PERIODICAL SERVICES AND B/R REPAIR TO MES INSTALLATION AND REPAIRS TO DRAINS, FOOTPATH, CULVERT, COMPOUND WALL AND BARBED WIRE FENCING AT DINJAN UNDER GE DINJAN

Amount

M & L preparation of old decorated surfaces of walls and applying one coat of white wash complete as specified and directed.

M & L preparation of old decorated surfaces of ceiling and applying one coat of white wash complete as specified and directed.

M & L preparing of old decorated surfaces of walls and applying one coat of distemper oil-emulsion Over a coat of chalk whitenning complete as specified and directed.

M & L preparing of old decorated surfaces of walls and applying one coat of cement based paint over a coat of alkali resistance primer complete as specified and directed.

M & L preparing of old decorated surfaces of over head tank wall and applying one coat of cement based paint including scaffolding upto 30mtr of height complete as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of newly plastered surfaces.

M & L two coats of distermpering walls with distemper oil emulsion over a coat of chalk whiting on newly plastered wall surfaces including preparation of surfaces.

M & L preparing of new surfaces of walls and applying two coat of cement based paint over a coat of alkali resistance primer complete as specified and directed.

Supply only integral water proofing compound for external plaster. (Make : Sika/Cico).

M & L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

M&L for prepolished machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) and disposing off the rubbish materials

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm(300x300x7mm),over 20mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L glazed ceramic coloured tiles of size 300X200X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting over & including 10mm thick rendering in CM(1:6) complete all as specified and as directed.

M&L for prepolished chequered cement concrete tiles with white cement and pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry over 15mm thick cement mortor 1:6 in floors as directed

M&L for non skid cereamic coloured Rustic tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18 sqm, in floor/wall etc including 15mm thick screed bed or bedding in cement mortar (1:4) set and joined in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for renewing cement concrete tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles including 15mm thick screed bed or bedding in cement mortar (1:4) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed.

M&L for machine cut kota stone slab 20-25mm thick as in skirting over and including 10mm thick cement mortar in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm n.exc 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any descrption n.exc 1 sqm each as directed.

All as per item No 23 above but exc. 1 Sqm and n.exc. 2 Sqm each.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21

S&F, 125 mm aluminium handles cast type, anodised complete all as specified and as directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified.

S & F as in door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and confirming to Steel Fe-290(Gde E-165) fixing complete.

S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed (pcc filling of holloow section measured and paid seprately)

S&F pressed steel door frame 105x60 mm for doors/window with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed (pcc filling of holloow section measured and paid seprately)

S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S & F 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a).

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devotailed or welded.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded.

S&F steel ventilator with centre hung shutter including two pair of brass cup pivots, catch spring and pulley wheel, complete as specified and directed.

S&F for mild steel window guard bars, plain, let in and fixed independently in wooden frames, Lor T section, supports for shelves etc., and similar articles conforming to Fe 290 Gde E-165 including drilling holes complete all as specified and directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete as specified and directed.

S&F sheet glass 3 mm thick ordianary quality and galzing with wooden beads or oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as direcetd at site.

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor.

Refixing 15mm old steel tubing and connection in new or old position (wall, ceiling, floors, etc.)

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor.

Refixing 20mm old steel tubing and connection in new or old position (wall, ceiling, floors, etc.)

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and directed

Dismantling water tanks capacity exc 250 ltrs and n.exc 500 ltrs and removing to store.

S & F Rotational moulded poly ethylene water storage tanks 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S & F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt. 210gms).

S&F in repair PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified.

S&F in repairs bib taps 15 mm dia chromium plated with crutch or butter fly handle screwed down for iron pipe or brass ferrule and fixed complete

S & F in repairs Vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets,excluding pillar cock 15 mm bore CP, PVC connection of 450 mm long including PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed.

S & F in repairs, 15 mm bore, bib tap, PTMT (PVC) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches

S&F 110mm bore PVC (SWR) junction with single (T) equal or unequal fitting and jointing to waste pipe

S&F 110mm bore PVC (SWR) bends with oval access door all as specified

S&F 75mm bore PVC (SWR) bends with oval access door all as specified

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Dismantling of Asbestos cement corrugated, semi corrugate etc sheets in roof covering .

M & L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls, etc. and fixed with L type or J-type or cranked hook bolts, complete as specified.

M & L AC two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with L type or J type hook or cranked hook bolt with washer complete as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof covering

S & F 0.63mm thick galvanished corrugated mild steel sheeting with two corrugation side lap fixed with "L" type or"J" type or cranked hook bolts with coach screws and washers in roof, walls etc.

S & F Plain, galvanized, mild steel sheeting 0.63 mm thick is ridges, hips valley gutters drips and straight flashing (length & girth as fixed) with grade of zinc coating 275.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil.

M&L providing RCC type B1 1:2:4 (20mm graded aggregate) in per cast fencing post, average sectional area exceeding 100 Sqcm and not exc 250 Sqcm.

Restraining and resecuring including making good staples etc galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm mdia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing

M & L preparing new plastered surfaces of wall/rcc post and applying two coats of white wash complete as specified and directed.

Dismantling timber boarding, any description, fixed in any position with nails as directed.

S & F 1.0mm thick mild steel plain, black sheet in wall cladding, steel gates, eaves board and similar work, cut to size, holes punched; including round headed sverws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upl mitred angles etc, as required.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc hoisting if required reconnecting and refixing in position exceeding 250 ltrs not exceeding 500 ltrs capacity.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulalting pipes etc exceeding 250 ltrs but n.exc 500 ltrs capacity.

Demolition of brick work or laterite stone masonary built in cement mortar including precast concrete articles.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 all as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and as directed.

Brick work with sub class B bricks straight or curved in plan not exc 6m mean radius built in CM 1:6 as in wall

M & L 15mm thick in two layer (10 mm and 5 mm thick) rendering on fair faces of brick work or concrete surface in CM 1:4 to be finished even and smooth with out using extra cement using WPC as per manufacturer instruction complete alla s specified and directed. Note :- WPC will be paid and measured separately.

M&L for 10mm thick rendering on concrete surface of ceiling in CM 1:4and rendering is to be finished even and smooth with out using extra cement

M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3and rendering is to be finished even and smooth with out using extra cement

M& L for rendering 15mm thick in CM 1:4 on fair faces of brick masonry and finishing even and smooth (without using extra cement).

M&L for PCC type B-1 1:2:4(20mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings upto 60cm in height, coopings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially porvided for complete all as specified and as directed.

M&L for precast cement concrete type B-0 (12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) including floor finishes.

M&L for PCC type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete.

M&L for PCC 40mm thick type B-1, (1:2:4) (20mm graded aggregate) finishing cement concrete surfaces even and smooth all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for PCC type B-1, 1:2:4(20mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings upto 60cm in height, coopings, kneelers, apex stones, bed plates, kerbs as directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion concrete, brick work, masonry work, etc and making good disturbed.

Dismantling fencing wiremesh, any type, any size

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including porvision of binding wire.

Supply only 4mm thick MS galvanised chainlink fencing 40x40mm size all as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed wire with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvinised mild steel wire, staples or steel pins, etc. as directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.;conforming to Fe-290 Gde E-165.

S&F flat iron fillets (for securing chain link fencing etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

S&F mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as item No 102 above but 8 mm dia as in stirrups, spacers and binders

M&L for applying 2 coats of synthetic enamel paint over a coat of red oxide primer surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint all as specified.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces on steel surfaces exceeding 10cm girth or width complete all as specified and as directed.

Mild steel screw bolts(machine made) diameter of neck 5 to 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft/loose soil.

Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as directed.

Returning filling in including spreading levelling watering and well ramming in layers n exc 25 cm in soil complete all as directed.

M&L for cement as in foundation filling, Mass concrete concrete type C2 1:3:6 (using 40 mm graded aggregate) as in foundation and mass concrete complete all as specified and as directed..

M&L for reinforced concrete pipe 600mm bore class NP2 laid and jointed complete with collars all as specified.

M&L for rendering 15mm thick on fair faces of Brick work of concrete surface in cement mortar 1:6 finished fair & even complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying three coat of white wash complete all as specified and as directed.

M&L for 150mm thick cement concrete type B-2 1:2:4 (using 40 mm graded aggregate) as in foundation, Mass concrete complete all as specified and directed.

G S Enterprises & Co

jitendra narayan goswami

M/S HAZARIKA CONSTRUCTION

M/S. NOBIN RAJKHOWA

Shree Trilok Electric Corporation

Construction House