Mannargudi Municipality-Renovation of Shutter to control the flow of water Ruckmanikulam West side at Ward No.29

Earth work excavation for foundation in all type of soil with initial lead and lift including all cost and conveyance of all material and labour charges etc., complete as per standard specification.

Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement concrete 1:4:8 Mix ( One cement ,Four sand , eight aggregate) using 40 mm ISS Hard Blue Granite metal including cost and conveyance of all materials and labour charges etc,complete as per standard specification

Supplying and erecting centering for PCC work sides and soffits including shoring strutting upto 3m height including all cost and conveyance of all materials and labour charges etc. complete as per standard specifications.

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Fabricating, supplying and erection of Screw Gearing Steel Shutters of Size up to 1.00m width consist of Skin plate made out of 8mm thick Mild Steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick Mild Steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red oxide primer. The rate including cost of materials, consumables, labours, power charges, conveyance charges, charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and including all taxes etc., complete.

Fabricating, supplying and fixing of 63 mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and including all other taxes etc., complete.

Fabricating, Supplying and fixing of Top Beam made up of 150 x 75 mm (ISMB 150) duly drilled to suit the Head set Assembly with required bed bolt made out of 25 mm Mild Steel Round rod duly threaded with suitable anchorage arrangements to a height of 0.60 m with necessary Fish plate made out of 12 mm Mild Steel Plate of size 0.30 x 0.15m 2 Nos with required holes. Conveying and leading the top beam arrangements to the worksite. Fixing the top beam arrangements at the top of the vent to correct position including dismantling the existing eroded top beam, conveying and stacking at the section store. The top beam should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil works conveyance charges for labours and materials and including all other taxes etc., complete.

Fabricating, Supplying and fixing of Head Set Assembly medium duty with hexagonal nut(approximate 70 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at section store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for wooden pattern, moulding and charges for all machining equipments, conveyance charges for labours and materials and including all other taxes etc., complete.