Girls Toilet at Middle School Labarpeth Fisherman Colony

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil:

P/L, of dry stone soling duly hand packed for foundation and backfilling with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement: 4 coarse sand: & graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size).

Supply & laying of GSB under floors in trenches, plinth, sides of foundations etc consolidating each layer by ramming, watering, compacting, all inclusive leads, lifts, loading, un-loading, cost and carriage of material all complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl.

Providing and fixing of MS Sheet door/ventilators with angle iron shutter frame fixed with plain MS sheet including all necessary fittings/Hardware items and steel primer/painting coat as required all complete job.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15", landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:11:3 (1 cement: 1 coarse sand: 3 graded stone aggregate 20 mm nominal size) complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upta/above plinth level Thermo-Mechanically Treated bars of grade Fe 5000 or more including all carriage involved complete

Cement concrete flooring 1:2:4 (icement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate incl. carriage complete

15mm Cement plaster on the rough side of single or half brick wall of mix: 1:4(1 cement: 4 fine sand) incl scaffolding all complete.

Cement plaster of mix: 1:6(1 cement: 6 fine sand) incl. scaffolding complete

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete, Ramps, steps.

Suspended floors. bors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls

Providing and placing on terrace (at all floor levels) polyethylene water storage tank (3): 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes conforming to 15: 15801, UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. job incl all necessary PPR Fittings 25mm dia nominal bore

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes conforming to 15: 15801, UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. job incl all necessary PPR Fittings 15mm dia nominal bore

Providing and fixing testing and commissioning PVC SWH pipes jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in rec brick work and making good the floors beams, and walls cement mortar where required complete of outer diameter. Type & incl all necessary fittings 100mm PVC.

Providing and fixing testing and commissioning PVC SWH pipes jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in rec brick work and making good the floors beams, and walls cement mortar where required complete of outer diameter. Type & incl all necessary fittings 75mm PVC.

Providing and fixing of PVC fittings for PVC pipes of approved quality and make (prince B type) Plain Bend

Collar

Door Bend

Plain Tee

P Trap

PVC Cliff

Door Tee

Floor Trap

Cowel Cap

PVC Elbow

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS: 8931 all complete.

Providing and fixing 15mm dia nominal bore C.P Brass Angle Valve

Providing and fixing PTMT liquid soap container

P/F stainless steel Jali (Grattings) with or without hole for waste pipe for N-Trap weight not less than 70 gms

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with IS! marked white solid plastic seat and lid.

Providing and fixing of C.P fittings of approved quality and brand Jaguar/Hindware or equivalent brand with all fixtures complete wall mixer/Basin mixer

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic mould frame of approved make and shade with 6 mm thick hard board backing Rectangular shape

Providing and fixing of wash basin white viterious china of required size and standard quality cera, parrayware, hindware with white vitreous china pedestal as required incl. Size 550×400 with 15mm CP Brass fitter taps incl. China pedestal with all necessary fittings all complete

Laying of electric PVC Pipes 1" dia in slabs incl. P/F of DP box for ceiling lights and fan box during construction w before electrification (for one slab and conduit pipes for walls all complete job.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as ap by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (10 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mi pigment of matching shade complete

Providing and laying vitrified floor tiles antiskid with different sizes (Thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming 15: 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) incl. grouting the jointing with white cement and matching pigments etc. complete

providing and applying of 2mm thick white cement based putty/POP of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with acrylic smooth exterior paint of required shade on New Work (Two or more coats applied @1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Carraige of Material: Coarse aggregate for lead of 10kms Coarse aggregate for an avg. lead of 14kms

Carraige of Material: Coarse aggregate for lead of 10kms Sand for an avg. lead of 14kms

Carraige of Material: Coarse aggregate for lead of 10kms Bricks for an avg. lead of 50 Kms