) TW double leaves shutter with Brass Fittings a. 1500X2400mm. (Double leaves) with Brass fittings

93.1) Plastering with CM 1:3, 12mm with WPC

97.2.1) Supply and fixing of Colour matt finish door 15 micron single leaves door Aluminium Door a.1000 x 2100mm

97.5.3) S & F of Aluminium Partition wall(1/3 Glass 5.5mm & 2/3 Noveapan sheet 12mm thick

98.2.1) Supplying and fixing of best INDIAN TEAK WOOD SINGLE LEAVES PANELED DOOR SHUTTERS (Brass furniture fittings) a.1200 x 2400mm

98.5.3) Supplying and fixing of best INDIAN TEAK WOOD DOUBLE LEAVES PANELED DOOR SHUTTERS (Brass furniture fittings) a. 2000 X 2700mm

98.5.4) Supplying and fixing of best INDIAN TEAK WOOD DOUBLE LEAVES PANELED DOOR SHUTTERS (Brass furniture fittings) b.1500 x 2400mm

108.6.2) Supply & run of 4 x 6 Sq.mm of PVC insulated unsheethed single core FRLS copper cable of 1100 V grade in suitable PVC rigid pipes

108.7.1) Supply & run of 4 x 10 Sq.mm of PVC insulated unsheethed single core FRLS copper cable of 1100 V grade partly in new PVC rigid pipes

113.1) Supplying and fixing of push and pull type steel rolling shutters of best approved quality with gear operated type b) Gear oprated type ( from 8 sqm to 12 sqm area )

113.2) Supplying and Fixing of Rolling shutters of all sizes (under 8m2)

149.2.1) Supplying and fixing of 7 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm)

Cabling and end termination 151.3.1) Supply and laying of PVC /LTUG aluminium conductor 1.1KV grade armoured ,MV cable (Below floor) a )3.5 C x 120 sq mm aluminium cable

b) 3 1/2 x 185 sqmm aluminium cable

c)3 .5 core 35 Sqm LTUG Cable

d) 2 wires of 6 sqmm LTUG cable PVC armourd copper cable

External Electrical Arrangements Main Panel 155.1) Supply and erection of 250 Amps capacity floor mounting panel board (Cubical type)

155.2)Supply and erection of 250Amps capacity floor mounting panel board (Cubical type)

155.3) Supply and erection of 125 Amps capacity floor mounting panel board (Cubical type)

155.4) Design, fabrication, supply and erection of following sub switch boards cubicle type floor mounting arrangement

161.1)supplying and delivery of following pvc armoured copper cable (ltug) a)4sq.mm PVC armoured copper cable (LTUG)

b) 1.5sq.mm PVC aroured copper cable (LTUG)

161.1.1) Supply and fixing the following copper Crimping Lugs a) 3.5 Core 25 Sqmm Cable

161.1.4) Supply and fixing of brass cable gland for XLPE armoured LTUG cable for following sizes with earth connection. a) 3 1/2 x 120 sqmm brass cable gland

.b) 3 1/2 x 185 sqmm brass cable gland

c) 3 1/2 x 70 sqmm brass cable gland

d) 3 1/2 C x 25 sqmm brass cable gland

e) 4 C x 16 sqmm brass cable gland

f) 4 C x 10 sqmm brass cable gland

g) 2 C x 10 sqmm brass cable gland

161.1.4.1) Supply and fixing the following copper Cable Gland suitalbe for the UG cable etc to complete. a) 3.5 Core 25 Sqmm Cable

161.4) Supply and providing cable end termination of following sizes of XLPE armoured LTUG Aluminium cable a) 3.5 x 120 sqmm cable end termination

.b) 3 1/2 x 185 sqmm cable end termination

c) 3 1/2 x 70 sqmm cable end termination

d) 3 1/2 C x 25 sqmm cable end termination

e) 4 C x 16 sqmm cable end termination

f) 4 C x 10 sqmm cable end termination

g) 2 C x 10 sqmm cable end termination

162.2.1) Supply and clamping of the follwing sizes of PVC / Aluminium Armoured LTUG cable a) 3.5c x 70 sq.mm.

b) 3 1/2 C x 25 sqmm aluminium cable

c) 4 C x 16 sqmm aluminium cable

d) 4C x 10 sqmm aluminium cable

e) 2 C x 10 sqmm aluminium cable

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS 8034 without Panel Board of 3H.P capacity

171.2.9) Supply and Delivery of Openwell submersible motor Pumpset with ISI mark IS 8034 without Panel Board 200 LPM X 40

175.1.1) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB distribution board

MISCELLANEOUS ITEMS 175.1.6) Supplying, Fixing and testing and commissioning of MCCB / MCB / Isolator in a sheet steel enclosure on surface / recess 40 A TPN 10 KA MCB

10/20/32A DP MCB

63A TPN - 10 KVA MCB

175.2.3) Vertical TPN Distribution Boards (with MCCB Incomer); b. 6 Way, MCCB + 18 Modules

179) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe

179.1) Supply and fixing of 25 mm x 3 mm tin coated copper flat on wall

179.2) Providing and fixing 25mm x 6mm copper strip on surface

180) Supply and run of 2 of No.8 tin coated copper for earth connections from the earth bit to the earth machine room-

202.1) Supplying and laying of following GI pipe B class with ISI mark a.) 100mm dia GI pipe

207.3.1) Plastic Emulsion PAINT including primer for outer walls

213.1) Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement a.600 x 600mm Rectangular

b.600mm diameter

b. 300mm x 300mm

213.2) Supplying and delivery of 9" dia MS Borewell cover for pumpset

255) Providing Cornice Work for Gyp Board False Ceiling 150mm wide PWD Sor P.No. 612020-2021

255.1.2) Supplying and fixing of spot light (MASTER LED 65-50 WA 2700 KMRI636D IND)

255.2) Supply and fixing of 9 watts LED bulb

b)Supply and fixing of 12 watts LED bulb

255.6) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

255.6.5) Supply and fixing of WT bulk head fitting suitable for 60W incandescent lamp with guard.

255.7.2) Supply and fixing of AC / DC 76 mm Buzzer / call bell

255.8.3) Supplying and fixing of 2x2 LED LIGHT 24 W recessed

292.2) supply and delivery of sludge tranfer pumps for pumping the sludge fromclarifier tank to aeration tank

292.2.4) supply and delivery of treated water pumps

293.3) supply and delivery of filter feed pumps for feeding the clarified water from clarified water storage tank to filters

295.2) supply and delivery of 2 HP high speed floating aerator consists of motor 2 HP. 1440RMP flange type,

295.3) supplying and delivery of fixed aerators consisting of inverted cone type impeller fabricated with ms plate with two coats of epoxy paint.

296.2) supplying and delivery of clarisettler 3.0m dia central driven type bridge 1m width and 1m height mild steel fabricated

297.3) supplying and delivery of pressure sand filter of capacity 12.5m3per hour to filter the suspended matter escaped from the clarifier

297.4) supplying and delivery of activated carbon filter of capacity 12.5m3per hour to fiter the suspended matter

298.1.2) supplying of chemical dosing system with following specification electronic diaphgram pump and 50 liters capacity

299.2) Erection and commissioning of stp including erection of all mechanical equipments, control devices

299.3) plant opration and maintance including cost of chemicals like hypo cholrite

301.1) supplying and delivery of electrical control panel board for the stp with all inter connection wiring toall starters as per relavent specifications.

344.2) S&F of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.1.1) Concrete Designer Tiles flooring

361.5) Vitrified Tiles flooring (Ivory)

367) Providing wooden Melamine polish for new wood work

343.2.2) Supplying and laying of 0.47 thickness Galvanium sheet

366.1.1) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser

366.3.1) Supplying and fixing of stainless steel hand rails

366.4.1) Supply and delivery of dia 50mm and 25mm MS fabricated pipe Handrail height of 1.0 mt with SS base plate

379.4.4.1) S & F of Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4'x2' and above 18mm to 20mm thick

379.8.2.1) Granite Tiles flooring (Ruby red) using 2'x1', 10mm tk

379.8.8) Designing the Semi Unitised Structural Glazing System with open groove joint

379.8.9) Providing and fixing of Aluminium Composite Panel (ACP)

379.9.1) Supplying and fixing of rounded column guard of size 500x75x12mm tk

448.2) Providing PVC Tee with end cap

451.3.2)Supplying and fixing of the following C.P water supply fittings of approved make (ISI) and qualit a) Supply and Fixing of CP two way bib cock with health faucet

b) Supply and fixing of CP Shower Arm with Overhead shower rose

c) Supply and fixing of CP Angle cock tap

d) Supply and fixing of Brass chromium plated soap tray of size 150mm x 100mm

463.2) Providing Wall Panelling using one side teak wood sheet with melamine polishing using aluminium tubular section of size 50mm x 25mm x 2mm thick

503.1) Nylon rope for Bore well

504.5) Supplying, laying, fixing and jointing the following UPVC pipes as per D- 1785 b).40 mm dia UPVC pipes

Cable tray 528.1.1) Supply and fixing of perforated cable trays of sizes without cover as given below made out of 14 SWG CRCA sheet stee 300 X 100mm Wide

528.1.2) Supply and fixing of perforated cable trays of sizes with cover as given below made out of 14 SWG CRCA sheet steel 300 X 50mm Wide

532.2) Wallputty ( one coat)

540.1.3) Supplying and fixing of Outdoor Unit Stand etc., all complete and as directed by the departmental officers.

540.1.6.1) Supplying and Delivery of AC unit 1.50 Ton 3 Star split Air Conditioner

540.1.9.1) Supplying and fixing of 4 KVA V-Guard Stablizer

540.2.1) Supplying and laying of Copper pipe with Insulation

608.1) Supplying, laying, fixing and jointing the following UPVC pipes as per D- 1785 of a) 50 mm dia UPVC pipes

b) 40 mm dia UPVC pipes

c) 32 mm dia UPVC pipes

609.6) Supply and delivery of 150mm OD of PVC casing pipes (6kg/cm2) as per IS 12818 /1992 of approved quality for borewells

609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kg/cm2) as per IS 12818 /1992 of approved quality for borewells

609.6.2) Supplying and fixing of 200mm CS pvc casing pipe as per IS 12818/2010 with excise duty

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) (a) 150mm dia casing pipes assembly

(b) 200mm dia casing pipes assembly

613.1) supplying and delivery of submerssible pumps discharge capacity 11 m3 per hour , head 10 mt, solid handling size -30mm , make grundfos / kishore /nanfang/equivalent

615.2.1) Labour charges for the erection of submersible pumpset in Borewell/open well

615.3.1) Supply and delivery of D.O.L panel control board with ISI Mark for three phase

615.3.5) Supply and delivery of MS Fabricated DOL panel control board with ISI Mark for single phase

616.4.1) Supplying, laying and fixing the HDPE Pipes PE-63 with PN16 (Above GL) (a) 63mm dia HDPE

(b) 110 mm dia HDPE

616.4.4) a). 40 mm dia HDPE 10 Kg/cm2 pipe

616.5) supplying and fixing of following UPVC Valve with necessary fittings ect all complete a) 63 mm dia UPVC Valve

b) 110 mm dia UPVC Valve

616.5.1) Supplying and fixing of following dia POLYPROPELENE (P.P) FOOT VALVE a) 200mm dia valve

(b) 110mm dia valve

619.2) supplying and fixing of 100 mm dia Wafer type Non return Valve

616.8) supplying and fixing of 100 mm dia CI/DI Puddle pipes

616.8.1) supplying and Fixing of 100mm dia CI-DI LO.G of 2.75 M Pipe

616.9) supplying and delivery of level control float switches to all drives

619) Supplying and laying of following GI pipe B class.(Above Ground Level) a.) 100mm dia GI pipe

619.1)Supplying and fixing of following dia GI specials a.) 100 mm dia GI bend

b) 100 mm dia GI Coupling

619.2.1) Supplying and fixing the following Specials. a. 50 mm non return valve

b. 50 mm Gate valve

a. 40mm GM gate valve

b. 25mm GM gate valve

707.3.1) Supplying and laying 3 core 4 sqmm FLAT COPPER CABLE with ISI mark

725.2) Supply and fixing of MS cable box of suitable size on wall

741.1.1) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in Flush with wall with earth connection ( For AC Plug ) Legrand ( MDS) / Hager( L& T/) Equivalent/ Superior variety

778.2.4) Supplying, fabricating, erecting and fixing 8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling

Providing Borewell and Pump Set arrangements 799.2) Drilling of 150mm dia borewell in Hard rock (a)Below ground level

799.3) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

799.3.1) Supply and fixing of PVC 160mm dia top end cap of approved make

832.5.2) Supplying and fixing in position of UPVC window of casement type( open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

911.2) supplying and delivery of ss-304 bar screen with 12&20mm (coarse&fine) clear space material -ss maximum flow rate - 20 m3/hour

Fire Fighting Arrangements 929.1) Supply and installation of 12 zone automatic fire alarm panel

929.2) Suppply and installation of smoke detectors with base and led to operate on 24V DC suppply etc all complete

929.3) Supplying and installation of heat detector to operate on 24 V DC supply make system sensor WL secutron

929.4) Supply and installation of Electronic hooter 5 watts capacity wall mounting type

929.5) Suppply and installation of manual call point with hammer and chain

929.6) Supply and installation of 2X 1.50 Sq.mm copper cable hum in suitable PVC conduict pipe

929.7) Supply and installation of responsible indicator for smoke deductor inside rooms

929.8) Supply and installation of ABC type fire Extinguishers, cylindrical in shape,wall mounting type,

929.9) Supply and installations of CO2 type fire Extinguishers, wall mounting type,

Numbering and Lettering 945.1) Supplying and fixing of following size aluminium die casting lettering and numbering material a) 45cm Letters (18")

945.2) Supplying and fixing of following size 24" x 4" and 5" dia plastic form plate of 3mm thick with 3" height vinyel cutting

945.3) Supplying and Fixing of Brass Name Board with Brass Letter.

945.4) Supplying and fixing of tamilnadu government Emblem of 3’-3” dia having brass edging logo brass plate

945.5) Supplying and fixing of following size Aluminium letters with approved Coloured powder coated

945.6) Supplying and delivery of following God - rej/Equivalent novtal lock a.) 6 Lever with 3 keys

Sthapathy Work 946.1) Providing Sthapathy Kambu, Kabothagam, Navadai and Kodipalai at Top of the SunShade , Work for Front side elevation windows for the Combined 2 nos of W- 0.90x 1.650 window with Center pillar in Third and Terrace Floor

946.2) Providing Sthapathy Kambu, Kabothagam,Navadai and Kodipalai at Top of the SunShade for Front side Center pillar in Second Floor

946.3) Providing Sthapathy Kambu, Kabothagam,Navadai and Kodipalai at Top of the SunShade Work for Front side elevation windows size 2.70X1.65 m in Second and Third Floor

946.4) Providing Sthapathy Kambu, Kabothagam,Navadai and Kodipalai at Top of the SunShade ,Work for Front side elevation windows size 2.70X1.65m in Stilt and First Floor

946.5) Providing Sthapathy Kambu, Kabothagam ,Navadai windows for the 2 nos of W- 0.90x 1.650 window with Center pillar in Second and Third Floor

946.6) Providing Sthapathy Kambu, Kabothagam,Navadai and windows for the 2 nos of W- 0.90x 1.650 window with Center pillar in First Floor etc.,

946.7) Providing Sthapathy Kambu, Kabothagam,Navadai windows for the 2 nos of W- 0.90x 1.650 window with Center pillar in Stilt Floor

946.8) Providing Sthapathy Kambu, Kabothagam,Navadai windows for the 2 nos of W- 0.90x 1.650 window with Center pillar in Stilt and First Floor

946.9) Providing Sthapathy Cornice Work for Side Staircase Head Room Front side Design at Parapet Level

947) Providing Sthapathy Cornice, Bothiyal, Piller Design at Top Box Design at Bottom Work for Round Column Stilt to First Floor at Center Portico

947.1) Providing Sthapathy Cornice, Bothiyal, Piller Design at Top Box Design at Bottom Work for Round Column Stilt to First Floor at roof at Side Portico

947.2) Providing Sthapathy Cornice Bothiyal, Piller Design at Top,Box Design at Bottom Work for Pillar First Floor to Head Room roof at Center Portico

947.3) Providing Sthapathy Cornice, Bothiyal, Piller Design at Top,Box Work for Pillar StIlt Floor to Third Floor roof at Center Portico

947.4) Providing Sthapathy Cornice Work for Ground Floor Roof Projection Kabothaga Border Work 6"

947.5 Providing Sthapathy design Work for Portico Kodungai in First Floor roof at Center Portico

947.6) Providing Sthapathy design Work for Portico Kodungai in First Floor roof at Side Portico

947.7) Providing Sthapathy Cornish Work for Parapet in First Floor Roof Projection Kabothaga Border Work 9"

947.8) Providing Sthapathy Cornish Work for Parapet in Third Floor Roof Projection Kabothaga Border Work 9"

947.9) Providing Sthapathy design Work for Kodungai in Center Head Room

948) Providing Sthapathy design Work for Kodungai in Side Head Room

948.1) Providing Sthapathy design Work for Kodungai Middle Portion in Third Floor roof

948.2) Providing Sthapathy design Work for Parapet Top Butten with Bell

948.3) Providing Sthapathy design Work for Additional Piller Projection 5" Staircase Portico to Head Room

WAN and LAN Arrangements 955.2) Supply & delivery for Singnamax /Amp/Molex CAT 6E UTP cable of site of work for the Lan Network wiring

955.3) Labour charges for laying of CAT6 cable through the PVC pipe /Channel

955.4) Supply of NT RJ 45 information Outlet box connector socket fixingcharge etc., all complete.

955.5) Labour charges for R.J 45 Box fixing and termination etc all complet,.

955.6) Labour charges for providing RJ 45 connection the patch panel

955.7) Lan intergration charges for checking data connectivity between system

955.8) Supply and Gigabyte Network switch 24 port etc.,

955.9) Supply of digilink /Singnamax patch panel 24 port etc., complete

956) Supply of CAT6 Patch Card

956.1) Supply Wall mountable data rack etc., complete

956.2) Supply and Data Rack mountable PD unit

Lift Arrangements 958.4) Supply, Erection and Commissioning of 1No of Passengers lift (13 Persons - 884 Kgs.)at site according to the following specification

958.5) Annual Maintanance charges for 2nd Year 5%

Annual Maintanance charges for 3rd Year 5%

Annual Maintanance charges for 4th Year 5%

Annual Maintanance charges for 5th Year 5%

958.6) Preparation of necessary drawings for both Lift sets for approval by Chief Electrical Inspector to Government / CEA,

Genset 959.1) Supply, installation, testing and commissioning of 160 KVA Diesel Generator set Class IV Generators with standared panel sub class :

959.2) Erection, Testing and commissioning of 160 KVA Diesel generator set.

959.3) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator.

959.4) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer

959.5) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia

959.6) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool

959.7) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe

959.8) Preparation of necessary drawings for both DG sets for approval by Chief Electrical Inspector to Government / CEA, obtain approval

959.9) Providing safety equipments: CO2 fire extinguisher : 1 No (4.5 Kg).; 9 ltrs capacity fire buckets: 3 Nos., & rubber mat : 1 No.

960) Earthing as per the ISI specification with an earth

961) Towards fabrication supply and installation of CT metering box for availing the power supply from TANGEDCO

Lighting Arrester 971.1)Supply and installation of Advanced Early Streamer Emitter type Lightning arrestor

971.2) Supply and Installation of copper 18 mm Copper Rod size of 8 feet length buried in earth

971.3) Supply and Installation of 50 MM dia GI mast of 5 Mtrs length with insulators, enamel painted to approved colour part

971.4) Supply and installation of 70 SQMM copper braided/Solid sheathed cable run on the external wall from terrace to the ground floor

Public Address sytem 983.1) Supply and Installation of CCSE 700 chairman Unit Long Microphone Built in speaker Make : Bosch Model No: CCSE-CML/Equivalent

983.2) Supply and Installation of Delegate unit Long flexible gooseneck, Make : Bosch Model No: CCSE-DC -700 series/Equivalent

983.3) Supply and Installation of control Unit Bosch Model No: CCSE-CV -700 series/Equivalent

983.4) Supply and Installation Ahuja Pre- Amplifier Model No: MMS55 (250W)/Equivalent

983.5) Supply and Installation of 30 W Speaker Ahuja/Equivalent

983.6) Supply and Installation of gooseneck, Microphone etc.,

983.7) supply and Laying of 2 core Loud Speaker cable with PVC pipe and accessories etc.

983.8) supply and Laying of 8 core 7/36 shielded conference cable with PVC pipe and accessories etc.

983.9) Supply and Installation of 8 Pin Type Socket with suitable M.S. Box And accessories.

984) Renewal of Supply and Installation of 1 KVA Stabilizer etc.,

984.1) Supply and Installation of wireless handheld microphone etc.,

984.2) Supply and Installation M.S Audio equipment racb etc.,

984.3) Supply and Installtion of LCD projector

984.4) Supply and Installation of 8’x6’ Motorized screen.

984.5) Supply and installation of 1 ½ x 1 ½ Ceiling Mounting kit. Make: Liberty/Equivalent

984.6) Supply and installation of 20mtrs. Length VGA Cable cable, Power cable Audio and video cable Both end with connector.

VIJAY RANI CONSTRUCTION

SMP ASSOCIATES

PTM PROJECTS PVT LTD

Bidder Name

PTM PROJECTS PVT LTD

SMP ASSOCIATES

VIJAY RANI CONSTRUCTION

Britto Dhanasekaran