REPAIR PLASTERING AND PAINTING OF PERIMETER WALLS OF STATION AND COMPOUND WALL OF WSA UNDER GE AF SRINAGAR

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed.

Preparation of new surface of wall and applying two coats of cement base paint over one coat of primer, complete all as specified and directed.

Preparation of old plastered /unplastered wall surfaces by washing down, brooming down, steel wire brushing and removing all grass, vegetation or shrubs from wall and roof etc. and applying one coat cement base paint including scaffolding upto 15m height, complete all as specified and directed.

M&L for plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates), as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for 10 to 12 mm thick 3D exterior wall tile in stone/bulging/ approved shade from meteor series/matt finish as approved, area of each tile exceeding 0.08 Sqm but not exceeding 0.18 Sqm in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling of existing finishes, complete all as specified and direction.