PROVN OF EXTERNAL SECURITY LIGHTS WITH CONNECTED WORKS ,CHANGE OF ELECTRIC WIRINGING IN ECHS, WATER PIPE LINE FROM EXISTING BORE WELL TO EXISTING PIPE KV-4 AND PROVN OF LIGHTING PROTECTION AT POWER HOUSE AT JAIPUR MIL STN UNDER GE(S) JAIPUR

Amount

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in any type of soil. Job :- 06/REV - 147.00 Job :- KV-4 - 148.00 Job :- 06/SR - 44.00

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil. Job :- 06/REV - 84.00 Job :- KV-4 - 120.00 Job :- 06/SR - 30.00

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point Job :- 06/REV - 63.00 Job :- KV-4 - 28.00 Job :-06/SR - 14.00

M&L for bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified. Job :- 06/REV - 5.00 Job :- 06/SR - 1.20

M & L Sand cushioning to PVC under ground cable with using river bed/tibba sand and jently punning down to provide a required cover. Job :- 06/REV - 40.00 Job :- 06/SR - 12.00

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size following sizes :-

(a) 35 sqmm, 3 1/2 core Job :- 06/REV

(b) 16 sq mm, 4core Job :- 06/REV

Supply & install true vertical position Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) complete comprises the following all as specified and directed by Engr -in charge. (a) Painting of poles with one coat of red oxide primer and one coat of aluminium paint before fixing and one coat of aluminium paint after fixing complete, embedded portion shall be painted with two coat of black bituminous paint all as specified. (b) The portion above coping shall be painted in alternative bands of black & white colour starting with white colour (each band of 30 cm wide) by two coat of synthetic enameled paint upto 1.5 m height . Note :- Excavation / earthwork and PCC will be measured seperately. Job :- 06/REV

M & L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate for foundation of stay assembly / struts / poles etc. Job :- 06/REV - 10.50 Job :- 03/LBW - 1

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work weathering side, finishing fair & even complete. Job :- 06/REV

Supply and fixing of New Generation Energy Saving LED street light: indus-E Series top opening 90 watt. powder coated coted PDC aluminium housing with intgrated lens Polycarbonate cover,SMD LED with integrated lens cover,body with toughened glass, IP 66 protection. Make Crompton ,Cat No LSTP-90-CDL or Equivelent cat part in other makes as per Appendix 'B'. Job :- 06/REV

Supply and fixing of swan nack GI pipe bracket made of 40 mm dia, medium grade, 1.50 mtr long and bend in 120 degree for mounting of street light of suitable size including bracket 2 x FI clamp, nut & bolts and washers of suitable size complete all as specified. Job :- 06/REV

Supply and fixing of thermoplastic, polystyrene unbreakable junction box with transparent lid size 217 x 253 x 115mm out door type with cable contactor for 16 sq mm 4 core cable,suitable for pole mounted outdoor type IP 66 insulated complete with FI clamp & nut, bolts, washers and including phase seperator between R, Y, B terminals and one MCB SP 6 amp 10 KA, all duly mounted on din cannel, cable glands for cable entry. Make : Hensel Cat Part No - KG 9003 IN or Equivelent cat part in other makes as per Appendix 'B'. Job :- 06/REV

M&L earthing complete as per electrical plate No. 5 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 40mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & tested complete. Note 1- Following items deemed to be included in quoted rate (a) Earth electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 meter (c) Material and labour for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcoal dust and common salt as per direction (e) All labour involved including testing of earth network.(f) Excavation and earth work or drilling holes for electrode (g) P.C.C pit and C.I cover (h) Funnel with watering pipe, wire mesh and copper lugs etc as specified (j) G.I. protection pipe pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. Job :- 06/REV

Supply and fixing of 1100 volts grade heavy duty cable PVC insulated copper conductor cable with inner sheathing of pvc tape and overall PVC sheathed in service connection three core stranded copper conductor of size 1.5 Sqmm drawn through steel pole from junction box to street light fitting complete all as specified and directed by Engr-in-charge. Job :- 06/REV

Supply and fixing steel tubing galvanised light grade for passing cable under road floors or fixing to poles for mechanical protection of under ground cable complete with flat iron clamps made of shape and 12 mm dia bolts nuts and washers fixing where required complete all as specified and directed of size 40 mm dia. Job :- 06/SR - 12.00 Job :- 06/REV - 15.00

Labour for boring under road/drain by manual/machine method for inserting GI tubing up to 80 mm dia for cable protection all as specified and directed by EIC. Job :- 06/REV - 10.00 Job :- KV-4 - 25.00

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell/buzzer,bracket light fittings etc(excluding fans and fan regulators) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by directed Engr-In-Charge to match with existing surface. (No Extra cost will be provided for match disturbed surfaces to existing surface. ) Job :- 06/SR

M&L for point wiring using approved colour coding as per IS, with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade (ISI marked) in and including concealed PVC rigid conduit with accessories fixed on surface/ceiling by means of PVC sleeve/dash fasteners with cadmium plated screw and teakwood blocks closed recessed for mounting switch,sockets,regulators etc. including, Mild steel Sunken box, earth dolly with zinc coated and 3 mm thick phenolic laminated sheet top cover including 1.5 sqmm single core PVC insulated and unsheathed copper conductor FRLS cable 1100 V grade (ISI marked) earth continuty conductor to common earth and connected as continuous earth wire to earth dolly compiete all as sprcified and ditected for followings :-. (Note: Cost of hole cutting in wall for bell point, bulk head, building security light and any other site requirement during work execution shall be inclusive in above quoted price). Job :- 06/SR

One light/fan/ bell point controlled by one, one way switch

One 3 pin 5 Amp socket outlet on the same board with other switches

One 3 pin 5 Amp socket outlet on independent board with other switches

One light point controlled by two, two way switches

All as per item No 20.00 above but Point wiring with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed. Job :- 06/Sr

All as per item No 20.00 above but Point wiring with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed. Job :- 06/SR

S&F of switch, piano type flush/ Bell push button type 230/250 volts ISI marked,complete all as speified and directed of following:- Job :- 06/SR

Single pole , one way 5/6Amp rating

Single pole, One way 15/16 Amp rating

Two Pole, two way 6 amp rating

Bell Push One way 5/6 Amp Ratings

S & F Socket outlet Piano type 230/250 Volts 2 in 1,3 pin 5/6 Amp Ratings Job :- 06/SR

S & F Socket outlet Piano type 230/250 Volts 2 in 1,3 pin 15/16 Amp/5 Amp combination Ratings Job :- 06/SR

S & F stepped type electronics fan regulator flush type AC 230 volts single pole (ISI marked) for AC 230V, 50 Hz on laminated sheet complete all as specified and directed. Job :- 06/SR

S&F Ceiling rose surface bakelite 65x50mm, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified and directed by Engr-in-charge. Job :- 06/SR

S & F lamp holder angle type PVC/Polycarbonate type with cord grip cap insulated body with back plate for pendant fitting including 10 Watt LED Lamp complete all as specified and directed Job :- 06/SR

S & F electric bell multi music type AC 230 volts single pole (ISI marked) for AC 230V, 50 Hz ding dong type complete all as specified and directed Job :- 06/SR

Supply & Fix surface mounted LED downlighter in power coated white finish with integrated electric driver, LED fittings 1X 12 Watt complete with all accessories pre wired twin core twisted copper wire with suitable size. Make: CG Cat Part No. LCRP-20 NW or Equivelent cat part in other makes as per Appendix 'B'. Job :- 06/SR

Supply & fixing in repairs Energy saving environmental friendly, Trim Line LED Batten Tube Light fittings 18/20/22 Watt ,1200mm(4 feet) TL, long life, impact proof,surface/wall mounting IP20,100 Lm per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL & all as specified and directed by Engr-in-charge. Make - CG cat Part No. LDL-20-CDL or Equivelent cat part in other makes as per Appendix 'B'. Job :- 06/SR

Supply & fixing in repairs Energy saving environmental friendly, LED Batten Tube Light fittings 10/12 Watt ,600mm(2 feet) TL, long life, impact proof,surface/wall mounting IP20,100 luminaire per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL & all as specified and directed by Engr-in-charge. Make -CG cat Part No. LDL-10-CDL or Equivelent cat part in other makes as per Appendix 'B'. Job :- 06/SR

Supply and Fix 10 Watt LED IP-65 Bulkhead environfriendly ultra modern energy saving surface mounted decorative hexagon bulkhead back lit LED luminaire comprising of high brightness LEDs wall mounted complete with all accessories pre wired twin core flexible copper conductor of suitable size. Make: CG cat PartNo. LBHP-10-CDL or Equivelent cat part in other makes as per Appendix 'B'. Job :- 06/SR

M & L for sub main wiring with 2 runs of 6 sqmm single core multi stranded copper conductor PVC insulated but unsheathed cable 1100 Volts grade drawn through and including PVC rigid conduit including with all conduit accessories fixed on wall/surfaces including 6.00 sqmm PVC insulated multistranded copper earth contuinity conductor including taking down old unserviceable sub main wiring complete all as specified and directed.( Note: Cost of hole in wall for any purpose to provide connection in Panel/DBs as per site requirement will be inclusive in unit quoted Rate. Note :- 2 run of 6 sqmm + one run of 6 sqmm earth and 1 RM conduit will be measured one unit. Job :- 06/SR

M & L for sub main wiring with four runs of 10 sqmm single core multi stranded copper conductor PVC insulated but unsheathed cable 1100 Volts grade drawn through and including PVC rigid conduit including with all conduit accessories fixed on wall/surfaces including 2 runs of 10.00 sqmm PVC insulated multistranded copper earth contuinity conductor including taking down old unserviceable sub main wiring complete all as specified and directed.( Note: Cost of hole in wall for any purpose to provide connection in Panel/DBs as per site requirement will be inclusive in unit quoted Rate. Note :- 4 run of 10 sqmm + 2 run of 10 sqmm earth and 1 RM conduit will be measured one unit. Job :- 06/SR

Supply, laying & testing in repair cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 25 sq mm including taking down old unserviceable cable complete all as specified and directed. Job :- 06/SR

supply and fix TP&N sheet steel power coated double door vertical distribution board 08 way fitted with two cover one screwed cover for incoming and outgoing MCBs and second for protection of MCBs fitted with colour coated Bus bar neutral link earth bar Din rail suitable for use of 240/415 Volts 50 Hz supply of protection IP-42 including on incomming MCCB 100 Amps Ratings 4 pole 01 Nos, MCB DP 63 Amps ratings 08 Nos. and RCCB 01 Nos. complete all as specified and directed. Make: HPL cat Part No. DBVDD08163 or Equivelent cat part in other makes as per Appendix 'B'. (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above item quoted price.) Job :- 06/SR

Supply and fix factory made sheet distribution board double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar of under mentioned ratings: (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above item quoted price.) Job :- 06/SR

SP & N 12 ways

SP & N 8 ways

Supply and fix MCB 10 KA conforming to IS-8828 : 1996 : IEC-898 : 1995 rupturing capacity of the under mentioned type and rating: Job :- 06/SR

SP 5 to 32 Amps rating

SP above 32 to 63 Amps rating

TPN 100 Amps 10 KA ratings

material and labour for removing tiles/hardstatnding for excavation and Refix tiles again on same place after excavation with proper surface preparation, cleaning & dressing and PCC work complete all as specified and directed. Job :- 06/SR

M&L for earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed as well as testing included. Note 1- Following items deemed to be included in quoted rate (a) Earth electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 meter (c) Material and labour for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcoal dust and common salt as per direction (e) All labour involved including testing of earth network.(f) Excavation and earth work or drilling holes for electrode (g) P.C.C pit and C.I cover (h) Funnel with watering pipe, wire mesh and copper lugs etc as specified (j) G.I. protection pipe pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. Job :- 06/SR

Supply and fix Valve gun metal, globe or gate valves of 50 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. Job No :- KV-4

Supply and fixing, laying & testing GI steel water tubing 50 mm bore medium grade galvanized including all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches etc also for cutting , screwing and waste and for making forged bends on piping as required for laying in trenches or fixed to wall etc complete all as specified and directed. Job No :- KV-4

Material and labour for taping/drilling boring of existing DI/CI pipeline and threading for fitting of tee connection of 50 mm dia GI pipeline including connected items as specified and directed. Note :- Rate shall be inclusive of excavation/earthwork and GI fitting as required viz tee, elobow, connection piece, reducer etc. Job No :- KV-4

Material and labour for construction of brick masonry valve pit chamber suitable for 50 mm dia. Pipe line and 50 mm gate valve maintenace purpose including cover of valve pit chamber and handle to open cover of valve pit duly paint with two coat of enamel paint. All other dimensions of 450 x 450 x 450mm size (internal dimension) and specifications will be as per requirement and specified by engr- in -charge. (TD Drg No TD/2004/26 sheet No 1/3 to 3/3) Job No :- KV-4

S & F of air terminal of OPR-60 (time gain 60, weight not less than 2.4 kg and length 0.215m) Early stremer Emission (ESE) lighhtening protection air terminal with NFC-17-102 standards complete. Make -ABB cat Part No. 2CT8899800R7100 or Equivelent other approved make. Job No :- 03/LBW

S&F Stainless steel mounting mast of 3 meter height with guy wire and suitable base plate (weight not less than 6.5 kg) should have been provision for proper fixing of mast including PCC work for grouting of mast on roof all as specified and directed by Engr-in-charge. Make -ABB cat Part No. H00003003LGB or Equivelent other approved make. Job No :- 03/LBW

S&F of lightening stroke (flash) counter working electro mechanically with out any power supply equipment should count lightening strokes of 0.4 Ka to 150 KA complete. Make -ABB cat Part No. 2CTH0CF2004 or Equivelent other approved make. Job No :- 03/LBW

Supply and fix of single core PVC insulated unarmoured 70 sqmm copper cable down conductor with suitable mounting accessories for earthing conductor/lead all as directed by engr-in-Charge. Job No :- 03/LBW

M&L earthing complete as per electrical plate No. 5 of MES SSR Part-I with copper plate 600x600x3.15 mm , buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including copper strip 20mm x 3mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 40mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & tested complete. Note 1- Following items deemed to be included in quoted rate (a) Earth electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 meter (c) Material and labour for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcoal dust and common salt as per direction (e) All labour involved including testing of earth network.(f) Excavation and earth work or drilling holes for electrode (g) P.C.C pit and C.I cover (h) Funnel with watering pipe, wire mesh and copper lugs etc as specified (j) G.I. protection pipe pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. Job No :- 03/LBW

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in coping including form work weathering, champhering, finishing even & fair surface complete. Job No :- 03/LBW

JAGDAMBA CONSTRUCTION COMPANY

M/S TRADE LINKERS