WBPWD/SEHEC/NKHED/NIQ57/18-19

Amount

Withdrawing the various sizes ie ( 4C x 400 Sq mm , 4C x 300 Sq mm , 4C x 240 Sq mm , 4C x 185 Sq mm , 4C x 150 Sq mm , 4C x 95 Sq mm , etc ) 1.1 KV Gr Al. armoured PVC/XLPE cable from digging the soil / UG as per requirement

Checking testing the cable ends of the above 1.1 KV Gr Al. armoured PVC/XLPE cable by testing instrument & other tools, tackles as per direction of EIC

Temporary Jointing of the 1.1 KV Gr ( 4C x 400 Sq mm , 4C x 300 Sq mm , 4C x 240 Sq mm , 4C x 185 Sq mm , 4C x 150 Sq mm , 4C x 95 Sq mm , etc ) Al. armoured PVC/XLPE cable incl S & F rubber mat as a insulation with wrapping the non addesive tape and ultimately cover the joint by PVC pipe also finally cover with non addesive tape like jointing kits as reqd to complete the temporary joint and place the same on UG trench as reqd for uninterrupted power supply arrangement at the various location with -in the complex of hospital as per direction of EIC

Laying of one cable above 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

Laying of one cable upto 150 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

Laying of cable above 4 core 150sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting

Laying of cable above 4 core 90 sqmm and upto 4 core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting

S & L of following sizes 1.1 KV Gr Al. armoured XLPE cable [make: Havells / Gloster / Polycab / RR kabel / Crystal] through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand

4C x 400 Sq mm

4C x 300 Sq mm

4C x 240 Sq mm

4C x 185 Sq mm

4C x 150 Sq mm

4C x 95 Sq mm

S & L of following sizes 1.1 KV Gr Al. armoured XLPE cable [make: Havells / Gloster / Polycab / RR kabel / Crystal] on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

4C x 400 Sq mm

4C x 300 Sq mm

4C x 240 Sq mm

4C x 185 Sq mm

4C x 150 Sq mm

4C x 95 Sq mm

Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (make Raychem/ M- seal / Havells)

4C x 400 Sq mm

4C x 300 Sq mm

4C x 240 Sq mm

4C x 185 Sq mm

4C x 150 Sq mm

4C x 95 Sq mm

S& Laying of 100 mm dia schedule 80 PVC pipe make [ Finolex / Ashirbad / Supreme ] as per direction of EIC

S & F of compression type cable gland & Finishing the end of following XLPE/PVC armoured cables to comp. the job as per GS

4C x 400 Sq mm

4C x 300 Sq mm

4C x 240 Sq mm

4C x 185 Sq mm

4C x 150 Sq mm

4C x 95 Sq mm

Terms and condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability period 1 (One) Year

(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)

THE INDIAN OVERSEAS TRADING COMPANY

M/S N. C. HORE