REPAIR MAINTENANCE TO JOINERY PLASTERING PLUMBING SANITARY FITTING AND CERTAIN MISC WORK IN OFFRS MD ACCN AND REPAIRS MAINT TO DRAINS CULVERTS FENCING HARDSTANDING FOOTPATH COMPOUND AT MD ACCN AREA OF AGE BR I UNDER GE MIS MHOW

Amount

Taking down of chowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames) complete all as specified and directed.

Taking down of chowkat or frame area exc 1.5 Sqm and not exc. 4.0 Sqm each complete all as specified and directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

Taking down shutter of any description n exc. 1 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and refixing in the same opening after repair work complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube,edges will be paited to match with prelam sheet supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge,Paneling of prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.given SSR 2020 complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

S & F aluminum anodised alloy handle 100 mm cast type complete all as specified and directed.

S&F Butt hinges, medium weight,cold rolled mild steel, 75mm size complete all as specified and directed.

S & F 35mm thick 2nd class HW Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 2nd class hard wood glazed skelten shutter, 35mm thick, divided into squres plain chamfered open rebated and prepared to received glass guaze etc, edges of framing plain chamered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shuters complete all as specified and directed.

S & F 2nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Cutting holes in brick/block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete all as specified and directed.

S & F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fast wall ties hooks for hanging fans, plain angle etc complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F aluminum anodised alloy handle 150 mm cast type complete all as specified and directed.

S&F in repairs aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S & F in repairs aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F in repairs aluminum anodised alloy handle 150 mm cast type complete all as specified and directed.

S & F stainless steel butt hinges 100 mm long complete all as specified and directed.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5sqm in each panes incl including hacking out old glass complete all as specified and directed.

All as per item No. 28.00 above but for figured glass pin headed type

S&F glazing with 4.8mm thick sheet glass ordinary type incl rubber beadings/gaskets around glass panes incl including hacking out old glass complete all as specified and directed.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete all as specified and directed.

S&Fin repairs mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surface applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified and directed.

S & F in repairs 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S & F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.

S&F Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size complete all as specified and directed.

S&Fin repairs Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size complete all as specified and directed.

M&L in repairs18/19mm thick Prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

M&L in repairs 18/19mm Veneered particle boards interior grade,solid core, general purposes type, faced with decorative veneers on one face of type 'BB', fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete all as specified and directed.

S&F in repairs 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process complete all as specified and directed.

S&F in repairs good quality stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F in repairs 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F in repairs 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F in repairs mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S & F in repair modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete as specified and dirceted.

All as per item No 51.00 above but basket size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.

All as per item No 51.00 above but basket size 0.50 m x 0.53 m x 0.21 m complete as specified and dirceted.

S&F in repairs Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading complete all as specified and directed.

S&F in repairs aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

M & L for Brick work with using Modular size flyash Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete including dismantling old brick works complete all as specified and directed.

All as per item No 56.00 above but except bricks. Note: Old serviceable brick obtained from demolition shall be re-used

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixing with WPC including taking down old plaster complete all as specified. Note: WPC will be measured and paid separately.

Supply only Liquid Water proofing compound complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed.

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc. including taking down old plaster complete all as specified and directed.

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surface and apply two coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for applying two or more costs of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm in new plastered surfaces complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of primer white or tinted complete all as specified and directed.

M &L for preparation of new surface of wall and applying three coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M & L for preparation of newly plastered surfaces of Ceiling,chajja and applying three coats of white wash complete all as specified and directed.

M&L for applying two or more costs of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of old plastered surfaces complete all as specified and directed.

M & L for Preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces and apply one coats of oil bound distemper complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.06 sqm,vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement mortar in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M & L for Non Skid coloured Ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors over and including 15mm thick screed in CM 1:6 , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed..

M&L for Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed in CM(1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface as in skirting/dado 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm size 6-7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for heavy duty industrial vitrified coloured tiles of size 30cmx30cmx10mm thick (with grey cement and pigments) set,, jointed and pointed in neat cement slurry in floor, laid over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.

M & L for 20 -25 mm thick kota stone, machin cut kota stone slab flooring mirror polished over and including15mm cement screed base laid in CM 1:6 , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M & L for Granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bed in CM 1:6 including dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for cement concrete 75mm thick type D-2, (1:4:8) using 40mm graded stone aggregate as in subbase etc. including demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for chequered cement concrete tiles (glossy finish) 40 cm x 40 cm x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) and necessary PCC coping ,type C1 1:3:6 including dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and as directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and no pigment and necessary PCC coping ,type C1 1:3:6 including dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for 80 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and no pigment and necessary PCC coping ,type C1 1:3:6 including dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

S & F in repair GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S & F in repair GI tubing 20 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

S & F in repair Galvanised steel tubes 50mm dia medium grade for cattle trap,spout pipe etc including welding, greasing etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.

S & F in repairs Rotational moulded polyethylene water storage tanks (two layers) of capacity of 500 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified & directed.

S&F in repairs Rotational moulded polyethylene water storage tank (two layer) of capacity 1000 ltr (Cylindrical/vertical with closed top) , ISI marked hoisted & fixed in position and should be sintex antibacterial or equivalent complete all as specified and directed.

S & F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified & directed.

S & F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified & directed.

S & F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white colour with integral foot rests (excluding flushing cistern and flush pipe) complete including provn of cement concrete bedding complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) including Plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repairs wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type) complete including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

S&F in repairs of 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed.

S&F in repairs of 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) for kitchen sink complete all as specified and directed.

S&F 15mm bore pillar taps, half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair 15mm bore pillar taps, half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S & F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type complete including brackets complete all as specified and directed.

S & F in repairs CP brass fancy type 15mm bore bib taps half turn, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repairs CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repairs CP mixer for WHB mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S & F in repairs Wall mixture cromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S & F in repairs Angle Stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repairs health faucet with flexible pipe of one mtr length including stand complete all as specified and as directed.

S&F in repair fancy type chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S & F in repairs CP Brass Fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S & F in repairs CP toilet paper holder complete all as specified and as directed.

S & F in repairs PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed.

S & F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as spd and directed by Engr-in-Charge.Note : siz of plate rack should not be less than 900x 200x1200mm and weight of rack shall not be less than 8.50 kg each complete all as specified and directed.

S & F in repairs PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 350 x 450mm complete all as specified and directed.

S&F in repairs brass chromium plated corner glass shelf 5mm thick with bracket complete all as specified and directed.

S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long complete all as specified and directed.

S&F in repairs soap dish (ovel) type mild steel chromium plated of size not less than 50mm dia complete all as specified and directed.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed.

S & F in repairs towel ring CP complete all as specified and directed.

S & F in repairs Plastic water closet seat cover, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

S & F in repairs over head tank cover of 500-1000ltr capacity all as specified and directed by Engr-in-charge.

S&F in repairs 25 mm dia stainless steel curtain rod as approved by GE complete all as spd and directed.

S&F in repairs 25 mm dia S/S decorative brackets with arrangements as approved by GE complete all as spd and directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L for cement concrete 75mm thick type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection etc. finished even smooth without using extra cement including demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

S&F in repairs 25 mm thick pre-cast cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in louvers and jallies (measured solid) complete, including all mouldings and including pre-cast frame set in cement mortar 1:6 complete all as specified and directed.

M&L for sunken floor treatment (in replacement) by providing water proofing treatment to sunken floor surfaces of RCC slab by the following specifications complete all as specified and directed :- (a) Demolition of old sunken surfaces complete and cleaniong of all loose particles and apply cement slurry @3.00 kg / sqm on old surfaces by brushing. (b) Providing PCC 1: 1.5:3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement. (c) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (d) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @0.40 Kg/Sqm complete. On complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (e) After laying of all sewage/plumbing pipes with fixtures in position, apply two coats of polymeric based chemical as per manufactures instructions over bottom and sudes of sunken portion upto 600 mm height. (f) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with plyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. (g) Filling the sunken floor with PCC 1:5:10 type E-2 using brick aggregate. (h) Fixing of 50 mm dia CPVC pipe projecting 450 mm clear of face outer wall shall be provided to drain out seepage water if any. (i) S& F of 400X400mm size coloured Non skid tiles and including over a 15mm thick screed bed CM (1:6). (j) Testing of sunken as per specification mentioned in SSR part-I/ P.S. (NOTE : Top Floor Area shall be measured for payment).

Cutting of shubs,vegetation including small trees,grass,bush,weed and roots under growth and saplings n.exc 30cm in girth on wall/roof/chajja upto 15m hight by using necessary scaffolding work/ ladder and safety devices etc and removing to a distance n.exc 50 m ,clearing site all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified and directed.

S & F in repairs over head tank cover of 500-1000ltr capacity all as specified and directed by Engr-in-charge.

M & L for complete reparing of RCC roof projection, chajjas,roofs, facia, column etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : Work shall be carried out to the building 12 m height and rate quoted shall be inclusive for necessary scafolding and safety devices as required. Nothing extra shall be paid.

Excavating in post holes (or similar holes) each in soft/loose soil n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25 cm complete all as specified and directed.

S&F in repairs MS Framed work Fe-410-W(Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering. Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete all as specified and directed.

S&F in repairs mild steel work (Tubular, square/rectangular hollow section) as in purline, rafter and wind ties, cleat roof trusses etc including securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete all as specified and directed.

M&L for preparation of new steel &iron surfaces of any description, not otherwise, described, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F 0.50mm thick (total coated thickness) pre-colour, pre profiles Galvalume/zincalume sheets of required colour and design having tensile strength of 550 Mpa,zinc colour coating AZ-150 as in roof ,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation side laps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions complete including dismantling old Plain or corrugated steel sheeting/AC sheets of any thickness, complete all as specified and directed.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement for inserting galvalume sheet on wall and necessary coping work over the sheet along the wall complete all as specified and directed.

M&L for cement concrete type B0 1:2:4 using 12.5mm graded aggregate as in copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Racking out joints/pointing to to block in course masonry, or concrete block walling in cement mortar complete all as specified and directed.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar (1:3) complete all as specified and directed.

M & L for Stone walling of square rubbled masanory, regular coursed (Bangalore type) well bounded and solidity hearted built in CM 1:6 including demolition of old stone masonary complete all as specified and directed.

All as per item No. 145.00 above but except stones.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixing with WPC complete all as specified and directed. Note: WPC will be measured and paid separately.

M & L for providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including demolition of old RCC slab and incl necessary use and waste of form work complete all as specified and directed.

S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M & L for PCC 1: 2 :4 type B-2 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed.

S&F factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required at or near ground level complete all as specified and directed.

M&L for PCC (1:3:6) type-C2 (using 40mm graded stone aggregate) as in surface channel and drain including necessary form work complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for Cement Concrete 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars & posts (incl caps & bases) complete all as specified and directed.

S&F in repairs MS Hand rails, half round or other stock section hand-rail straight portion,drilled and countersunk for balusters running bars, nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing incl cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets incl all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repairs Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long n.exc 10cmm long and diameter of neck 5 to 10mm complete all as specified and directed.

S&F in repairs Mild steel Round bar 10 mm dia and over cut to length band to shape required incl cranking, bending spirally for similar work.conforming to Fe-410-W(Gde.E-250) quality-A or Fe 290(Gde-E-165) complete all as specified and directed.

S&F in repairs MS work as in posts and struss of fencing, fillets, plates etc including cutting tops to shape as directed,drilling holes, notching for wire etc including all necessary drilling, bolting or ribeting etc complete confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.with provission of binding wire complete including dismantling of old fencing complete all as directed and specified.

Supply chain link MS galvanisd fencing, any size or type as approved complete all as specified and directed.

M&L for 20 mm thick granite machine cut, in floor bedded and jointed with grey ement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete including dismantling of old granite complete all as directed and specified.

M&L for 20 mm thick Black granite thick machine cut, 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 10 mm thick backing in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete including dismantling of old granite complete all as directed and specified.

M&L for preparation of old painted surfaces of steel/steel based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.

r.s.jain & sons (BID ID -3330991)

M/S Sunshine Construction (BID ID -3331209)

Goyal Construction (BID ID -3322440)