SPECIAL REPAIR TO BUILDING NO P-119

Amount

Demolition of unreinforced cement concrete in floors and pavings n exc 15 cm thickness (above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position (sunken floor) not otherwise specifically provided for and disposing the debris out side defence land , complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and disposing the debris out side defence land , complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

All as per item No 8 above but exc 1.5 sqm and n exc 4.00 sqm complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n. exc 2 sqm each complete all as directed.

Taking down shutters of any description exc 1.0 sqm and n. exc 2.0 sqm each and refixing in same opening after necessary resecuring or easing and adjusting complete all as specified and directed.

Dismantling of boarding any description fixed in any position with nails complete all as directed.

Taking up or down steel water tubing and connections 20 mm bore complete all as directed.

All as per item 13 above but 25mm bore complete all as directed.

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and directed.

Keyed pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto course complete all as specified and directed.

Removing shrubs/vegetation upto root ,at any height up to three storey ,from the wall/beam/roof/chajja etc and filling the holes with Plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) of minimum size 15 cmx15 cm x15 cm or as required and making good surface complete all as directed.

Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as directed.

50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR Part II. complete all as directed.

30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR Part II. complete all as directed.

Cutting holes in stonewalls of Exc one but not Exc two stone thick built in cement mortar complete all as directed.

Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in bed blocks, coping etc including necessary form work and complete all as specified and directed.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Plain solid straight chowkets and frames of second class hard wood, wrought, framed rebatted on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

30 mm thick Second class hard wood Glazed and skeleton shutters, for windows and doors open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etcsizes of members of shutters as specified in SSR in SSR Part I, section 8, clause 8.24(b); supply and fixed to chowkats complete all as specified and directed.

25mm thick Prelaminated particle board exterior grade, grade 1 type 1, PLB II confirm to is 12823:2015 prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

All as per item No 28 above but 18/19mm thick Prelaminated particle board complete all as specified and directed.

30mm width continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

Stainless steel towel rail 600mm long complete all as specified and directed. Make : PRAYAG, Cat No BA-IS

Supply and fixed in repair stainless steel curtain rod/ drapery of with all brackets, rings including all accessories of 19/20mm dia complete all as directed. Make : VISTA ROAYAL SOFIO-II

5.5mm thick sheet glass ordinary quality type n.exc 0.5sqm each pane complete all as specified and directed.

Butt hinges,100 mm size medium weight, cold rolled mild steel complete all as specified and directed.

150 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

200 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

100mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

100mm Hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Floor door stopper 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Two coat of synthetic enamel paint over one coat of pink primer after preparation of new or previously untreated wooden surface of any description, not otherwise described, over 10cm width or grith complete all as specified and directed.

Preparation of old wooden surface and applaying one coat of synthetic enamel (ordinary tint). complete all as specified and directed.

Cleaning the roof surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm

Rendering 15mm thick on fair faces of brick work or Concrete Surfaces of roof in CM (1:3) finished even & smooth without using extra cement with integral water proofing compound (water proofing compound shall be 3% weight of cement) Note : Water proofing compound will be measured and pid separately under relavent item.

Taking down cement plaster on brick/ concrete surfaces incl taking out joints hacking for key scrubbing down iwht water and removing rubbish of the MD Land complete all as directed

Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:3 with mixing of water proofing compound and finished even and smooth without using extra cement (Water proofing compound shall be 3% weight of cement). Note : Water proofing compound will be measured and pid separately under relavent item.

Integral waterproofing compound all as specified and directed.

Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat for sunken floor treatment all as specified and directed.

PCC 1:5:10, Type E2 (40 mm graded aggregate ) in foundations, filling and mass concrete in sunken floors complete all as specified and directed.

Supplying and laying of 40mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors (spout) complete all as specified.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor., fixed in repairs complete all as specified and directed.

PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed.

Vitreous china wash basin white size 500x 400 as approved including 32mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms), waste pipe low density polyethylene pipe 32mm bore and brackets fixed in repairs complete all as specified and directed.

Supply and Fixed in repairs PVC Connection 15mm dia with PTMT nuts of length 450mm.

PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Supply and Fixed in repairs 25 mm Gun-metal, globe. or gate valves with iron wheel head, screwed both ends for iron pipe fixed to Pipe. complete all as specified and directed.

Supply and Fixed in repairs 15mm Bib tap standard of chromium plated high pressure screwed for iron pipe or fixed to CPVC pipe complete all as specified and directed. Make : PRAYAG Cat No 6506 or equivalent in specified makes.

Supply and Fixed in repairs 15 mm Pillar taps of chromium plated high pressure screwed for iron pipe or fixed to CPVC pipe (Minimum weight 110 gms) complete all as specified and directed. Make : PRAYAG Cat No 6502 or equivalent in specified makes.

Supply and Fixed in repairs 15mm bore Stop valves ofchromium plated high pressure screwed for iron pipe or fixed to CPVC pipe complete all as specified and directed. Make : PRAYAG Cat No 6510 or equivalent in specified makes.

500mm x 400mm mirror cabinet fixed to walls complete all as specified and directed. Make : PRAYAG Cat No 556 or equivalent in Shakti/ Commandar.

Supply and fixed in repair 15mm size, chromium plated over head shower to pipe complete all as specified and directed. Make : PRAYAG Cat No BS-65 or equivalent in specified makes.

Stainless Steel Soap Dish Tray omplete all as directed. Make : PRAYAG Cat No BA-45 or equivalent in specified makes.

Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

All as per item No 66 above but 25mm dia bore.

Supply and Fixed in repairs 110mm bore PVC (SWR) Pipes single socketed in any length with rubber ring fixed to walls complete all as specified and directed.

Supply and Fixed in repairs 75mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in floors complete all as specified and directed.

Supply and Fixed in repairs 75mm bore PVC (SWR) Pipes single socketed in any length with rubber ring fixed in wall complete all as specified and directed.

Supply and Fixed in repairs PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and directed.

Supply and Fixed in repairs PVC (SWR) branch piece of 75mm bore, single (single Y) equal or unequal complete all as specified and directed.

Supply and Fixed in repairs PVC (SWR bends) 110mm dia provided with access doors complete all as directed.

Supply and Fixed in repairs PVC (SWR bends) 75mm dia provided with access doors complete all as directed.

Supply and Fixed PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as direceted.

Cast iron work grade FG 150 for articles n exc 5 kg each, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and direceted.

Stainless steel wall hanger fixed to wall/doors with necessary nails/screws to hold in position complete all as specified and directed. Make : PRAYAG Cat No BEA 30 or equivalent in specified makes.

Sinks with drainage board made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed Make : PRAYAG Cat No 1239DM or equivalent in specified makes.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc. 250 and not exc 500 ltrs and dirts from mouths of circulating pipes, etc.

Non - skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Glazed coloured ceramic tiles in vertical surface 350x250x7 mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

Precast cement concrete, 1:3:6 type C1 (20mm graded stone aggregate), block masonry with solid blocks, C-5 grade exc. 10 cm in width and set in CM 1:6 complete all as specified and directed.

Providing precast cement concrete 1:3:6 type C1 (20mm graded stone aggregate)solid building blocks of grade C-5, 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:6, complete, in walls all as specified and directed.

Rendering 20mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6,Surfaces even & smooth without using extra cement complete all as directed.

Rendering 15mm thick on brick / concrete surfaces in CM 1:4 finished even and smoooth without using extra cement complete all as directed.

Applying Two coat of oil bound distemper over a coat of chalk whitening primer on newly plastered surface of wall including necessary prepartation complete all as directed.

Complete removal of existing treatment and applying Two coat of oil bound distemper over a coat of chalk whitening primer including preparation of surfaces on wall surfaces all as specified and directed.

Complete removal of existing treatment and applying three coats of white wash including preparation of surfaces on wall surfaces complete all as specified and directed.

Rendering 10mm thick on fair face of brick work or concrete surfaces of ceiling in CM (1:3) finished even & smooth without using extra cement complete all as directed.

Preparation of newly plastered surface of ceiling of any description over 10 cm girth or width, not otherwise described and applying three coat of white wash complete all as specified and directed.

Preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

Complete removal of existing treatment and applying two coat of cement based paint on wall surfaces after preparing newly plastered surface of wall including necessary chalk whiting priming complete all as directed

100mm thick cment concree 1:4:8 type D2 (40mm graded aggregate) as in sub base and pavings finished even and smooth without using extra cement complete all as directed.

10mm thick vitrified heavy duty full body paving tiles matt finish 300x300mm size in pavings/ staircase over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over 20mm thich screed bed in cement mortar 1:6, complete all as directed.

75mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in plinth protection and pavings finished even and smooth without using extra cement, complete all as specified and directed.

Cement concrete 1:2:4 type B2 (40mm graded aggregate) as in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and includes portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed.

Anodised powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Anodised aluminium with powder coated windows sliding windows frame with jointing clat for fixing etc and aluminium anodized skelton/ glazed windows and shutter of 02 No glazed shutter and 01 No wire mesh shutter fixed with glass or gauge sliding type on three track frame without sash bars using standard aluminium section (shutter section weight not less than 0.45kg/RM) incl necessary jointing cleats, glazing clip, rubber packing, anodized aluminium snap, beading screws, anodized aluminium fittings such as handles stainelss steel adjustable friction stay hinges etc complete all as specified. Note : Unite rate includes cost of rubber beading, fitting such as handles, SS friction stay hinges and fixing of glass/ SS wire mesh etc

S&F Aluminium powder coated ventilators with frame suitable for top portion with fixed wire mesh and lours with with glazing, bottom portion with fixed glass incl jointing cleat for fixing glass, wire mesh etc incl necessary jointing cleats, glazing clip rubber packing anodized aluminium snap beading screws complete all as directed. Note :Unite rate includes cost of rubber beading, fitting such as handles, SS friction stay hinges and fixing of glass/ SS wire mesh etc

S&F Aluminium powder coated grill of no DG-104 as per drg no. TD/531 sheet 1/1 shall be riveted to panel of window frame where specified and directed.

S&F 1mm thick stain less steel kitchen plate rack of size 0.80 x 0.9 x 0.25 M all and weight not less than 6.5 Kg as specified, approved & directed by Engineer-in-Charge.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, fans etc and making good distrubed surfaces of wall, floors, etc complete all as directed.

Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor FRLS 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic grey conduit on surface conforming to IS-9537 with all accessories including PVC/MS terminal boxes fixed on wall with 3mm thick masonite laminated sheet top cover fixed with steel screws for mounting switches, sockets, regulator etc including 1.5 sqmm single core FRLS PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for following :-

(a) One light or fan point controlled by one 5 Amps switch one way

(b) One 3 pin socket point 5 Amp on independent board

(c) One 3 pin socket point 5 Amp on same board with other switches.

(d) One bell/buzzer point controlled by one push button on the same board with other switches or indpendent place.

All same as per item No 105 here-in-before but with 2.5 sqmm size single core multistranded copper conductor cable FRLS for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm FRLS PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and directed.

Switch piano, flush button single pole, 5 Amps one way complete all as directed.

Switch socket combination flush type 5 Amp 2 in 1 complete all as directed.

Switch socket combination flush type 5/15 Amps 3/3 pin universal multipurpose complete all as directed.

Bell push, flush type, single pole one way, 5 Amps, 230 volts AC complete all as directed.

Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks complete all as directed.

Door bell electronic, bul-bul music type, 230 volt AC. Make : Anchor complete all as directed.

Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as directed.

S & F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : CG Cat No LDL-20-WW or equivalent in specified make. Note : Old tube light fitting depostied to E/M Store.

S & F in replacement LED tube light fitting of 10 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : CG Cat No LDL-10-WW or equivalent in specified make. Note : Old tube light fitting depostied to E/M Store.

M&L for Sub main wiring surface type with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, FRLS, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor FRLS Cable as continuos earth wire dolly and connecting to existing main switch board / distribution board of the building as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed.

Supply and Fixed in replacement Sheet metal enclosure (ISI marked) distribution board TPN 4 way, 415 V horizontal type, double door, for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

Supply and Fixed in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

Supply and Fixed in replacement MCB 'C' Series single pole 6 to 32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified.

Supply and Fixed in replacement MCB C Series single pole & neutral 32 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as specified.

Supply and Fixed in replacement MCB 'C' Series TPN 63 A, 415volts 10 kA rupturing capacity providing in DB complete all as specified.

Taking down fan, cealing cable end, dismantling blades and removing fan and deposit to store complete all as directed.

5 star rated energy saving ceiling fan 1200mm sweep (white) with all accessories and hanging the ceiling fan from fan hook with 3 core flexible copper wire 24/0.20 sqmm from ceiling rose, etc all as directed. Make : Model ES-50 of Havells or equivalent in Usha/Orient/Bajaj.

Exhaust fans heavy duty AC single phase 230/ 240 V of size 250 mm sweep with louvers and all accessories and fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm , etc all as directed. Make : Havells/Usha/ Bajaj/ Orient

Excavation in trenches in hard/dense soil, not exc 1.5 mtr wide and n exc 1.5 mtr in depth; for foundation, laying pipes/elect cables etc, and getting out complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified in soft/loose/hard/dense soil complete all as directed.

Removing excavated materials of soil not exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

UG XLPE cable,1100 volts grade heavy duty with PVC insulated aluminium strandard conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed nominal cross section 25 sq. mm 4 core in service connections including taking down the old unserviceable cable all as directed by Engr in Charge.

River sand to required width at bottom and top for cable cushioning (not less 18 cm thick in layer after punning) all as specified in SSR Part-I complete all as directed.

Common burnt old size bricks of sub class B laid at right angle on the cable complete in trenches for cable protection complete all as directed by Engr-in-charge.

Galvanized Iron pipe light grade for protection & passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 40mm bore dia including taking dowm the old pipe complete all as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including testing and dismantling of old earthing complete all as directed.

G K CONSTRUCTIONS

Chittoor Engineering Industries

M/S Sonu Engineering and Construction Co

M/S Bhagyawanticonstruction

SHANTA DURGA TRADERS

Omkar Constructions

Sangam Construction