Reconstruction of road from NH-36 to PCA road via Samding Bey

Amount

Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness. (I)By manuals means. B. In the area of non thorny jungle.

Scarifying Existing Granular Surface to a Depth of 50mm by Manual Means (a) Manual means Scarifying existing granular surface to a depth of SO mm and disposal of scarified material with a lift upto 3 m and leaqs upto 1000 m as per Technical Specification Clause 301.4.

(2) WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to flll­ up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (A) By Manual Means

(3) WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rollingwith smooth wheel roller 80•100 kN In stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate,watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means

Prime coat. (ii) Medium porosity ..Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502

ii )Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Semi - Dense Bituminous Concrete {Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. gra de, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. A. With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification) (I) (i) with 60/70 or VG-30 grade bitumen for Grading -I (13mm nominal size)

Traffic Signs : Direction and place Identification signs with size more than 0.90 sqm size Board (ii)

Retro reflectorised Traffic sign:- providing and erecting of Retro-Reflectrorised cautionary, mandatory & imformatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3 fix over aluminium sheeting 2mm thick fixed on angle Iron of 25x25x4mm supported on a mild steel angle iron post 75x75x6mm firmly fixed to the ground by means of properly design foundation with M-15 grade cement concrete 45x45x60cm below ground level as per approved drawing and sign(all the steel work must be TATA/SAIL/ or any other approved brand). as per drawing and technical specification clause 801. 900mm equilateral triangle

600mm equilateral triangle

600mm circular

800mm x 800mm rectangular

Providing and laying of hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beds @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beds as per IRC 35 . The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSRT &H specification

Kilometer Stone : RCC M15 grade boundary pillars/ local stone of standard design as per IRC 8 fixed in position including painting and printing etc as per drawing and technical secification clause 1703 ii) Ordinary Km Stone (Precast)

Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting ijie saplings, backfilling the trenches, watering , fixing the tree guatrd and maintaining the plants for three year.

Mintu Bora