Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAccepted-AOC | ₹2.9 Cr | L1 | Accepted-AOC Being L1 and reasonable |
| 2 | L2₹3.0 Cr+₹14.5 L (4.99%)Rejected-Finance | ₹3.0 Cr+₹14.5 L (4.99%) | L2 | Rejected-Finance Being other than L1 |
| 3 | L3₹3.2 Cr+₹28.7 L (9.90%)Rejected-Finance MES WORKS SITE CARNICOBAR ANDAMAN NICOBAR ISLAND PIN 744301 | CARNICOBAR | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | ₹3.2 Cr+₹28.7 L (9.90%) | L3 | Rejected-Finance Being other than L1 |
| 4 | L4₹33.5 Cr+₹30.6 Cr (1054.8%)Rejected-Finance 1ST FLOOR PRABHA SHOPPING COMPLEX OLD PAHARGAON DOLLYGUNJ PORT BLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744103 UDYAM AN 01 0000143 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | ₹33.5 Cr+₹30.6 Cr (1054.8%) | L4 | Rejected-Finance Being other than L1 |
| 5 | L5₹3.4 Cr+₹52.9 L (18.3%)Rejected-Finance | ₹3.4 Cr+₹52.9 L (18.3%) | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹3.1 Cr
Closing Date
4 Nov 2021, 6:00 pmClosed
CE ANZ Portblair
HQ CE A N Z Port Blair Brichgunj
Construction of OTM accn for NCOs/ORs at Base Victualling Yard, Port Blair.
2021_MES_474093_2
801196
Open Tender
Civil Works
Lump-sum
728 days
Port Blair
As per NIT
10 documents required · 10 mandatory
₹2,000
GE P North Port Blair
Exempted
14 Dec 2021
13 Sept 2021
9 Nov 2021
13 Sept 2021
4 Nov 2021
21 Oct 2021
Amount
GENERAL SUMMARY NOTE: Schedule ‘A’ Part - I to XII are prepriced by MES under Ser No. 2.00 to 13.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.
Lumpsum price worked out by the contractor for “BUILDINGS/STRUCTURES” as listed in Schedule ‘A’ Part - I , inserted by MES
Lumpsum price worked out by the contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - II , inserted by MES
Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - III, inserted by MES
Lumpsum price worked out by the tenderer for "EXCAVATION AND EARTHWORK INCLUDING SITE CLEARANCE AND LAND DEVELOPMENT" as listed in Schedule ‘A’ Part-IV
Lumpsum price worked out by the tenderer for "RETAINING WALL" as listed in Schedule ‘A’ Part- V
Lumpsum price worked out by the tenderer for "ROAD / PATH / CULVERT/HARD STANDING" as listed in Schedule ‘A’ Part- VI
Lumpsum price worked out by the tenderer for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part- VII
Lumpsum price worked out by the tenderer for "AREA DRAINAGE" as listed in Schedule ‘A’ Part- VIII
Lumpsum price worked out by the tenderer for "EXTERNAL ELECTRIC SUPPLY" as listed in Schedule ‘A’ Part- IX
Lumpsum price worked out by the tenderer for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part- X
Lumpsum price worked out by the tenderer for "COOLING APPLIANCES" as listed in Schedule ‘A’ Part- XI
Lumpsum price worked out by the tenderer for "DEMOLITION/DISMANTLING" as listed in Schedule ‘A’ Part- XII
Subtotal
NOTE: Schedule ‘A’ Part - XIII (miscellaneous) are not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.
INTERNAL ELECTRIFICATION Supply and fix ceiling fan, 5 star rating suitable for working of AC 230V, 50 Hz, 1200mm sweep milky white colour with down rod, canopy, fasteners, 1.5 sqmm three core wire from ceiling rose to fan, ceiling hook complete all as specified and as directed.
S&F PVC Exhaust fans 225 mm sweep single phase 230 Volt 50 Hz heavy duty, 1400 rpm, energy efficient smooth functioning with suitable size of louver including fixing arrangement, opening of hole, anchor fasteners, 1.5 sqmm 3 core wire from ceiling rose to fan all as specified and as directed.
S&F Exhaust fans 450 mm sweep single phase 230 Volt 50 Hz heavy duty, 1400 rpm, energy efficient smooth functioning with suitable size of louver including fixing arrangement, opening of hole, anchor fasteners, 1.5 sqmm three core wire from ceiling rose to fan all as specified and as directed.
S & F Double pole and earth enclosure with a three pin and earth plug with socket 16A capacity including one double pole RCCB 16A capacity all as directed.
Supply and Fix LED type tube light fittings 4 feet long 1x20 W 230V ,decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate environmental friendly, energy efficient tube light life time 40,000 burning Hrs, lumen output 2000lm, color temp-6000K,Surge protection of 2kV with voltage protection 160-360V, power factor >0.9 complete & prewired for LED tube complete fixed to wall / Ceiling by suitable down rods, PVC round blocks and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 1x20W LED tube complete all as specified. Make : Philips Cat No-BN021C LED 20S PSU CW GR S2 or its Equivalent amongst the makes as specified ( 03years Guarantee as per manufacturer instructions or lifetime 40,000 burning Hrs whichever is earlier as applicable).
Supply and Fix 10 Watt LED fittings with surge protection of 2 KV with wide voltage protection 160-360 Volts, lumen output 900lm complete all as specified and as directed. Make: Philips Cat No-BN010C LED 20S PSU CW GR S1 or its equivalent amongst makes as specified.
Supply and fix Building security light 30 watt capacity LED including electronic driver IP 65 protection, fixing with suitable size of brackets 1.2 m long bend to shape including clamp, nut and bolt, connected from ceiling rose or existing point complete all as specified and as directed. Make: - Philips Cat No-BRP046LED30 CW MR S1 or its equivalent amongst the makes as specified.
Supply and fix TV socket / Telephone socket complete all as specified and directed
Supply and fix study table light slim LED wall fitting 17 W with 1350lm with 6500K confirming to cat No Philips Ultron model No 48027 or its equivalent amongst the makes as specified.
Supply and fix MCB SP 230 volts,10 KA, 6-32 Amps, C curve complete all as specified.
Supply and fix MCB SPN 230 volts, 10 KA, 6-32 Amps, C curve complete all as specified.
Supply and fix MCB SPN 230 volts, 10 KA, 40-63 Amps, C curve complete all as specified.
Supply and fix MCB TP 230 volts, 10KA, 6-32 Amps, C curve complete all as specified.
Supply and fix RCBO 4 pole 415 volts, 32-100 Amps ,sensitivity 30 mA capacity complete all as specified.
Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of earth plate not less than 1.5 m below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth wire of 4.0 sqmm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6), type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 m, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I.
Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5m length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation returning & filling. PCC chamber pit, RCC cover & test point. (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit.
EXTERNAL WATER SUPPLY M&L for Construction of masonry valve chamber of size 600X600X600 mm internal size, 100 mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonry with blocks cast using PCC 1:3:6, type C-1, set in cement mortar 1:4, 15MM thick plaster to internal surfaces and external surfaces up to 15cm below ground level and top of floor in cement and sand mortar 1:4, finished even and smooth without using extra cement , 3.15mm thick MS sheet cover including 50mmX50mmX6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25mmX6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50m complete all as specified and directed.
M & L for making bore in existing CI pipe line of size 100 mm and including threading for making branch connection for 50 mm including suitable barrel nipples, union and all accessories etc. as directed
M&L for cutting existing road/hard standing not exc. 45x60 cm in wide & depth getting out excavated material for laying GI tube , returning filling & well ramming watering finish surface 15 cm from top using PCC 1:3:6 including removal of surplus soil all as directed
EXTERNAL ELECTRIFICATION Supply, installation, testing and commissioning indoor cubical wall mounted type LT Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system with suitable size and powder coated, dust/vermin proof. The panel shall CPRI approved factory fabricated made with 2 mm thick CRCA sheet for outer shell and inner shell made out of 1.6 mm thick CRCA sheet, double door with front openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell shall be compartmentalized from openable single door lockable to accommodate TPN aluminium bus bar of rating 1.5 times of incomer MCCB, incoming / outgoing MCCB/MCBs, danger notice plate having conventional symbol of bone and skull be provided including wall mounting fasteners. The panel shall consist of the following accessories:-
(a) MCCB Four Pole 100 Amps, 415 Volts 25 KA - 1 Nos (Incoming) (b) MCB TPN 32 Amps, 230 Volts - 1 Nos- 4 Nos (Kitchen, First floor, Second Floor) (c) MCB SPN 20 Amps, 230 Volts - 2 Nos (d) RYB Panel Indicators - 3 Nos
M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (earth pit not less than 2.25mtr deep below GL) with top edge of earth plate not less than 1.5 m below normal ground level, including provision of galvanized wire 4 mm, earth plate surrounded from all sides by with 15cm thick packed layer of charcoal dust and common salt filling in alternate layer and electrode connection by using galvanized earth wire 4 mm connected by means of bolt ,nut, check nut & washer of galvanised iron, provision of 15 mm dia GI pipe light grade for protection of GI wire & 20mm dia. GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel ,wire gauge, 50mm thick RCC 1:2:4 TMT bars on both ways including necessary excavation in any type of soil returning filling in removal of surplus soil to distance n.exc. 50m complete all as shown in electrical plate no 5 of schedule part-1 2009 all as specified and directed.
COOLING APPLIANCES/ HEATING APPLIANCES Supply and install refrigerator electric driven (Single Phase ) of capacity 190 Litres, 230 Volts , 4 Star rated all as specified and as directed.
Supply and install voltage stabilizer for automatic operation ,single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilizer at 230V with accuracy of +2.5% and capacity 0.5 KVA
Supply and install voltage stabilizer for automatic operation ,single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilizer at 230V with accuracy of +2.5% and capacity 1KVA
Supply, install and testing electric water heater (Geyser) vertical storage type of capacity 25 litres to work on single phase, 230 volts, 50 Hz supply including provision of bolts, nuts, washers and grouting on walls and making good the disturbed portion to match with the existing surfaces and provision of suitable PVC pipe connection for hot and cold water connections with chromium plated brass check nuts incoming and outgoing and one no. non return valve complete all as directed.
DEMOLITION/DISMANTLING Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody complete all as directed.
Taking down of Old MCB DB of any size complete all as directed.
Subtotal
A.G.Construction
ASHOK BISWAS
Island Agency
AMR TRADERS
SACKSON ENTERPRISES
P NAIDU
SALCON ENGINEERS AND FABRICATORS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .