Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.2 LAccepted-Finance MOSAT HARIPUR RD VILL P O HARIPUR DIST HOOGHLY PIN 712701 | HARIPUR | HOOGHLY | WEST BENGAL | 712701 | ₹17.2 L | L1 | Accepted-Finance 1st lowest bidder |
| 2 | L2₹18.3 LRejected-Finance 3 C DR JAGABANDHU LANE KOLKATA 700012 | KOLKATA | KOLKATA | WEST BENGAL | 700012 | ₹18.3 L | L2 | Rejected-Finance 2nd lowest bidder |
| 3 | L3₹18.9 LRejected-Finance | ₹18.9 L | L3 | Rejected-Finance 3rd lowest bidder |
| 4 | L4₹20.5 LRejected-Finance | ₹20.5 L | L4 | Rejected-Finance 4th lowest bidder |
| 5 | L5₹20.7 LRejected-Finance | ₹20.7 L | L5 | Rejected-Finance 5th lowest bidder |
| Sl No | Description | Qty | Unit | MODERN ELECTRIC L3 | S. A. ENTERPRISE L2 | GHANASHYAM ELECTRIC STORES L1 | SUMAN ENTERPRISE L5 | CHATTERJEE ELECTRICALS L6 | T. K. ENTERPRISE L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply & Installation of floor cum wall mounted cubicle type indoor compartmentalized panel size 9000mm(L) X 1200mm (H) X 350mm (D) or as per requirment , 415V., 50 Hz. dust & moisture proof LT Distribution panel board with following electrical accessories fabricated from 14 SWG CRCA sheet with MS angle frame as required. The base of panel should be made with MS channel & Angle. The panel should have adequate strength & space to accommodate the incoming & outgoing switches and with all interconnection in between the switches and changeover switch with copper flat / flexible wire of suitable capacity. The panel should be provided with cable alley for facilitating connection of all the incoming & outgoing XLPE Cables with termination arrangement by S&F copper terminal stud / bolt of required sizes. The panel with earthing attachment is to be painted with powder coated paint as per direction of EIC. The panel board should consist with the followings:- [ To be installed at New Fire Panel Room] | 1 | Set | 2,66,000 ₹2,66,000 Lowest | 4,25,529 ₹4,25,529 | 3,13,682 ₹3,13,682 | 3,10,000 ₹3,10,000 | 3,00,000 ₹3,00,000 | 2,85,000 ₹2,85,000 |
| 1.01(A) INCOMER:- 415V, 400A 4 pole 36 kA (Uimp=8KV), Ics= 100%Icu MCCB with microprocessor based release having adjustable O/L (0.4 to 1x In or better), Adjustable S/C (1/1.5 - 8/10 Ir), Inbuilt Instantenious protection, Adjustable E/F, Adjustable neutral protection at 50%, 100% , Both side spreader link, extended rotary handle etc. [L&T/Schneider/ABB/Legrand) - 2 Sets. | |||||||||
| 1.02(B) OUTGOING:- 415V, 400A 4 pole On load chanover Switch incl. extended Operating Handle Kit (handle + shaft + center bush + bush clip) etc. [L&T/HPL/C&S) - 1 Set. | |||||||||
| 1.03(C) METERING:-Digital Multifunction Meter (class 0.5) capable of display of Current, Volt, KWH, PF, MD with date & time stamp etc. with RS-485 port for displaying alongwith 400/5A, max 15 VA,CL:0.5, tape wound CT's for metering with phase indication lamp RYB incl. control circuit MCB (Make- Kappa) for all three phases -- 1 set. | |||||||||
| 2.00Supply of 3/4 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] | |||||||||
| 2.01 | 4 Core 300 mm² XLPE Ar./ Al. Cable.[(From SS-II DG Panel to New Fire Panel ( 148 Mtrs single run approx.) & SS-OPD Raw Panel to New Fire Panel (262 mtrs single run approx.)] | 410 | Mtrs. | 3,500 ₹14,35,000 | 3,130 ₹12,83,300 | 2,962 ₹12,14,420 Lowest | 3,834.61 ₹15,72,190.1 | 3,873.35 ₹15,88,073.5 | 3,834.61 ₹15,72,190.1 |
| 2.02 | 3 Core 10 mm² XLPE Ar./ Al. Cable. (From Main timer to compound light). | 55 | Mtrs. | 240 ₹13,200 | 436 ₹23,980 | 183 ₹10,065 Lowest | 271.37 ₹14,925.35 | 274.11 ₹15,076.05 | 271.37 ₹14,925.35 |
| 3.00Laying of two cables above 185 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. | |||||||||
| 3.01 | 4 Core 300 mm² XLPE Ar./ Al. Cable. | 30 | Mtrs. | 402 ₹12,060 | 1 ₹30 Lowest | 400 ₹12,000 | 397.62 ₹11,928.6 | 401.63 ₹12,048.9 | 397.62 ₹11,928.6 |
| 4.00Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed | |||||||||
Tender Value
₹20.5 L
EMD Value
₹41,000
Closing Date
25 Jun 2026, 12:00 pmClosed
Exe.Engr._I, KSHED, P.W.Dte.
75 D H Road Kidderpore Kol_23
Electrical installation work for New Fire Pump station to be installed adjacent to the existing old pumping station and the existing pond in the campus of IPGMER-SSKM Hospital, Kolkata
2026_WBPWD_5014804_1
WBPWD/EE-I/KSHED/Q08/26-27
Open Tender
ELECTRICAL WORKS ORG
Item Rate
30 days
SSKM Hospital
Please refer Tender documents.
5 documents required · 5 mandatory
₹41,000
O/o EE, KSHED, P.W.Dte.
2 Jul 2026
1 Jun 2026
29 Jun 2026
1 Jun 2026
25 Jun 2026
9 Jun 2026
8 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply & Installation of floor cum wall mounted cubicle type indoor compartmentalized panel size 9000mm(L) X 1200mm (H) X 350mm (D) or as per requirment , 415V., 50 Hz. dust & moisture proof LT Distribution panel board with following electrical accessories fabricated from 14 SWG CRCA sheet with MS angle frame as required. The base of panel should be made with MS channel & Angle. The panel should have adequate strength & space to accommodate the incoming & outgoing switches and with all interconnection in between the switches and changeover switch with copper flat / flexible wire of suitable capacity. The panel should be provided with cable alley for facilitating connection of all the incoming & outgoing XLPE Cables with termination arrangement by S&F copper terminal stud / bolt of required sizes. The panel with earthing attachment is to be painted with powder coated paint as per direction of EIC. The panel board should consist with the followings:- [ To be installed at New Fire Panel Room] | 1 | Set | - | - |
| 1.01 | (A) INCOMER:-
415V, 400A 4 pole 36 kA (Uimp=8KV), Ics= 100%Icu MCCB with microprocessor based release having adjustable O/L (0.4 to 1x In or better), Adjustable S/C (1/1.5 - 8/10 Ir), Inbuilt Instantenious protection, Adjustable E/F, Adjustable neutral protection at 50%, 100% , Both side spreader link, extended rotary handle etc. [L&T/Schneider/ABB/Legrand) - 2 Sets. | - | - | - | - |
| 1.02 | (B) OUTGOING:-
415V, 400A 4 pole On load chanover Switch incl. extended Operating Handle Kit (handle + shaft + center bush + bush clip) etc. [L&T/HPL/C&S) - 1 Set. | - | - | - | - |
| 1.03 | (C) METERING:-Digital Multifunction Meter (class 0.5) capable of display of Current, Volt, KWH, PF, MD with date & time stamp etc. with RS-485 port for displaying alongwith 400/5A, max 15 VA,CL:0.5, tape wound CT's for metering with phase indication lamp RYB incl. control circuit MCB (Make- Kappa) for all three phases -- 1 set. | - | - | - | - |
| 2Supply of 3/4 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] | |||||
| 2.01 | 4 Core 300 mm² XLPE Ar./ Al. Cable.[(From SS-II DG Panel to New Fire Panel ( 148 Mtrs single run approx.) & SS-OPD Raw Panel to New Fire Panel (262 mtrs single run approx.)] | 410 | Mtrs. | - | - |
| 2.02 | 3 Core 10 mm² XLPE Ar./ Al. Cable. (From Main timer to compound light). | 55 | Mtrs. | - | - |
| 3Laying of two cables above 185 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. | |||||
| 3.01 | 4 Core 300 mm² XLPE Ar./ Al. Cable. | 30 | Mtrs. | - | - |
| 4Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.72 MB
TenderForm.pdf
Tender Documents • 0.69 MB
BOQ_5083196.xls
BOQ • 0.86 MB
corrigendum_1.pdf
PDF • 0.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].