REPAIR TO KERB STONE TILES, ROAD FURNITURE AND POT HOLES UNDER GE (N) MAMUN

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level), removal of rubbish to a distance n exc 100mtr complete all as specified and as directed. Note :-During the process of demolition of existing concrete surfaces, adjacent bituminous surface shall not get any kind of damage. Damages made if any, the same shall made good by the contractor without any extra cost.

Demolition of reinforced cement concrete of any description and in any position not specifically provided for, removal of rubbish to a distance n exc 100mtr complete all as specified and as directed.

Removing demolished material to a distance exc 500 mtr and n.exc 1500 mtr (beyond 100mtr as mentioned under item 1&2 above) and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) complete all as specified and as directed.

M&L for 25 mm thick Sand cushioning under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick factory made coloured (epoxy coated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5 mm) in white cement and non fadable glossy pigment of approved shade of shape and size confirming to IS 15658-2006, M-35 grade complete all as specified and as directed.

M&L for precast PCC solid block (1:2:4) type B1 using 20 mm graded stone agg as in kerb stones, 150 mm width (thickness) of machine made (conform to sample), set in CM (1:6) etc complete all as specified and as directed.

M&L for brickwork with, sub class B bricks straight or curved on plan exc. 6 m mean radius built in CM (1:6) incl demolitiion of existing brickwork complete all as specified and as directed.

M&L for rendering 15 mm thick CM 1:4 on fair faces of brick work or concrete surface finished fair and even without using extra cement complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for PCC type B1 1:2:4 (12.5 mm graded aggregates) as in coping, benching to manholes,water troughs and bed block etc incl necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for pre-cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded brocken stone aggregate) as in cover slab, set in cement mortar (1:4) with plain faces including necessary form work complete all as specified and directed.

M&L Preparation of new concrete surface/stone surface and applying two coats of UV resistant exterior emulsion acrylic antifungal paint over a coat of primer complete all as specified and as directed.

All as per item 14 but on Old concrete /stone surface.

S&F in repairs post delineator made of ABS body fitted with 02 nos 100 mm dia highly reflective acrylic/PMMA reflectors and mounted on mild steel pipe of minium 50 mm dia duly powder coated, ant rust and anti theft steel net including necessary fixing arrangmenet, earthwork, concrete block etc complete all as specified and directed.

S&F in reapir for 600mm dia Polycarbonate Road Security Traffic convex mirror which reflects a clear, bright image with adjustable Bracket is made of weather-resistant PC plastic against frost, heat, high winds and sun light for indoor and outdoor use and including fixing of prepainted factory made pole (min dia 50 mm) with standard height as per site requirement and necessary grouting in PCC block of size 40x40x50 cm ,1:3:6 type C2 complete all as specified and directed.

Hot thermo plastic road marking paint not less than 2mm thick, white or golden yellow in colour, confirming to BS-3262 in lines, arrow, dashes & letters exc 100cm but not exc 15cm in width applied hot, using application unit and retro reflective glass beads @ 250 to 300 gm/ sqm to withstand vehicular traffic load, laid as per menufecturur's instructions etc complete all as specified and directed.Note: Thermo plastic road marking paint shall be of Make: ASIAN/STP Ltd.

Supply and fix yellow or black readymade rubber rumbles speed breaker/ bump with two highly reflective reflectors moulded in PMMA materials are welded/ fitted with ABS Plate through ultrasonic welding process, size of the speed bump, length 500mm width 250mm height 50mm, fixed with epoxy adhesive sealing compound and suitable nuts and bolts as per manufacturers instruction and all as specified and directed.Make: Dark Eye, 3M

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 3250.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

dadwal engineers

PALSON ENGINEERS

M/S DUGGAL CONSTRUCTION CO

M/S NARESH KUMAR SHARMA

M/S GAGAN CONSTRUCTION CO

vivek and co