SPECIAL REPAIR TO HATHIKHANA ROAD UNDER AGE B/R-I AT GE GWALIOR

Amount

Scarifying or picking up gravelled, macadam or bituminous macadam surfaces in area exceeding 400 Sqm & depth exceeding 50 mm and not exceeding 100 mm deep and removing a distance not exceeding 50 mtr and stacking serviceable materials etc complete all as specified and directed.

M&L for providing 150mm thick in two layers each layer 75mm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required, type of stone granite, trap or basalt complete all as specified and directed.

All as per item No 2 above but except materials (Materials may be obtained from item No 1 shall be used).

M&L for premix bituminous macadam using paving bitumen (VG-30) binder content of 4% by weight of total mix any penetration, laid/rolled and compacted to required gradient and camber (consolidated thickness 50mm or less) complete all as specified and directed.

M&L for preparing black top surfaces by brusing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and making true dust free surface, applying evenly a priming/tack coat with bituminous primer (Paving bitumen VG-10) @ 5 Kg per 10 Sqm on existing black top and providing bituminous semi dense asphaltic concrete (Design Mix) 30mm consolidated thickness using 5.5% of binder content by weight of total mix, using paving bitumen VG-30 laid/spread uniformly by means of mechanical pavers over black top surfaces & rolled with 8 to 10 ton power roller & compacted to required camber and gradient complete all as specified and directed.

M&L for preparing WBM by sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and making true dust free surface, applying evenly a priming/tack coat with bituminous primer (paving vitumen VG-10) @ 10 Kg per 10 Sqm and providing bituminous semi dense asphaltic concrete (Design Mix) 30mm consolidated thickness using 5.5% of binder content by weight of total mix, using paving bitumen VG-30 laid/spread uniformly by means of mechanical pavers over black top surfaces & rolled with 8 to 10 ton power roller & compacted to required camber and gradient complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for Providing cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in coping/bed block complete all as specified and directed.

S&F in repair machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness. M-40 Grade with grey cement and pigment over 25 mm sand cushion (the sand cushion shall be paid separately ) complete all as specified and directed. Make : NITCO / NTC / MEHTAB.

M&L for sand filling under floors including watering and consolidation etc complete all as secified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:6 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Rolling and consolidating formation surface in cutting with power road roller exceeding 8 tonne & not exceeding 12 tonne including necessary preparation for surface excavation to required gradient & camber complete all as specified and directed.

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for thermo plastic center or edge line marking of 150/100 mm width (reflective type) of 2.0 mm thickness of uniform finishing in single coat using "HOT MARK" thermoplastic modern propelled road marking machine conforming to BS 3262 (Part-I) 1989 on bituminious surface in white / yellow / red colour and super imposed with glass slam beats including cleaning of surface by removing all dust dirt oil grease etc on bituminious surface, complete all as specified and directed.

S&F in repair convex mirror 1000mm dia made of PC material provided with suitable MS pipe post of 75 mm dia medium grade with 3 Mtr long, duly powdered coated/painted as per site requirement, clear & definite mirror, image having 130 degree of viewing angle, unbreakable and stronger than glass including excavation and PCC 1:2:4 using 12.5mm graded aggregate (size of post holes = 450mm x 450mm x 600mm) complete all as specified and directed. Make : Sinor / Dark Eye / 3M Road Knight / Avery Dennison Road Sign / Greenlite.

S&F in repair for cat eyes (Road Stud), of size (90mm x 110mm x 17mm Approx) ,made of polycarbonate with electronically welded prismatic retro-reflective lens on both side for maximum retro-reflection in wet and dry conditions, non breakable, dustproof type, fixed with epoxy chemical, cement and hardner, complete all as specified. Make : Tata BP / Dark Eye / 3M India Ltd/ Greenlite.

M/s Ravindra Singh Tomar

M/S DHARMENFRA SINGH TOMAR

RADHIKA DEVELOPERS

Shapers Constructions Limited