GE/CHM-38/2021-2022 SPECIAL REPAIR TO DRAIN AND CONSTRUCTION OF DRAINAGE PIPE LINE WITH PROTECTIVE WALLS AND PROVN OF TOILET UNDER AGE B/R I AT CHANDIMANDIR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard and dense soil all as specified & directed by Engineer-in-Charge.

Material and labour rough excavation not exceedign 1.5m deep and getting out in hard / dense soil complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Material and labour brick work with fly ash brick old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

All as per serial item No 4 herein before but except bricks

Material and labour brick work with fly ash brick old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

Material and labour brick work with fly ash brick old size bricks, straight or curved on plan exc 6 metre mean radius built, half brick thick walls built in cement mortar 1:4, complete all as specified & directed.

Material and labour for 40mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in flooring finishing even and fair complete all as specified & directed.

Material and labour Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat complete all a specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.

Removal excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Material and labour hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

Material and labour, plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.

Material and labour plain cement concrete 1:5:10, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Material and Labour reinforced cement concrete type A-1, 1:1½:3 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and Labour form work to sides and soffits of floor or roof beams, beam hanunchings, girders, shelves including supports, overhangs etc also splays between floors and beams etc rough finished surface of concrete flat complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

Material and labour mild steel TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

Material and labour, cement concrete type C-1, 1:3:6 using (20 mm graded crushed stone aggregate) as in fencing post, roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of fo Running metres or moulds with plain faces complete all as specified and directed.

All as per serial item No 19 hereinbefore but in cement concrete 1:2:4, type B-1 using (12.5 mm graded crushed stone aggregate)

Material and labour 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous resistance aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.

Material and labour non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.

Material and labour glazed ceramic tiles in vertical surface 450mm x 300mm x 7mm thick ,joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for 10mm thick rendering in Cement and Sand mortar 1:4 over concrete /brick wall surfaces finished fair and even without using extra cement including and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on brick wall or on concrete surfaces and finishing the surface fair and even without using extra cement all as specified and directed NOTE : water proofing compound to be measured and paid separately

Material and labour, 15mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick wall surfaces finished even and smooth without using extra cement, and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.

Material and labour rendering 5 to 10 mm thick plaster in cement mortar 1:3 on ceiling concrete surfaces and finishing the surface fair and even without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. (NOTE : water proofing compound to be measured and paid separately as supply only )

Supply and fix angular stop valve, brass, cast copper alloy, chromium plated fancy type, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Material and labour, three coats of white wash on wall surfaces including preparation of new surfaces complete all as specified and directed

Material and labour for two coats of colour wash over one coat of white wash on wall surfaces including preparation of new surfaces complete all as specified and directed.

Material and labour for two coats of colour wash over one coat of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed.

Material and labour, cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land, complete all as specified and directed.

Supply and fix, Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Supply and fix, Steel water tubes, 25mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

Supply and fix, stop valves , cast copper alloy, screwed down high pressure, with any type of handle, screwed both ends for 15mm dia bore iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix, stop valves , cast copper alloy, screwed down high pressure, with any type of handle, screwed both ends for 20mm dia bore iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix, stop valves , cast copper alloy, screwed down high pressure, with any type of handle, screwed both ends for 25mm dia bore iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix bib tap brass , with wall flange, chromium plated, cast copper alloy fancy type, short body, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fix, PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

Supply and fix, PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

Supply and fix, PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, laid in trenches, complete all as specified and directed.

Supply and fix, PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, laid in trenches, complete all as specified and directed.

Supply and fix, 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends provided with oval acess door any radius complete all as specified and directed.

Supply and fix 110mmPVC (SWR) vent cowl complete all as specified and directed.

Supply and fix 125mm /110mm dia PVC (SWR) gully trap, setting & jointing with solvent cement complete all as specified & directed.

Supply and fix for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge.

Supply and fix 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, complete all as specified in SSR Part-I and all as directed.

Supply and fix 20mm bore ball valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) complete all as specified and directed.

Supply and fixing steel ventilator factory made with top hung shutter including hinges, steel peg stay, a shop coat of red oxide zinc chrome primer, complete all as specified and directed.

Supply and fix 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fix for framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165, complete all as specified & directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with single piece extruded PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of single piece extruded PVC profile for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed by Engineer-in-charge.

Supply and fix, factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified & directed.

Supply and fix butt hinges 100mm size, of extruded aluminum alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.

Material and labour 150mm aluminum anodized barrel tower bolts of extruded section, dia of bolt not less than 10mm, complete all as specified and directed.

Supply and fix 150mm long aluminum handle fabricated type anodized complete all as specified and directed.

Supply and fix for vitreous china wash hand basin white, flat back of size 550 x 400 mm white including waste fittings, brass chromium plated coupling, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

Supply and fix angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) for 15mm bore pipe complete all as specified and directed.

Supply and fixing stop valve standard of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, complete all as specified and directed.

Supply and fix vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including makes connection to trap & flushing pipe, set in cement concrete and making good to the floor, complete all as specified & directed by Engineer-in-charge.

Supply and fix PVC valve less syphonic action type flushing cistern low level, dual flush, white with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor, complete all as specified & directed.

Supply and fix 15mm dia PVC connection with PTMT nut, of length 450mm, complete all as specified and directed.

Supply and fix for 15mm bore pillar tap, long body with quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fix Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms), 32mm bore for pipe, complete all as specified and directed.

Supply and fix for grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed by Engineer-in-charge.

Supply and fix angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) for 15mm bore pipe complete all as specified and directed.

Supply and fix for swivel shower of PTMT any colour with shower arm 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weght 40 gms) complete all as specified & directed.

Supply and fix shelf of PTMT fixed with and including Chromium plated steel screws and plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Supply and fix towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), complete all as specified and directed.

Supply and fix towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.

Material and labour, factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and no pigment (in top layer), different colours, laid over and including 40mm thick fine sand cushioning and joints filled with fine sand, complete all as specified and directed. Notes: 1. Rate includes supply and spreading of sand. 2. The shape/size of paver blocks shall be as approved by the GE.

Material and labour, factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and pigment (in top layer), different colours, laid over and including 40 mm thick fine sand cushioning and joints filled with fine sand, complete all as specified and directed. Notes: 1. Rate includes supply and spreading of sand. 2. The shape/size of paver blocks shall be as approved by the GE.

Material and labour salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.

Material and labour plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.

Material and labour precast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in landings, shelves, cover slabs (manholes etc) and similar articls with plain faces, set in cement morat 1:4 with and including necessary form work complete all as specified & directed by Engineer-in-charge.

Material and labour cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.

Material and labour, plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channel and drain complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified & directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc but excluding ashiar facings, dressed stone work and precast concrte articles complete all as specified and directed.

Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Supply and fix for framed work such as portions framed and hung as gats, includig pintel hinges, stops, hand made sliding bolts etcand similar work confirming to Fe-290 grade E-165, complete all as specified & directed by Engineer-in-charge.

Material and labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Material and labour two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on primer on surfaces of any description n.exc 10 cm width or girth when unconnected with other painting or when painted in a different tint including preparation of new surfaces complete all as specified & directed.

Excavation over areas not exceeding 1.5m deep and getting out hard and dense soil complete all as specified & directed by Engineer-in-Charge.

Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in soft /loose soil, complete all as specified and directed.

Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.

Supply and Fixing mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete as specified & directed by Engineer-in-charge.

Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item93 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.

Supply and fixing mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm and n.exc 10cm long, diameter of shank 11-15mm, complete all as specified and directed.

Material and labour mild steel round bars 10mm dia, for horizontal tie bars for fencing post etc including necessary welding with 50mm overlapping complete all as specified and directed.

Material and labour for Boulder pitching, laid dry, hand packed tightly and grounted with cement sand mortar 1:4 (top surface of stone pitching with smooth and levelled ) complete all as specified and directed.

Supply and fix factory made coloured chequered cement concrete tiles 300mm x 300mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Material and labour reinforced cement concrete (nominal mix) 1:2:4, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, balconies, roof, canopies, sheleves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour 15-18mm thick black granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on wash hand basin platform and like and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing, over screed bed 15mm thick screed bed in cement mortar 1:4, rubbing and polishing (mirror finish), complete all as specified and directed.

Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.

Material and labour for removing vegetation, silt, mud, soil etc from a drains of girth exc 30cm but n.exc 3.0m and cleaning and removing debrish exc 50m but n.exc 150m complete all as specified and directed.

Supply and fix connecting and testing change over switch 4 pole 415 volts on load of rating 63 Amp and including sheet enclosures complete including takig out old unserviceable switch complete all as specified and directed.

Material and labour point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.

All as per serial item 103 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed

All as per serial item 103 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 103 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Supply and fix sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through in PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces after taking out old unserviceable sub main wiring complete by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 4 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre. (ii) cutting chases and PVC conduit will be measured and paid separately.

Supply & Fixing for switch piano, flush type, 5/6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fix switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fix switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate angular type fixed on wall suitable for batten fitting including supply and fixing of 7 watts LED lamp complete all as specified and directed.

Supply and fix metallic body exhaust fan 300mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 900 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/Crompton /Khaitan

Material and labour sand cushioning to cable with dry fine sand in trenches 8cm below the cable and 15cm above the cable after laying complete all as directed by Engineer-in-Charge.

Material and labour for continuous brick edging with width equal to length of brick of whole burnt sub class ‘B’ old size bricks laid dry on end vertically including necessary excavation and earth work, complete all as specified and directed

Supply and fix CRCA sheet steel coated housing LED batten type luminaries (LED batten T8 shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink, 20 watt, 4 feet (appx) size, high efficiency electronic driver, system wattage not more than 10 watt device minimum 2KV, colour temperature not less than 5700K, LED driver making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm". Make C&S or equivalent .

All as per serial item No 117 hereinbefore but Warm white light fittig , 10 watt, 2 feet (appx) size, hretrofit type -ditto-

Supply, laying & fix along the poles/walls or passing through pipes or laid in trenches under floor or through walls etc jointing and testing LT Cross Linked Polythene Insulated (XLPE insulated) galvanized steel strip armoured electric cable, 1100 volt grade heavy duty with aluminium conductor overall served with an outer sheath of PVC complete of size 10 Sqmm 2 Core all as specified & directed by Engineer-in-charge. (Note:- Excavation, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately).

Supply and fix wll security light 25/30 watt with 40mm GE bracket of mdeium grade pipe and including wire nut and bolts and connecting accessories complete all as specified and directed.

Supply and fix sheet metal enclouser with 20 Amp MCB SPN including fitting fixture complete all as specified and directed.

Supply and fix electric water storage heater (vertical type geyser) 50 ltr 230 volts AC single phase with and including stainless steel tank, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolt etc as per site requirement, making necessary inlet / outlet water connection and electric connection, testing on load for full satisfaction of Engineer-in-Charge

Supply & Fixing for sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way double door with 200 Amps rated copper bus bar and blank plate as required complete all as directed.

Supply & Fix MCB ,SP , 240 volt, 6 Amps to 32 Amps, 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply & Fixing for MCB ,SPN , 240 volt, 40Amps 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

Material & labour, earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of presast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Sch Part-I (2009), complete all as specified and directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt.

BANSAL BUILDERS

Satyadev Builders

Gunjan and Gunjan Associates