PROVN OF CHEQUERED TILES PATH WITH COVERED SHED TO BLDG NO P 177 SHED CHDH 02 AND SPL REPAIR INCL ADDN ALTN OF STREET LIGHT UPTO 2 DET AT GE GANGTOK

Amount

SCHEDULE 'A' (B/R WORKS) Surface excavation n exc 30 cm deep and averging 15 cm deep and getting out in soft/loose soil complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point complete all as specified and as directed.

M&L for hardcore of guage n.exe 0.63mm with broken stone or boulders deposited, spread and levelled in layer n.exe 15 cm thick watered and rammed to a true surface complete all as specified and directed

M&L for lacquer coated coloured chequred cement concrete tiles of size 200mm x 200mm x 25 mm/ 300 x 300mm x 25 mm thick as in pavement/footpath/trade/riser, set and jointed in neat cement slurry and pointed with grey cement and pigment laid over and including screed bed/bedding layer of 15mm thick in cement mortar (1:4) complete all as specified and as directed

S&F rolled section as in main and cross beams hip, jack rafters, hollow section purlins, where connected to common rafter and running rails and guides for slidding doors fixed with angle cleats or other connecting plates of grade Fe-410, complete all as specified and directed

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces of any description over 10 cm in width or girth including preparation of new steel surfaces complete all as specified and directed

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile stregth of 550 mpa as in roof covering fixed with self tapping screws complete all as specified and directed

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick of any colour having tensile stregth of 550 mpa as in roof covering fixed with self tapping screws complete all as specified and directed

Excavation in trenches not exc. 1.5 metre wide and not exc 1.5 metre in depth and getting out as in soft/loose soil for foundation etc complete all as specified and directed

Use and waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttress etc vertical or to better in rough finished surfaces complete all as specified and directed

M&L PCC 1:3:6, type C-2 (using 40mm graded aggregate) as in foundation,retaining wall etc complete all as specified and directed

M&L for 100mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in hardstanding/flooring/Path etc and finishing the surface even and fair etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on other than fair faces of stone masonry, finished even & fair with using cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coat of cement base paint over a coat of alkali-resistant priming paint on wall complete all as specified and directed.

Returning, Filling in, including Spreading, Levelling, Watering and well ramming in Layers not exc. 25 cm in Soft/Loose Soil, complete all as specified and as directed.

Supply, laying, jointing and testing in trenches or passing through pipe, 1100 volts grade XLPE insulated screened, PVC bedded, glavaniszed steel strip or wire armoured LT electric power under ground cable conforming to IS:7098 (Pt-I)-1988, heavy duty with aluminium conductor of cross sectional area 10 Sqmm 2 Core with necessary fixing arrangements such as lungs, glands and terminal etc complete all as specified and as directed.

Supply and laying DWC pipe SN-4 with coupler 50mm OD, ISI marked along with all accesssories like socket bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc laid in trenches/ fixed to pole/laying under road crossing/fixed on pavement walls with clamps complete all as specified and as directed

Supply and laying 50 mm bore GI pipe light grade including fittings fixed to pole/laying under road crossing with clamps complete all as specified and as directed.

M&L for PCC 1:2:4 type B0(using 12.5 mm graded stone aggregate) as in coping and other similar bends including weathering, sligthly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed.

M&L for mild steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 meter long) including painting as per rule and all as speicified and directed.

S&F LED street light fitting 60 watt 230V AC outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrison risistant including thermal management in multiple optics complete with IP 65/66 protection and impact resistance of IK07 complete GI bracket 1.5m long incl painting with aluminium paint etc all as specified and as directed. Make Havells Cat Pt No :- ENDURAPEARLNEOSL60WLED757PASYTOPC and equivalent as approved

Supply and fix street light cable junction box made of polycarbonate "halogen free and weather proof" for oudoor installation (with metric knockouts for cable entry) IP-66 protection including short cable entry gland thread type with lock nut, four way terminal, GI flat strip clamps of size 25mm x 3mm with bolts, nuts and washers for fixing with MCB one 06 AMPs inside the junction box complete all as specified and as directed. (Make: HENSEL Cat No KF-1616B or equivalent model of Havells/Sintex)

Supply and fixing 1.5 Sqmm 3 core, 240 Volts copper conductor cable heavy duty PVC insulated, round sheathed ISI marked in PVC conduit all as specified and directed by Engr-in-Charge

Supply and fixing LED solar street light fitting 36/40 Watt including galvanized steel pole in built, lithiumion battery solar panel, charge controller with dusk down sensor complete. (Excavation & earth work shall be measured separately) all as directed.Make Havells Cat No SOLAR AIO ALFA 40 W or ewquivalent as approved.

S&F street light panel Conforms to IS/IEC 60947-4-1,Provided with Protection Degree IP 54,consisting of digital programmable and astronomical time switch with MCB rating 40A ,contactor rating 32Amp TP,TPN,maximum load 6 kw , prewired with all accessories fixed to pole with MS clamp 40 x 5 mm all as speicifed and directed Make : Havells Cat No - IHXTS0306A or equivalent as approved.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less tha 2.25 mtr deep below gorund level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continous earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 MES SSR Part-I 1991 print and as directed.

KAMLESH ENTERPRISE

M/S S. S CHETTRI AND SONS

BIJAY MITTAL

Phurba Wangdi Sherpa

DHARMINDER SINGH

M/S MANOJ VERMA

MAHENDRA KHAWAS