Construction of new Government Hostel building for backward class students of 1000 capacity (Including Electrification)near Deeksha Bhoomi square at Nagpur, Taluka Nagpur, District Nagpur.

Amount

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. A) GROUND

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. B) FIRST

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. A) GROUND

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. B) FIRST

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete. A) GROUND

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete. B) FIRST

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete. C) SECOND

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete. D) THIRD

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. A) GROUND

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. B) FIRST

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. C) SECOND

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. D) THIRD

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. A) GROUND

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. B) FIRST

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. C) SECOND

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. D) THIRD

Dismantling stone masonary in lime or cement mortar including stacking the materials as directed with all leads, lifts etc.

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m)

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.)

Excavation for foundation in soft rock including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Excavation for foundation in hard rock by chiselling and wedging or line drilling including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. (excluding dewatering)

a) Filling in plinth and floors with contractors approved material / murum in 15 cm to 20 cm layers including watering and compaction complete.

Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering etc complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for bedblocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), withfully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and applying 30 mm thick self curing Ceramic Polymer Micro concrete of approved make having Compressive strength above M 30, non shrink, impermeable, filling mortar to load carrying R. C. C. member in two layers on cleaned concrete surface, including honeycomb area (using manual/mechanical means). Mixing mortar of Nicosil C80 and fresh 53 grade cement with required water cement ratio for desired consistency and applying and finishing by manual trawelling, curing after curing initial setting time etc, as per manufacturers specification etc. complete as per specification and as directed By engineer-in-charge. Work shall be executed by certified applicator only and work shall be guaranteed for 5 years and guarantee shall be provided on Rs.500/- stamp paper. (Bond coat mentioned below is to be done before coating). A) FIRST

Providing and applying 30 mm thick self curing Ceramic Polymer Micro concrete of approved make having Compressive strength above M 30, non shrink, impermeable, filling mortar to load carrying R. C. C. member in two layers on cleaned concrete surface, including honeycomb area (using manual/mechanical means). Mixing mortar of Nicosil C80 and fresh 53 grade cement with required water cement ratio for desired consistency and applying and finishing by manual trawelling, curing after curing initial setting time etc, as per manufacturers specification etc. complete as per specification and as directed By engineer-in-charge. Work shall be executed by certified applicator only and work shall be guaranteed for 5 years and guarantee shall be provided on Rs.500/- stamp paper. (Bond coat mentioned below is to be done before coating). B) SECOND

Providing and applying 30 mm thick self curing Ceramic Polymer Micro concrete of approved make having Compressive strength above M 30, non shrink, impermeable, filling mortar to load carrying R. C. C. member in two layers on cleaned concrete surface, including honeycomb area (using manual/mechanical means). Mixing mortar of Nicosil C80 and fresh 53 grade cement with required water cement ratio for desired consistency and applying and finishing by manual trawelling, curing after curing initial setting time etc, as per manufacturers specification etc. complete as per specification and as directed By engineer-in-charge. Work shall be executed by certified applicator only and work shall be guaranteed for 5 years and guarantee shall be provided on Rs.500/- stamp paper. (Bond coat mentioned below is to be done before coating). C)THIRD

Providing and applying 30 mm thick self curing Ceramic Polymer Micro concrete of approved make having Compressive strength above M 30, non shrink, impermeable, filling mortar to load carrying R. C. C. member in two layers on cleaned concrete surface, including honeycomb area (using manual/mechanical means). Mixing mortar of Nicosil C80 and fresh 53 grade cement with required water cement ratio for desired consistency and applying and finishing by manual trawelling, curing after curing initial setting time etc, as per manufacturers specification etc. complete as per specification and as directed By engineer-in-charge. Work shall be executed by certified applicator only and work shall be guaranteed for 5 years and guarantee shall be provided on Rs.500/- stamp paper. (Bond coat mentioned below is to be done before coating). D) FOURTH

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. A) GROUND

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. B) FIRST

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. C) SECOND

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. D) THIRD

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. E) FOURTH

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. F) FIFTH

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. G) SIXTH

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. H) SEVENTH

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. I) EIGHTH

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality ArtificialSand. J) NINETH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. A) GROUND

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. B) FIRST

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. C) SECOND

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. D) THIRD

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. E) FOURTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. F) FIFTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. G) SIXTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. H) SEVENTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. I) EIGHTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. J) NINETH

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing outwater, formwork, laying/pumpingcover blocks, compactionand curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. A) GROUND

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. B) FIRST

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. C) SECOND

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. D) THIRD

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. E) FOURTH

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. F) FIFTH

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. G) SIXTH

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. H) SEVENTH

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. I) EIGHTH

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings includingcentering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimumthickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. J) NINTH

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. A) GROUND

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. B) FIRST

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. C) SECOND

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. D) THIRD

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. E) FOURTH

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. F) FIFTH

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. G) SIXTH

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. H) SEVENTH

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. I) EIGHTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. A) GROUND

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. B) FIRST

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. C) SECOND

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. D) THIRD

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. E) FOURTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. F) FIFTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. G) SIXTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. H) SEVENTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. I) EIGHTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand. J) NINETH

Providing and laying Cast in situ/Ready Mixcement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. A) SECOND

Providing and laying Cast in situ/Ready Mixcement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. B) NINETH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centering will not be allowed). A) GROUND

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centering will not be allowed). B) SECOND

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centering will not be allowed). C) FOURTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centering will not be allowed). D) SIXTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centering will not be allowed). E) SEVENTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centering will not be allowed). F) EIGHTH

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. A) GROUND

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. B) FIRST

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. C) SECOND

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. D) THIRD

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. E) FOURTH

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. F) FIFTH

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. G) SIXTH

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. H) SEVENTH

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. I) EIGHTH

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. J) NINETH

Providing expansion joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to IS1 838, 1961, 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate finishing etc. complete as directed. A) GROUND

Providing expansion joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to IS1 838, 1961, 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate finishing etc. complete as directed. B) FIRST

Providing expansion joints in R.C.C. Framed structure (exterior column) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate and finishing etc. complete. A) GROUND

Providing expansion joints in R.C.C. Framed structure (exterior column) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate and finishing etc. complete. B) FIRST

Providing expansion joints in R.C.C. Framed structure (at floor level) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plat and finishing etc. complete.

Providing expansion joints in R.C.C. Framed structure (at Terrace level) with premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate as required, bitumen poured filler and finishing etc. complete as directed.

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 150 mm & Diamond core cutting length 300 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 150 mm & Diamond core cutting length 250 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 150 mm & Diamond core cutting length 200 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 150 mm & Diamond core cutting length 150 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 150 mm & Diamond core cutting length 100 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 150 mm & Diamond core cutting length 75 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 150 mm & Diamond core cutting length 50/40/30 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 200 mm & Diamond core cutting length 300 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 200 mm & Diamond core cutting length 250 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 200 mm & Diamond core cutting length 200 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 200 mm & Diamond core cutting length 150 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 200 mm & Diamond core cutting length 100 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 200 mm & Diamond core cutting length 75 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 200 mm & Diamond core cutting length 50/40/30 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 300 mm & Diamond core cutting length 300 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 300 mm & Diamond core cutting length 250 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 300 mm & Diamond core cutting length 200 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 300 mm & Diamond core cutting length 150 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 300 mm & Diamond core cutting length 100 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 300 mm & Diamond core cutting length 75 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 300 mm & Diamond core cutting length 50/40/30 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 400 mm & Diamond core cutting length 300 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 400 mm & Diamond core cutting length 250 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 400 mm & Diamond core cutting length 200 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 400 mm & Diamond core cutting length 150 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 400 mm & Diamond core cutting length 100 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 400 mm & Diamond core cutting length 75 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 400 mm & Diamond core cutting length 50/40/30 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 500 mm & Diamond core cutting length 300 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 500 mm & Diamond core cutting length 250 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 500 mm & Diamond core cutting length 200 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 500 mm & Diamond core cutting length 150 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 500 mm & Diamond core cutting length 100 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 500 mm & Diamond core cutting length 75 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 500 mm & Diamond core cutting length 50/40/30 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 600 mm & Diamond core cutting length 300 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 600 mm & Diamond core cutting length 250 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 600 mm & Diamond core cutting length 200 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 600 mm & Diamond core cutting length 150 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 600 mm & Diamond core cutting length 100 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 600 mm & Diamond core cutting length 75 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 600 mm & Diamond core cutting length 50/40/30 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 1000 mm & Diamond core cutting length 300 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 1000 mm & Diamond core cutting length 250 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 1000 mm & Diamond core cutting length 200 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 1000 mm & Diamond core cutting length 150 mm dia

Providing and doing cutting of various building component by diamond core cutting tool to a required depth following line and levels so that joining will be smooth. Item includes provision of equipment, machine and operator complete. All the security provision should be provided by contractor. Depth upto 1000 mm & Diamond core cutting length 100 mm dia

Preparing Rebaring column/beam/chajja/footing of specified diameter of bar as directed by engineer incharge, including drilling,cleaning etc. complete. (using chemical agent Re500 HILTY) 8 mm dia

Preparing Rebaring column/beam/chajja/footing of specified diameter of bar as directed by engineer incharge, including drilling,cleaning etc. complete. (using chemical agent Re500 HILTY) 10 mm dia

Preparing Rebaring column/beam/chajja/footing of specified diameter of bar as directed by engineer incharge, including drilling,cleaning etc. complete. (using chemical agent Re500 HILTY) 12 mm dia

Preparing Rebaring column/beam/chajja/footing of specified diameter of bar as directed by engineer incharge, including drilling,cleaning etc. complete. (using chemical agent Re500 HILTY) 16 mm dia

Preparing Rebaring column/beam/chajja/footing of specified diameter of bar as directed by engineer incharge, including drilling,cleaning etc. complete. (using chemical agent Re500 HILTY) 20 mm dia

Preparing Rebaring column/beam/chajja/footing of specified diameter of bar as directed by engineer incharge, including drilling,cleaning etc. complete. (using chemical agent Re500 HILTY) 25 mm dia

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in superstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. A) GROUND

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 insuperstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. B) FIRST

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in superstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. C) SECOND

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in superstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. D) THIRD

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in superstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. E) FOURTH

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in superstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. F) FIFTH

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in superstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. G) SIXTH

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 insuperstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. H) SEVENTH

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in superstructure including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. I) EIGHTH

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. A) GROUND

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. B) FIRST

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. C) SECOND

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. D) THIRD

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. E) FOURTH

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. F) FIFTH

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. G) SIXTH

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. H) SEVENTH

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. I) EIGHTH

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. A) GROUND

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. B) FIRST

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. C) SECOND

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. D) THIRD

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. E) FOURTH

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. F) FIFTH

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. G) SIXTH

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. H) SEVENTH

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc.complete. I) EIGHTH

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brushcovering 7 years guarantee on Stamp Papers etc. complete. A) GROUND

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brushcovering 7 years guarantee on Stamp Papers etc. complete. B) SECOND

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brushcovering 7 years guarantee on Stamp Papers etc. complete. C) FOURTH

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brushcovering 7 years guarantee on Stamp Papers etc. complete. D) TERRACE

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. A) GROUND

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. B) FIRST

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. C) SECOND

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. D) THIRD

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. E) FOURTH

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. F) FIFTH

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. G) SIXTH

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. H) SEVENTH

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. I) EIGHTH

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. J) NINETH

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. A) GROUND

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. B) FIRST

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. C) SECOND

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. D) THIRD

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. E) FOURTH

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. F) FIFTH

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. G) SIXTH

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. H) SEVENTH

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. I) EIGHTH

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. A) GROUND

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. B) FIRST

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. C) SECOND

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. D) THIRD

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. E) FOURTH

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. F) FIFTH

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. G) SIXTH

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. H) SEVENTH

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. I) EIGHTH

Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete/brick/stone masonry surfaces in all positions with base coat 12 to 15 mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days curing etc. complete. A) GROUND

Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete/brick/stone masonry surfaces in all positions with base coat 12 to 15 mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days curing etc. complete. B) FIRST

Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete/brick/stone masonry surfaces in all positions with base coat 12 to 15 mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days curing etc. complete. C) SECOND

Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete/brick/stone masonry surfaces in all positions with base coat 12 to 15 mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days curing etc. complete. D) THIRD

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. A) GROUND

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. B) FIRST

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. C) SECOND

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. D) THIRD

Providing and laying machine cut machine Polished Kota stone flooring 25 mm to 30 mm thick and required width in plain/diamond pattern on bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

Supply & Fixing of FLOOR Tiles 9 mm thick Of tiles size 600x600mm and Having matt Polished surface required width wide in plain pattern including OPC cement float filling joints with neat cement Paste curing and cleaning complete, Make : Simpolo Vitrified, Akash Ceramic, Inventa Ceramics, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE. (REFENENCE DR NO, 26J) A) GROUND

Supply & Fixing of FLOOR Tiles 9 mm thick Of tiles size 600x600mm and Having matt Polished surface required width wide in plain pattern including OPC cement float filling joints with neat cement Paste curing and cleaning complete, Make : Simpolo Vitrified, Akash Ceramic, Inventa Ceramics, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE. (REFENENCE DR NO, 26J) A) FIRST

Supply & Fixing of Wall Tiles 9 mm thick Of tiles size 600x1200mm and Having matt Polished surface required width wide in plain pattern including OPC cement float filling joints with neat cement Paste curing and cleaning complete, of Make : Simpolo Vitrified, Akash Ceramic, Inventa Ceramics, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE. b) Skirting (REFENENCE DR NO, 26K) A) GROUND

Supply & Fixing of Wall Tiles 9 mm thick Of tiles size 600x1200mm and Having matt Polished surface required width wide in plain pattern including OPC cement float filling joints with neat cement Paste curing and cleaning complete, of Make : Simpolo Vitrified, Akash Ceramic, Inventa Ceramics, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE. b) Skirting (REFENENCE DR NO, 26K) B) FIRST

Providing and laying matt finish ceramic tiles of having size 30cm x 30 cm confirming to I. S. 15622/2006 (group DII-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. a) Flooring

Providing and laying ceramic tiles having size 30cm.x60cm. confirming to corresponding I. S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. b) Skirting

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring A) GROUND

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring B) FIRST

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring C) SECOND

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring D) THIRD

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring E) FOURTH

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring F) FIFTH

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring G) SIXTH

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring H) SEVENTH

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring I) EIGHTH

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring J) NINETH

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) DADO AND SKIRTING A) GROUND

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) DADO AND SKIRTING B) FIRST

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) DADO AND SKIRTING B) SECOND

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) DADO AND SKIRTING C) THIRD

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting A) GROUND

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting B) FIRST

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting C) SECOND

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting D) THIRD

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting E) FOURTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting F) FIFTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting G) SIXTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting H) SEVENTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting I) EIGHTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting J) NINETH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring A) GROUND

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring B) FIRST

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring C) SECOND

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring D) THIRD

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring E) FOURTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring F) FIFTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring G) SIXTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring H) SEVENTH

Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring I) EIGHTH

Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete A) SECOND

Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete B) THIRD

Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete C) FOURTH

Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete D) FIFTH

Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete E) SIXTH

Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete F) SEVENTH

Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete G) EIGHTH

Providing sills of required material 20 mm to 25 mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete b) Granite A) GROUND

Providing sills of required material 20 mm to 25 mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete b) Granite B) FIRST

Providing sills of required material 20 mm to 25 mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete b) Granite C) SECOND

Providing sills of required material 20 mm to 25 mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning complete b) Granite D) THIRD

Providing and preparing kitchen otta upto 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including ll material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. A) GROUND

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. B) FIRST

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. C) SECOND

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. D) THIRD

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. E) FOURTH

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. F) FIFTH

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. G) SIXTH

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. H) SEVENTH

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish. I) EIGHTH

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. A) GROUND

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. B) FIRST

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. C) SECOND

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. D) THIRD

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. E) FOURTH

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. F) FIFTH

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. G) SIXTH

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. H) SEVENTH

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. I) EIGHTH

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. A) GROUND

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. B) FIRST

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. C) SECOND

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. D) THIRD

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. F) FOURTH

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. G) FIFTH

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. H) SIXTH

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. I) SEVENTH

Providing and laying in position flooring of telephone black/AmbaWhite/Catbary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. J) EIGHTH

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. A) GROUND

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. B) FIRST

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. C) SECOND

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. D) THIRD

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. E) FOURTH

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. F) FIFTH

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. G) SIXTH

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. H) SEVENTH

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. I) EIGHTH

Providing and fixing of Ply Flush Doors single leaf fully panelled door shutter of 40mm thickness with 4 mm thick veneer applied with melamine polish of ASIAN MAKE. Fixing fasting and finishing complete, of make : Green Ply, Century Ply, Ultra, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE (SINGLE LEAF DOOR SHALL BE AS APPROVED BY PROJECT ARCHITECT) (REFENENCE DR NO, 26L) A) GROUND

Providing and fixing of Ply Flush Doors single leaf fully panelled door shutter of 40mm thickness with 4 mm thick veneer applied with melamine polish of ASIAN MAKE. Fixing fasting and finishing complete, of make : Green Ply, Century Ply, Ultra, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE (SINGLE LEAF DOOR SHALL BE AS APPROVED BY PROJECT ARCHITECT) (REFENENCE DR NO, 26L) B) FIRST

Providing and fixing of Ply Flush Doors single leaf fully panelled door shutter of 40mm thickness with 4 mm thick veneer applied with melamine polish of ASIAN MAKE. Fixing fasting and finishing complete, of make : Green Ply, Century Ply, Ultra, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE (SINGLE LEAF DOOR SHALL BE AS APPROVED BY PROJECT ARCHITECT) (REFENENCE DR NO, 26L) C) SECOND

PROVIDING AND SUPPLYING HARDWARE FOR SINGLE LEAF DOOR OF WASHROOM/KITCHEN AS PER DRAWING WITH HARDWARE--- 4 BB BALL BEARING HINGE - 102X76X3 MM FIRE RATED (ESSH 4303-N) 4 nos CONCEALED DOOR CLOSER EN 2-4-CAM ACTION ( ITS 960) 1no BRASS TOWER BOLT- 250MM- ROUND KNOB (ETB SQ 010) 1 no CYLINDRICAL MORTISE FIRE RATED DEAD LOCK (EDL FR 001) 1 no KEY HOLE - ROUND -50MM (EKEY 003) 2 no 60MM HIGH SECURITY EURO CYLINDER LOCK OVAL KNOB WITH 5 COMPUTER (ECY HSL 21060) 1 no MAGNETIC DOOR STOPPER SS (EDF 030 SS) 1no D TYPE DOOR HANDLE -300MM -SS 304 (DIA 22MM) (ESDH 1212 ) 2 no. OF MAKE : DORMA/HAFELLE/ENOX-ASSAABLOY, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE (SINGLE LEAF DOOR SHALL BE AS APPROVED BY PROJECT ARCHITECT) (REFENENCE DR NO, 26M)

Providing and fixing of Ply Flush Doors Doudle leaf fully panelled door shutter 40mm thickness with 4 mm thick veneer applied with melamine polish of ASIAN MAKE. Fixing fasting and finishing complete, of make : Green Ply, Century Ply, Ultra, INCLUDING ALL LIFTSLEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE (SINGLE LEAF DOOR SHALL BE AS APPROVED BY PROJECT ARCHITECT) (REFENENCE DR NO, 26N)

PROVIDING AND SUPPLYING HARDWARE FOR DOUBLE LEAF DOOR OF WASHROOM/KITCHEN AS PER DRAWING WITH HARDWARE---4 BB BALL BEARING HINGE - 102X76X3 MM FIRE RATED (ESSH 4303-N) 8 nos CONCEALED DOOR CLOSER EN 2-4-CAM ACTION ( ITS 960) 2no BRASS TOWER BOLT- 250MM- ROUND KNOB (ETB SQ 010) 1no CYLINDRICAL MORTISE FIRE RATED DEAD LOCK (EDL FR 001) 1no KEY HOLE - ROUND -50MM (EKEY 003) 2no 60MM HIGH SECURITY EURO CYLINDER LOCK OVAL KNOB WITH 5 COMPUTER (ECY HSL 21060) 1no MAGNETIC DOOR STOPPER SS (EDF 030 SS) 2no D TYPE DOOR HANDLE -300MM -SS 304 (DIA 22MM) (ESDH 1212 ) 2 no. OF MAKE : DORMA/HAFELLE/ENOX-ASSAABLOY, INCLUDING ALL LIFTSLEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE (DOUBLE LEAF DOOR SHALL BE AS APPROVED BY PROJECT ARCHITECT) (REFENENCE DR NO, 26-O)

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. A) GROUND

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. B) FIRST

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. C) SECOND

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. D) THIRD

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. E) FOURTH

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. F) FIFTH

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. G) SIXTH

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. H) SEVENTH

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202-1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. I) EIGHTH

Providing and fixing ISI marked double swing flush door shutters conforming to IS:2202 (PartI) Non-decorative type, core of block board construction with frame of 1st class hardwood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless SteelL-hinges with necessary screws Fittings & Fixtures per leaf SS kick plates on both sides of the door of 300mm height Heavy Duty satin finish butt SSHinges (100mm x 75mm x 3mm in size) -4 nos. SS finished lever handle with mortise lock- 1 no. Floor spring-1No.100 mm x 100 mm safety glass at the specified location

Providing and fixing M. S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. A) SECOND

Providing and fixing M. S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. B) THIRD

Providing and fixing M. S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. C) FOURTH

Providing and fixing M. S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. D) FIFTH

Providing and fixing M. S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. E) SIXTH

Providing and fixing M. S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. F) SEVENTH

Providing and fixing M. S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. G) EIGHTH

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box A) GROUND

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box B) FIRST

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box C) SECOND

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box D) THIRD

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box E) FOURTH

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box F) FIFTH

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box G) SIXTH

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box H) SEVENTH

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight of 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 3 mm acrylic plain sheet and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box I) EIGHTH

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete A) GROUND

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete B) FIRST

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete C) SECOND

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete D) THIRD

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete E) FOURTH

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete F) FIFTH

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete G) SIXTH

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete H) SEVENTH

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete I) EIGHTH

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. A) GROUND

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. B) FIRST

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. C) SECOND

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. D) THIRD

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. E) FOURTH

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. F) FIFTH

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. F) SIXTH

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. F) SEVENTH

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm. G) EIGHTH

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. A) GROUND

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. B) FIRST

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. C) SECOND

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. D) THIRD

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. E) FOURTH

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. F) FIFTH

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. F) SIXTH

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. F) SEVENTH

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. F) EIGHTH

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. A) GROUND

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. B) FIRST

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. C) SECOND

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. D) THIRD

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. E) FOURTH

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. F) FIFTH

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. G) SIXTH

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. H) SEVENTH

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. I) EIGHTH

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. A) GROUND

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. B) FIRST

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. C) SECOND

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. D) THIRD

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. E) FOURTH

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. F) FIFTH

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. G) SIXTH

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. H) SEVENTH

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. I) EIGHTH

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applyin textured paint including scaffolding if necessarpreparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. A) GROUND

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applyin textured paint including scaffolding if necessarpreparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. B) FIRST

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applyin textured paint including scaffolding if necessarpreparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. B) SECOND

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applyin textured paint including scaffolding if necessarpreparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. C) THIRD

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applyin textured paint including scaffolding if necessarpreparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. D) NINETH

PROVIDING AND APPLYING GRANULAR TEXTURED FINISH 1.5MM THICK TO OLD / NEW SURFACES IN DECORATIVE FINISH IN APPROVED COLOUR AND SHADE AS DIRECTED BY ENGINEER-IN-CHARGE INCLUDING SCRAPPING PREPARING THE SURFACE SCAFFOLDING ETC. COMPLETE. SPEC NO.:AS DIRECTED BY ENGINEER INCHARGE. A) FIRST

PROVIDING AND APPLYING GRANULAR TEXTURED FINISH 1.5MM THICK TO OLD / NEW SURFACES IN DECORATIVE FINISH IN APPROVED COLOUR AND SHADE AS DIRECTED BY ENGINEER-IN-CHARGE INCLUDING SCRAPPING PREPARING THE SURFACE SCAFFOLDING ETC. COMPLETE. SPEC NO.:AS DIRECTED BY ENGINEER INCHARGE. B) SECOND

PROVIDING AND APPLYING GRANULAR TEXTURED FINISH 1.5MM THICK TO OLD / NEW SURFACES IN DECORATIVE FINISH IN APPROVED COLOUR AND SHADE AS DIRECTED BY ENGINEER-IN-CHARGE INCLUDING SCRAPPING PREPARING THE SURFACE SCAFFOLDING ETC. COMPLETE. SPEC NO.:AS DIRECTED BY ENGINEER INCHARGE. C) THIRD

PROVIDING AND APPLYING GRANULAR TEXTURED FINISH 1.5MM THICK TO OLD / NEW SURFACES IN DECORATIVE FINISH IN APPROVED COLOUR AND SHADE AS DIRECTED BY ENGINEER-IN-CHARGE INCLUDING SCRAPPING PREPARING THE SURFACE SCAFFOLDING ETC. COMPLETE. SPEC NO.:AS DIRECTED BY ENGINEER INCHARGE. D) FOURTH

PROVIDING AND APPLYING GRANULAR TEXTURED FINISH 1.5MM THICK TO OLD / NEW SURFACES IN DECORATIVE FINISH IN APPROVED COLOUR AND SHADE AS DIRECTED BY ENGINEER-IN-CHARGE INCLUDING SCRAPPING PREPARING THE SURFACE SCAFFOLDING ETC. COMPLETE. SPEC NO.:AS DIRECTED BY ENGINEER INCHARGE. E) FIFTH

PROVIDING AND APPLYING GRANULAR TEXTURED FINISH 1.5MM THICK TO OLD / NEW SURFACES IN DECORATIVE FINISH IN APPROVED COLOUR AND SHADE AS DIRECTED BY ENGINEER-IN-CHARGE INCLUDING SCRAPPING PREPARING THE SURFACE SCAFFOLDING ETC. COMPLETE. SPEC NO.:AS DIRECTED BY ENGINEER INCHARGE. F) SIXTH

PROVIDING AND APPLYING GRANULAR TEXTURED FINISH 1.5MM THICK TO OLD / NEW SURFACES IN DECORATIVE FINISH IN APPROVED COLOUR AND SHADE AS DIRECTED BY ENGINEER-IN-CHARGE INCLUDING SCRAPPING PREPARING THE SURFACE SCAFFOLDING ETC. COMPLETE. SPEC NO.:AS DIRECTED BY ENGINEER INCHARGE. G) SEVENTH

PROVIDING AND APPLYING GRANULAR TEXTURED FINISH 1.5MM THICK TO OLD / NEW SURFACES IN DECORATIVE FINISH IN APPROVED COLOUR AND SHADE AS DIRECTED BY ENGINEER-IN-CHARGE INCLUDING SCRAPPING PREPARING THE SURFACE SCAFFOLDING ETC. COMPLETE. SPEC NO.:AS DIRECTED BY ENGINEER INCHARGE. H) EIGHTH

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. A) GROUND

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. B) FIRST

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. C) SECOND

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. D) THIRD

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. F) FOURTH

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. G) FIFTH

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. H) SIXTH

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. I) SEVENTH

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. J) EIGHTH

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. A) GROUND

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. B) FIRST

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. C) SECOND

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. D) THIRD

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. E) FOURTH

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. F) FIFTH

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. G) SIXTH

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. H) SEVENTH

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. I) EIGHTH

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)

Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 kg/sq.cm reaffirmed in 2006, having wert transverse strength of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm, skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan / designed pattern on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring.

Transportation of material obtained from debris of various sorts including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed. (a) For 5 Km.

PROVIDING AND FIXING IN REQUIRED POSITION DECORATIVE COLUMN CLADDING OF PINK/IVORY SAND STONE SLABS 100 MM TO 150 MM THICK AND REQUIRED HEIGHT OF 1M TO 1.5 M WITH DECORATIVE CARVING AS PER DRAWING / DESIGN ON AFTER MAKING THE WALL PORTION TO REQUIRED LEVEL WITH C.M. 1:4 FIXING STONE WITH READY MADE ADHESIVE INCLUDING CEMENT FLOT, FILING JOINTS WITH COLOURED GROUT, CURING, RUBBING, POLISHING, AND CLEANING COMPLETE. (REFENENCE DR NO, 26C) A) GROUND

PROVIDING AND FIXING IN REQUIRED POSITION DECORATIVE COLUMN CLADDING OF PINK/IVORY SAND STONE SLABS 100 MM TO 150 MM THICK AND REQUIRED HEIGHT OF 1M TO 1.5 M WITH DECORATIVE CARVING AS PER DRAWING / DESIGN ON AFTER MAKING THE WALL PORTION TO REQUIRED LEVEL WITH C.M. 1:4 FIXING STONE WITH READY MADE ADHESIVE INCLUDING CEMENT FLOT, FILING JOINTS WITH COLOURED GROUT, CURING, RUBBING, POLISHING, AND CLEANING COMPLETE. (REFENENCE DR NO, 26C) B) SECOND

PROVIDING AND FIXING IN REQUIRED POSITION DECORATIVE COLUMN CLADDING OF PINK/IVORY SAND STONE SLABS 100 MM TO 150 MM THICK AND REQUIRED HEIGHT OF 1M TO 1.5 M WITH DECORATIVE CARVING AS PER DRAWING / DESIGN ON AFTER MAKING THE WALL PORTION TO REQUIRED LEVEL WITH C.M. 1:4 FIXING STONE WITH READY MADE ADHESIVE INCLUDING CEMENT FLOT, FILING JOINTS WITH COLOURED GROUT, CURING, RUBBING, POLISHING, AND CLEANING COMPLETE. (REFENENCE DR NO, 26C) C) FOURTH

PROVIDING AND FIXING IN REQUIRED POSITION DECORATIVE COLUMN CLADDING OF PINK/IVORY SAND STONE SLABS 100 MM TO 150 MM THICK AND REQUIRED HEIGHT OF 1M TO 1.5 M WITH DECORATIVE CARVING AS PER DRAWING / DESIGN ON AFTER MAKING THE WALL PORTION TO REQUIRED LEVEL WITH C.M. 1:4 FIXING STONE WITH READY MADE ADHESIVE INCLUDING CEMENT FLOT, FILING JOINTS WITH COLOURED GROUT, CURING, RUBBING, POLISHING, AND CLEANING COMPLETE. (REFENENCE DR NO, 26C) C) SIXTH

PROVIDING AND FIXING IN REQUIRED POSITION DECORATIVE COLUMN CLADDING OF PINK/IVORY SAND STONE SLABS 100 MM TO 150 MM THICK AND REQUIRED HEIGHT OF 1M TO 1.5 M WITH DECORATIVE CARVING AS PER DRAWING / DESIGN ON AFTER MAKING THE WALL PORTION TO REQUIRED LEVEL WITH C.M. 1:4 FIXING STONE WITH READY MADE ADHESIVE INCLUDING CEMENT FLOT, FILING JOINTS WITH COLOURED GROUT, CURING, RUBBING, POLISHING, AND CLEANING COMPLETE. (REFENENCE DR NO, 26C) C) EIGHTH

PROVIDING AND FIXING IN REEQUIRED POSITION OF EXTERNAL WALL CLADDING OF RED SAND STONE SLABS 20MM TO 25 MM THICK AND REQUIRED WIDTH ON AFTER MAKING THE WALL PORTION TO REQUIRED LEVEL WITH C.M.1:4 FIXING STONE WITH READY MADE ADHESIVE INCLUDING CEMENT FLOT, FILING JOINTS WITH COLOURED GROUT, CURING, RUBBING, POLISHING, AND CLEANING COMPLETE. (REFENENCE DR NO, 26D)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand A) GROUND

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand B) FIRST

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand C) SECOND

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand D) THIRD

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand E) FOURTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand F) FIFTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand G) SIXTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand H) SEVENTH

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V. S. I. quality Artificial Sand I) EIGHTH

PROVIDING & FIXING GLASS CANOPY AT 15 METRE HEIGHT FROM 4 METRE HIGH RAMP FROM GROUND WITH 6 MM, 8 MM WITH 1.5 PVB LAMINATED TOUGHNED GLASS BY F.G. GLASS INDIA PVT. LTD. MUMBAI OR EQUVIVALENT COMPANY TO CUT GLASS IN REQUIRED SHAPES, OF BRAND SAINT GOBAIN, WITH SILLICON 789/CS BLACK & WHITE SHADE, 1.52 PVB, 6 MM, 8 MM TOUGHENED GLASS INCLUDING SUPPORT OF MS TRUSS AS PER DESIGN WITH MAIN TRUSS PIPE OF DIA 150 MM AND SECOND PIPE OF DIA 100 MM, SUSPENDED BY METAL ROPE CABLES OF 50 MM DIAMETER WITH FIXTURES OF DORMA XL - C 6030 (1 WAY SPIDER FIN TYPE WITH BOLT), DORMA XL - C 6033 (4 WAY SPIDER FIN TYPE WITH BOLT), DORMA XL - C 6032 (2 WAY SPIDER FIN TYPE WITH BOLT 180*), INSTALLATION BY CRANE & INCLUDING TRANSPORTATION, LOADING UNLOADING, FILLING OF SILICON IN JOINTS & NUT BOLTING, SCAFOLDING UP TO HEIGHT OF 15 M. ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE (REFFERANCE DRG. NO. 26B )

PROVIDING AND FIXING STAINLESS STEEL PROJECT TITLE OF 0.6 X 20 M. SIZE, AS PER DRAWING, CASTED BY SCULPTOR APPROVED BY N.I.T. INCLUDING PREPARATION OF CLAY/POP MODEL (MODEL TO BE APPROVED BY THE PROJECT ARCHITECT), MAKING DIE , INCLUDING FABRICATING, FIXTURES & FASTENERS, FIXING MURAL WORK , NECESSARY WELDING, FIXING BY NUTS AND BOLTS, BUFFING WITH APPROVED FINISHED, REMAKING THE DAMAGED SURFACE, CLEANING, FINSHING, SCAFOLDING 5 M ABOVE FOURTH SLAB LEVEL, PACKING, TRANSPORTATION, LOADING, UNLOADING, INSTALLATION. ETC. COMPLETE. AS DIRECTED BY ENGINEER-IN-CHARGE. (REFENENCE DR NO, 26Q)

Providing and fixing of cladding of 4mm thick Aluminium composite panel with 3mm anti-toxic VIrgin polyethylene core sandwich with 2 aluminum coated coil (Alloy - 5005 grade) of 0.50mm thickness on top and Bottom and Front Face of coil shall coated with Solid/Rustic Colors of Exterior Grade coating Compliance to AAMA2605 and back coil shall have Primer Coat .Rate shall include the cost of supplying and fixing of laminated sandwiched composite panel, The frame work was done by using Aludecor Male Female Rainscreen System having Aluminium Alloy 6063 T5/T6 Omega Profile ALPL/P/211 , Male Profile ALPL/P/311 & Female Profile ALPL/P/312.T-Bracket ALPL/P/210A (or) ALPL/P/210B, the design criteria with toggle cleat spacing shall not exceed 450mm and necessary stifferners 'L' Angle frame behind ACP shall be provided at every 600mm and to be fixed suitable adhesive or VHB tape for bonding the stiffener into panel to avoid the permenant deformation over a period with thicknes not less than 2mm.All ACP fold at corners shall be provided with 'L'Cleat of 1.5mm thick at suitable interval and HDG bracket etc,Complete.Anchor Fastner (DFT)& (DDRM). MS supportive shape structure cutting of ACP sheet as per shape of building with SS 304 screws and fasteners of Hilti make and aluminum brackets whenever required. System to be used shall be as per the approved drawings, Of Make : Alex, ALudecor, Viva, INCLUDING TRANSPORTATION, LOADING, UNLOADING, FINISHING, CLEANING, NUT BOLTING, SCREWING, BRACING, SCAFOLDING REQUIRED AT EACH LEVEL UP TO HEIGHT OF 25 METERS ETC. COMPLETE. (REFENENCE DR NO, 26A)

Providing and Supplying of screen panel cladding fixed system manufactured by APPROVED MAKES. The Screen panels of customised sizes say 900 mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA3105 of 2.0 mm thick. Screen panels shall have customized perforation as per architects design. Combination of perforations to be provided to suite the design Panels. Panels shall be coated on visible side with NANO technology powder coated as per the architectural intent. The panels of required length and height shall be fixed to Aluminium sub structure of 25X25X1mm by means of GI/Alu guide clamps (Installer’s scope). The provision shall be made for concealed lighting wherever required as per architects directives. Panels shall be bend from all four sides and shall have extended flanges to accommodate clamps and shall be with NRC value 0.5. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete. (REFENENCE DR NO, 26R) A) SECOND

Providing and Supplying of screen panel cladding fixed system manufactured by APPROVED MAKES. The Screen panels of customised sizes say 900 mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA3105 of 2.0 mm thick. Screen panels shall have customized perforation as per architects design. Combination of perforations to be provided to suite the design Panels. Panels shall be coated on visible side with NANO technology powder coated as per the architectural intent. The panels of required length and height shall be fixed to Aluminium sub structure of 25X25X1mm by means of GI/Alu guide clamps (Installer’s scope). The provision shall be made for concealed lighting wherever required as per architects directives. Panels shall be bend from all four sides and shall have extended flanges to accommodate clamps and shall be with NRC value 0.5. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete. (REFENENCE DR NO, 26R) B) THIRD

Providing and Supplying of screen panel cladding fixed system manufactured by APPROVED MAKES. The Screen panels of customised sizes say 900 mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA3105 of 2.0 mm thick. Screen panels shall have customized perforation as per architects design. Combination of perforations to be provided to suite the design Panels. Panels shall be coated on visible side with NANO technology powder coated as per the architectural intent. The panels of required length and height shall be fixed to Aluminium sub structure of 25X25X1mm by means of GI/Alu guide clamps (Installer’s scope). The provision shall be made for concealed lighting wherever required as per architects directives. Panels shall be bend from all four sides and shall have extended flanges to accommodate clamps and shall be with NRC value 0.5. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete. (REFENENCE DR NO, 26R) C) FOURTH

Providing and Supplying of screen panel cladding fixed system manufactured by APPROVED MAKES. The Screen panels of customised sizes say 900 mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA3105 of 2.0 mm thick. Screen panels shall have customized perforation as per architects design. Combination of perforations to be provided to suite the design Panels. Panels shall be coated on visible side with NANO technology powder coated as per the architectural intent. The panels of required length and height shall be fixed to Aluminium sub structure of 25X25X1mm by means of GI/Alu guide clamps (Installer’s scope). The provision shall be made for concealed lighting wherever required as per architects directives. Panels shall be bend from all four sides and shall have extended flanges to accommodate clamps and shall be with NRC value 0.5. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete. (REFENENCE DR NO, 26R) D) FIFTH

Providing and Supplying of screen panel cladding fixed system manufactured by APPROVED MAKES. The Screen panels of customised sizes say 900 mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA3105 of 2.0 mm thick. Screen panels shall have customized perforation as per architects design. Combination of perforations to be provided to suite the design Panels. Panels shall be coated on visible side with NANO technology powder coated as per the architectural intent. The panels of required length and height shall be fixed to Aluminium sub structure of 25X25X1mm by means of GI/Alu guide clamps (Installer’s scope). The provision shall be made for concealed lighting wherever required as per architects directives. Panels shall be bend from all four sides and shall have extended flanges to accommodate clamps and shall be with NRC value 0.5. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete. (REFENENCE DR NO, 26R) E) SIXTH

Providing and Supplying of screen panel cladding fixed system manufactured by APPROVED MAKES. The Screen panels of customised sizes say 900 mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA3105 of 2.0 mm thick. Screen panels shall have customized perforation as per architects design. Combination of perforations to be provided to suite the design Panels. Panels shall be coated on visible side with NANO technology powder coated as per the architectural intent. The panels of required length and height shall be fixed to Aluminium sub structure of 25X25X1mm by means of GI/Alu guide clamps (Installer’s scope). The provision shall be made for concealed lighting wherever required as per architects directives. Panels shall be bend from all four sides and shall have extended flanges to accommodate clamps and shall be with NRC value 0.5. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete. (REFENENCE DR NO, 26R) F) SEVENTH

Providing and Supplying of screen panel cladding fixed system manufactured by APPROVED MAKES. The Screen panels of customised sizes say 900 mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA3105 of 2.0 mm thick. Screen panels shall have customized perforation as per architects design. Combination of perforations to be provided to suite the design Panels. Panels shall be coated on visible side with NANO technology powder coated as per the architectural intent. The panels of required length and height shall be fixed to Aluminium sub structure of 25X25X1mm by means of GI/Alu guide clamps (Installer’s scope). The provision shall be made for concealed lighting wherever required as per architects directives. Panels shall be bend from all four sides and shall have extended flanges to accommodate clamps and shall be with NRC value 0.5. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete. (REFENENCE DR NO, 26R) G) EIGHTH

Providing and Supplying of screen panel cladding fixed system manufactured by APPROVED MAKES. The Screen panels of customised sizes say 900 mm X 4000 mm as per design requirement shall be manufactured from high corrosion resistant aluminium alloy AA3105 of 2.0 mm thick. Screen panels shall have customized perforation as per architects design. Combination of perforations to be provided to suite the design Panels. Panels shall be coated on visible side with NANO technology powder coated as per the architectural intent. The panels of required length and height shall be fixed to Aluminium sub structure of 25X25X1mm by means of GI/Alu guide clamps (Installer’s scope). The provision shall be made for concealed lighting wherever required as per architects directives. Panels shall be bend from all four sides and shall have extended flanges to accommodate clamps and shall be with NRC value 0.5. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete. (REFENENCE DR NO, 26R) H) NINETH

PROVIDING & FIXING STRUCTURAL GLASS GLAZING OF 51.258 M X 1.3 M SIZES AS PER DRAWING WITH STRUCTURAL ALUMINIUM SECTIONS OF 100 MM X 150 MM POWDER COATED/ANODISED & FRAME OF 1.5M X 0.6M OF ALUMINIUM SECTIONS OF SIZE 35 MM X 35 MM SCREWED ON STRUCTURAL SECTIONS AND SANDWITCHING 5 MM REFLECTIVE TOUGHNED GLASS AND PASTING ON FRAMES BY SPASER TAPES. CUTTING OF GLASS BY F.G. GLASS INDIA PVT. LTD. MUMBAI OR EQUVIVALENT COMPANY TO CUT GLASS IN REQUIRED SHAPES,WITH 20% OPENABLE SHUTTERS OF BRAND SAINT GOBAIN, , BOND WITH SILLICON 789/CS BLACK & WHITE SHADE, AND TAPES OF KOTADIA BRAND (VHP/FOAM TAPE) INCLUDING TRANSPORTATION, LOADING UNLOADING, SCEWING, NUT BOLTING, FINISHING, CLEANING, SCAFOLDING UP TO HEIGHT OF 7.1 METERS ETC. COMPLETE. (REFFER DRAWING NO. 26E ) A) GROUND

PROVIDING & FIXING STRUCTURAL GLASS GLAZING OF 51.258 M X 1.3 M SIZES AS PER DRAWING WITH STRUCTURAL ALUMINIUM SECTIONS OF 100 MM X 150 MM POWDER COATED/ANODISED & FRAME OF 1.5M X 0.6M OF ALUMINIUM SECTIONS OF SIZE 35 MM X 35 MM SCREWED ON STRUCTURAL SECTIONS AND SANDWITCHING 5 MM REFLECTIVE TOUGHNED GLASS AND PASTING ON FRAMES BY SPASER TAPES. CUTTING OF GLASS BY F.G. GLASS INDIA PVT. LTD. MUMBAI OR EQUVIVALENT COMPANY TO CUT GLASS IN REQUIRED SHAPES,WITH 20% OPENABLE SHUTTERS OF BRAND SAINT GOBAIN, , BOND WITH SILLICON 789/CS BLACK & WHITE SHADE, AND TAPES OF KOTADIA BRAND (VHP/FOAM TAPE) INCLUDING TRANSPORTATION, LOADING UNLOADING, SCEWING, NUT BOLTING, FINISHING, CLEANING, SCAFOLDING UP TO HEIGHT OF 7.1 METERS ETC. COMPLETE. (REFFER DRAWING NO. 26E ) B) THIRD

PROVIDING & FIXING STRUCTURAL GLASS GLAZING OF 51.258 M X 1.3 M SIZES AS PER DRAWING WITH STRUCTURAL ALUMINIUM SECTIONS OF 100 MM X 150 MM POWDER COATED/ANODISED & FRAME OF 1.5M X 0.6M OF ALUMINIUM SECTIONS OF SIZE 35 MM X 35 MM SCREWED ON STRUCTURAL SECTIONS AND SANDWITCHING 5 MM REFLECTIVE TOUGHNED GLASS AND PASTING ON FRAMES BY SPASER TAPES. CUTTING OF GLASS BY F.G. GLASS INDIA PVT. LTD. MUMBAI OR EQUVIVALENT COMPANY TO CUT GLASS IN REQUIRED SHAPES,WITH 20% OPENABLE SHUTTERS OF BRAND SAINT GOBAIN, , BOND WITH SILLICON 789/CS BLACK & WHITE SHADE, AND TAPES OF KOTADIA BRAND (VHP/FOAM TAPE) INCLUDING TRANSPORTATION, LOADING UNLOADING, SCEWING, NUT BOLTING, FINISHING, CLEANING, SCAFOLDING UP TO HEIGHT OF 7.1 METERS ETC. COMPLETE. (REFFER DRAWING NO. 26E ) C) FIFTH

PROVIDING & FIXING STRUCTURAL GLASS GLAZING OF 51.258 M X 1.3 M SIZES AS PER DRAWING WITH STRUCTURAL ALUMINIUM SECTIONS OF 100 MM X 150 MM POWDER COATED/ANODISED & FRAME OF 1.5M X 0.6M OF ALUMINIUM SECTIONS OF SIZE 35 MM X 35 MM SCREWED ON STRUCTURAL SECTIONS AND SANDWITCHING 5 MM REFLECTIVE TOUGHNED GLASS AND PASTING ON FRAMES BY SPASER TAPES. CUTTING OF GLASS BY F.G. GLASS INDIA PVT. LTD. MUMBAI OR EQUVIVALENT COMPANY TO CUT GLASS IN REQUIRED SHAPES,WITH 20% OPENABLE SHUTTERS OF BRAND SAINT GOBAIN, , BOND WITH SILLICON 789/CS BLACK & WHITE SHADE, AND TAPES OF KOTADIA BRAND (VHP/FOAM TAPE) INCLUDING TRANSPORTATION, LOADING UNLOADING, SCEWING, NUT BOLTING, FINISHING, CLEANING, SCAFOLDING UP TO HEIGHT OF 7.1 METERS ETC. COMPLETE. (REFFER DRAWING NO. 26E ) D) SIXTH

PROVIDING & FIXING STRUCTURAL GLASS GLAZING OF 51.258 M X 1.3 M SIZES AS PER DRAWING WITH STRUCTURAL ALUMINIUM SECTIONS OF 100 MM X 150 MM POWDER COATED/ANODISED & FRAME OF 1.5M X 0.6M OF ALUMINIUM SECTIONS OF SIZE 35 MM X 35 MM SCREWED ON STRUCTURAL SECTIONS AND SANDWITCHING 5 MM REFLECTIVE TOUGHNED GLASS AND PASTING ON FRAMES BY SPASER TAPES. CUTTING OF GLASS BY F.G. GLASS INDIA PVT. LTD. MUMBAI OR EQUVIVALENT COMPANY TO CUT GLASS IN REQUIRED SHAPES,WITH 20% OPENABLE SHUTTERS OF BRAND SAINT GOBAIN, , BOND WITH SILLICON 789/CS BLACK & WHITE SHADE, AND TAPES OF KOTADIA BRAND (VHP/FOAM TAPE) INCLUDING TRANSPORTATION, LOADING UNLOADING, SCEWING, NUT BOLTING, FINISHING, CLEANING, SCAFOLDING UP TO HEIGHT OF 7.1 METERS ETC. COMPLETE. (REFFER DRAWING NO. 26E ) E) SEVENTH

PROVIDING & FIXING STRUCTURAL GLASS GLAZING OF 51.258 M X 1.3 M SIZES AS PER DRAWING WITH STRUCTURAL ALUMINIUM SECTIONS OF 100 MM X 150 MM POWDER COATED/ANODISED & FRAME OF 1.5M X 0.6M OF ALUMINIUM SECTIONS OF SIZE 35 MM X 35 MM SCREWED ON STRUCTURAL SECTIONS AND SANDWITCHING 5 MM REFLECTIVE TOUGHNED GLASS AND PASTING ON FRAMES BY SPASER TAPES. CUTTING OF GLASS BY F.G. GLASS INDIA PVT. LTD. MUMBAI OR EQUVIVALENT COMPANY TO CUT GLASS IN REQUIRED SHAPES,WITH 20% OPENABLE SHUTTERS OF BRAND SAINT GOBAIN, , BOND WITH SILLICON 789/CS BLACK & WHITE SHADE, AND TAPES OF KOTADIA BRAND (VHP/FOAM TAPE) INCLUDING TRANSPORTATION, LOADING UNLOADING, SCEWING, NUT BOLTING, FINISHING, CLEANING, SCAFOLDING UP TO HEIGHT OF 7.1 METERS ETC. COMPLETE. (REFFER DRAWING NO. 26E ) F) EIGHTH

PROVIDING & FIXING STRUCTURAL GLASS GLAZING OF 51.258 M X 1.3 M SIZES AS PER DRAWING WITH STRUCTURAL ALUMINIUM SECTIONS OF 100 MM X 150 MM POWDER COATED/ANODISED & FRAME OF 1.5M X 0.6M OF ALUMINIUM SECTIONS OF SIZE 35 MM X 35 MM SCREWED ON STRUCTURAL SECTIONS AND SANDWITCHING 5 MM REFLECTIVE TOUGHNED GLASS AND PASTING ON FRAMES BY SPASER TAPES. CUTTING OF GLASS BY F.G. GLASS INDIA PVT. LTD. MUMBAI OR EQUVIVALENT COMPANY TO CUT GLASS IN REQUIRED SHAPES,WITH 20% OPENABLE SHUTTERS OF BRAND SAINT GOBAIN, , BOND WITH SILLICON 789/CS BLACK & WHITE SHADE, AND TAPES OF KOTADIA BRAND (VHP/FOAM TAPE) INCLUDING TRANSPORTATION, LOADING UNLOADING, SCEWING, NUT BOLTING, FINISHING, CLEANING, SCAFOLDING UP TO HEIGHT OF 7.1 METERS ETC. COMPLETE. (REFFER DRAWING NO. 26E ) G) EIGHTH

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

Supply & fixing of rock / stone finished full body vitrified steptiles 16mm thick with thick bullnose for ready to install treads and risers and required width wide in plain pattern including cement float filling joints with neat cement slurry natural sand curing and cleaning complete with prior approval of concerned superitending engineer, of Make : Simpolo Vitrified, Akash Ceramic, Inventa Ceramics, INCLUDING ALL LIFTS LEADS TRANSPORTATION & TAXES ETC. COMPLETE AS DIRECTED BY ENGINEER INCHARGE. (REFENENCE DR NO, 26S)

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) A) GROUND

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) B) NINETH

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete. (weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As directed by Engineer- in-charge.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. A) GROUND

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. B) NINETH

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. A) GROUND

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. B) NINETH

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade complete.Spec. No. : As directed by Engineer-in-charge. A) GROUND

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade complete.Spec. No. : As directed by Engineer-in-charge. B) NINETH

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401--Plant Mix Method and Grading - III Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means-Grading I (Using Screening Type A (13.2) mm Aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means-Grading II (Using Screening Type B (11.2mm) Aggregate)

Providing and laying in-situ M 30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand/VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @ 0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75 mm and maintaining the same through out curing period by any other method approved by Engineer-in-charge.

Providing and fixing in position TMT FE 500, 25 mm dia dowel bars precoated with anti corrosive epoxy paint of required Dia. 60 cms. Long and at 30.00cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulk heads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position TMT FE 500, tie bars precoated with anti corrosive epoxy paint of 12 mm dia. 70 cms. long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening, supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.

Cutting transverse contraction joints 3 to 4 mm wide and depth 60 mm. in concrete slab using concrete cutting machine with diamond studded saw with in 48 hours of casting of bay/slab etc. complete including subsequent widening of the groove 8 to 10mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS:5212-1989 in to sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm. to 4mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet/air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)

SUPPLYING AND LAYING TRUE TO LINE AND LEVEL HIGH GRIP, SCRATCH RESISTANT NEUTRAL TO UV RAYS, FULL BODY ROCKDECK VITRIFIED TILES OR EQUIVALENT CONFORMING TO IS: 15622-2006 & IS 4457-2007 AND TESTED IN ACCORDANCE WITH IS: (NON-MODULAR SIZES FOR TILES WITH SKID RESISTANCE :0 6 MOHR’’S HARDNES > 7.0, STAINING RESISTANCE: CLASS-I WATER ABSORPTION E < 0.5%) & MOR > 35N/SQ.MM AND BREAKING STRENGTH > 1500 N FOR OUTDOOR AREA OF BUILDING E.G. GANGWAY, CORRIDOR, DRIVEWAY, PARKING LOTS, COURTYARDS, SLOPING RAMPS, ENTRANCE LOBBIES, PATIOS, PORTICO ETC. SET OVER NECESSARY UNDERLAY AND 2 MM THIK CEMENT SLURRY AT BACKSIDE OF TILES USING CEMENT @ 2.91 KG/SQM. JOINTS GROUTED WITH ADMIXTURE OF WHITE CEMENT AND COLOURING PIGMENT TO MATCH WITH COLOUR OF TILES AND REMOVAL OF WAX COATING OF TOP SURFACE OF TILES WITH WARM WTALER AND CLEANING THE TILES USING SOFT AND DRY CLOTH COMPLETE INCLUDING ALL LIFTS,LEADS, TRANSPORTATION & TAXES ETC. COMPLETE THE COST OF MATERIALS, LABOUR AND ALL OTHER INCIDENTAL CHARGES COMPLETE INCLUDING SLURRY BUT EXCLUDING THE COST OF UNDERLAY AND TRUE TO THE MANUFCATURER’S SPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE OF SIZE 1200MM X 600MM, 16MM THICK (PRIOR PERMISSION OF S.E. SHALL BE OBTAINED FOR INCLUSION OF THIS ITEM IN THE ESTIMATE) (REFENENCE DR NO. 26V)

Providing and fixing fiber reinforced polymer dome of 6.00 m dia. comprising of hallow sections made of 9 mm thick FRP as per the photograph and drawings, casted on sculptor approved by NMRDA including preparation of clay/pop model (model to be approved by the project architect), making die, casting of FRP dome, preparation of base for painting with DUCO brand putty & primer, one coat of DUCO brand automotive paint of white colour and two coat of weatherproof white colour of DUCO brand and lacer of DUCO brand, finishing , packing for transportation to site, loading, unloading, installation with the help of crane, scaffolding up to 5.00 m. height above the terrace slab level,fittings & fastening , anchor bolts, nut bolts, remaking the damaged surface, jointing the casted pieces on site ,finishing of joints ,cleaning, finishing by final lacer coat of DUCO brand at site, etc. complete as directed by engineer-in-charge. (REFENENCE DR NO, 26W)

Providing and fixing stainless steel (Grade304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50 mm dia. pipe, 1.5 mm thickness and weight 1.92 kg / r. metre

Providing and fixing 50 mm dia meter and 1.5 mm thick Stainless steel hand railing in S.S. 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. Complete

DESIGN, SUPPLY, FABRICATION AND ERECTION OF SUITABLE TENSILE MEMBRANE STRUCTURE INCLUDING ALL NECESSARY FIXING ARRANGEMENTS, IN ( BUILT UP SECTIONS) SECTION FROM PLATE & FLAT SECTIONS , CONNECTING BEAMS, FIXING OF BASE PLATES WITH NECESSARY BRACKETS AS PER DESIGN PROVIDED BY THE ARCHITECT THE TECHNICAL SPECIFICATIONS FOR STRUCTURE SHALL BE DESIGNED AS PER IS : 875 (PART 1, 2, &3), STRUCTURAL SECTIONS USED SHALL BE CONFORMING TO IS 1161 & 4923, THE ERECTED STRUCTURE SHALL BE WITHIN SPECIFIED TOLERANCES AS PER IS: 12843,FABRIC USED SHALL BE OF SATTLER (PRO-TEX) MAKE (AUSTRIA),WARRANTY FOR FABRIC SHALL BE 12 YEARS FOR TYPE 1(700 GSM) AND 15 YEARS FOR TYPE 2 ( 900 GSM),THE STRUCTURE SHALL BE PAINTED WITH TWO COATS OF SUITABLE RED OXIDE PRIMER AND SUITABLE EPOXY PAINT OF DESIRED COLOR, FABRIC FIXING SHALL BE ACCORDING TO THE DESIGNING ( CATENARIES EDGE OR FIXED EDGE ) INCLUDING FABRICATING, FIXTURES & FASTENERS, FIXING & INSTALLING , NECESSARY WELDING, FIXING BY NUTS AND BOLTS, , CLEANING, FINSHING , SCAFOLDING 1.5 M ABOVE GROUND LEVEL, PACKING , TRANSPORTATION , LOADING, UNLOADING, INSTALLATIONINCLUDING ALL LIFTS,LEADS, TRANSPORTATION & TAXES ETC. COMPLETE. AS DIRECTED BY ENGINEER-IN-CHARGE. (REFENENCE DR NO, 26X)

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. A) GROUND

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. B) FIRST

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. C) SECOND

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. D) THIRD

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. E) FOURTH

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. F) FIFTH

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. G) SIXTH

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. H) SEVENTH

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. I) EIGHTH

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. A) GROUND

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. B) FIRST

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. C) SECOND

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. D) THIRD

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. E) FOURTH

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. F) FIFTH

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. G) SIXTH

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. H) SEVENTH

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. I) EIGHTH

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. J) NINETH

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. A) GROUND

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. B) FIRST

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. C) SECOND

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. D) THIRD

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. E) FOURTH

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. F) FIFTH

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. G) SIXTH

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. H) SEVENTH

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. A) GROUND

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. B) FIRST

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. C) SECOND

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. D) THIRD

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. E) FOURTH

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. F) FIFTH

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. G) SIXTH

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. H) SEVENTH

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. I) EIGHTH

.Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. J) NINETH

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. A) GROUND

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. B) FIRST

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. C) SECOND

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. D) THIRD

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. E) FOURTH

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. F) FIFTH

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. G) SIXTH

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. H) SEVENTH

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. I) EIGHTH

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. J) NINETH

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. A) GROUND

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. B) FIRST

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. C) SECOND

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. D) THIRD

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. E) FOURTH

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. F) FIFTH

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. G) SIXTH

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. H) SEVENTH

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. I) EIGHTH

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. J) NINETH

Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15 Kg/meter with necessary fittings. and remaking good the demolished portion and applying primer of anticorrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. A) NINETH

Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. A) SECOND

Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. B) NINETH

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. A) SECOND

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. B) NINETH

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. A) FIRST

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. B) SECOND

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. C) THIRD

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. D) FOURTH

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. E) FIFTH

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. F) SIXTH

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. G) SEVENTH

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. H) EIGHTH

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. I) NINETH

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. A) GROUND

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. B) SECOND

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. C) NINETH

Providing and fixing screw down for 65 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. A) NINETH

Supplying & installing gun metal gate valve of size 20mm dia as per specification No. FF-VL/GV

Supplying & installing gun metal gate valve of size 25mm dia as per specification No. FF-VL/GV

Supplying & installing gun metal gate valve of size 50mm dia as per specification No. FF-VL/GV

Supplying and installing75/80 mm dia end line strainer for +ve suction as per specification No. FF-VL/ELS

Supplying & Installing cast iron double flange butterfly valve of size 75/80 mm dia. as per specification No. FF-VL/BFV

Supplying and erecting C.I. flange 50mm.dia with necessary nuts bolts and washers with rubber seal in position.

Supplying and erecting C.I. flange 65mm. dia with necessary nuts bolts and washers with rubber seal in position.

Supplying and erecting C.I. flange 75/80mm.dia with necessary nuts bolts and washers with rubber seal in position.

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) A) SECOND

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) B) NINETH

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) A) GROUND

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) B) FIRST

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) C) SECOND

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) D) THIRD

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) E) FOURTH

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) F) FIFTH

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) G) SIXTH

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) H) SEVENTH

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) I) EIGHTH

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. A) GROUND

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. B) FIRST

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. C) SECOND

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. D) THIRD

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. E) FOURTH

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. F) FIFTH

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. G) SIXTH

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. H) SEVENTH

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. I) EIGHTH

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete A) GROUND

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete B) FIRST

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete C) SECOND

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete D) THIRD

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete E) FOURTH

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete F) FIFTH

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete G) SIXTH

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete H) SEVENTH

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. Complete I) EIGHTH

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. A) GROUND

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. B) FIRST

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. C) SECOND

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. D) THIRD

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. E) FOURTH

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. F) FIFTH

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. G) SIXTH

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. H) SEVENTH

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. I) EIGHTH

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. J) NINETH

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. Complete A) SECOND

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. Complete B) NINETH

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) A) GROUND

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) B) FIRST

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) C) SECOND

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) D) THIRD

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) E) FOURTH

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) F) FIFTH

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) G) SIXTH

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) H) SEVENTH

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) I) EIGHTH

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) J) NINETH

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. A) GROUND

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. B) FIRST

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. C) SECOND

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. D) THIRD

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. E) FOURTH

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. F) FIFTH

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. G) SIXTH

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. H) SEVENTH

Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. I) EIGHTH

Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including Strap with earthenware foot rests, cast irons oil and vent pipe up to out side face of the wall 1:2:4 brick bat lime concrete bedding with out flushing tank and its accessories etc. complete. A) GROUND

Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including Strap with earthenware foot rests, cast irons oil and vent pipe up to out side face of the wall 1:2:4 brick bat lime concrete bedding with out flushing tank and its accessories etc. complete. B) FIRST

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. A) GROUND

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. B) FIRST

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. C) SECOND

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. D) THIRD

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. E) FOURTH

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. F) FIFTH

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. G) SIXTH

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. H) SEVENTH

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. I) EIGHTH

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete A) GROUND

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete B) FIRST

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete C) SECOND

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete D) THIRD

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete E) FOURTH

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete F) FIFTH

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete G) SIXTH

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete H) SEVENTH

Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete I) EIGHTH

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) A) GROUND

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) B) FIRST

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) C) SECOND

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) D) THIRD

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) E) FOURTH

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) F) FIFTH

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) G) SIXTH

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) H) SEVENTH

providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) I) EIGHTH

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. A) GROUND

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. B) FIRST

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. A) GROUND

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. B) FIRST

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. C) SECOND

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. D) THIRD

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. E) FOURTH

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. F) FIFTH

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. G) SIXTH

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. H) SEVENTH

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. I) EIGHTH

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. J) NINETH

Providing and fixing Autoclosing pillar cock of pressmatic tap of Jaguar make or equivalent including all fixtures, fittings etc. complete. A) GROUND

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. A) GROUND

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. B) FIRST

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. C) SECOND

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. D) THIRD

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. E) FOURTH

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. F) FIFTH

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. G) SIXTH

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. H) SEVENTH

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. I) EIGHTH

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. A) GROUND

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. B) FIRST

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. C) SECOND

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. D) THIRD

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. E) FOURTH

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. F) FIFTH

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. G) SIXTH

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. H) SEVENTH

Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. I) EIGHTH

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. A) GROUND

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. B) FIRST

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. C) SECOND

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. D) THIRD

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. E) FOURTH

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. F) FIFTH

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. G) SIXTH

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. H) SEVENTH

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. I) EIGHTTH

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. A) GROUND

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. B) FIRST

Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete." A) GROUND

Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete." B) FIRST

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. A) GROUND

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. B) FIRST

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. C) SECOND

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. D) THIRD

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. E) FOURTH

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. F) FIFTH

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. G) SIXTH

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. H) SEVENTH

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. I) EIGHTH

Providing and fixing coloured glazed earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32mm dia. P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection up to the outside face of the wall. A) GROUND

Providing and fixing 15mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete. A) GROUND

Supplying and erecting Non return valve 40mm diain position made of gun metal

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres A) SECOND

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres B) THIRD

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres C) FOURTH

Providing and fixing 80mm diameter water meter with nonreturn valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].

Providing and laying in trenches 80 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes ?of 8.57 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 40mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.

Supplying and erecting storage type Horizontal / vertical water heater 15 Litres capacitywith BEE 5 STAR RATING high impact resistance Engineering plastic body on wall / loft as per specification No. AP-WH/STWH

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50 cycles nominal cooling capacity of 40 liters per hour and storage capacity 80 liters with partially stainless steel body As per specification No. APWCR/WC

Supplying & Installing, Testing & Commissioning of ETC Solar water heating system without heat exchanger type of 500 LPD capacity as per specification No. ESD-SHWS-ETC

Supplying & Installing, Testing & Commissioning of ETC Solar water heating system without heat exchanger type of 100 LPD capacity as per specification No. ESD-SHWS-ETC

Supplying & Installing, Testing & Commissioning of ETC Solar water heating system without heat exchanger type of 200 LPD capacity as per specification No. ESD-SHWS-ETC

Supplying and erecting Non return valve 25mm dia in position made of gun metal

Supplying and erecting0-100 lb/sq. inchpressure gauge having 4" dia complete with socket for 1/2" G.I. pipe.

Supplying and installing DANFOSS make pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification No. FF-FFA/PS

Supplying and erecting Non return valve 50mm dia in position made of gun metal.

Supplying and erectingNon return valve 65mm dia in position made of gun metal.

Supplying and erecting 75/80mm dia. cast iron foot valve at position with necessary materials.

Supplying and erecting C.I. flange 50mm.dia with necessary nuts bolts and washers with rubber seal in position.

Supplying and erecting C.I. flange 65mm. dia with necessary nuts bolts and washers with rubber seal in position.

Supplying and erecting C.I. flange 75/80mm.dia with necessary nuts bolts and washers with rubber seal in position.

Supplying and erecting submersible pump set suitable for erection on open well ofrequired HP with 415 V 50 c/s.A.C. supply, having delivery head from 21 to 7 m and discharge from 200 to 800 Itrs. per minute (Max efficiency at 16 m head & 500 Itr discharge) & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No. WP-OSP

Supplying & erectingautomatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HPconsisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof encloser with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase inbalence etc ( Similar to LT model no.MU G6/ CAT NO. SS97756 )

Supplying & erecting Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 7.5 HP with discharge 4.5/8.6 Liters per second (LPS) for head of 32/52 m and 65 mm suction/ 50 mm delivery pipe of size or with discharge of 11.1/19.9 Liters per second (LPS) for head of 16/30 m and 80mm suction/ 65mm delivery pipe of size, on provided C.C. foundation as per specification No. WP-CGP

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5- 10 HP consisting of DOL starter having relay range 13-21 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof encloser with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase inbalence etc ( Similar to LT model no.MU G10 / CAT NO. SS95983 )

Supplying and erecting storage type Horizontal / vertical water heater 25 Litres capacitywith BEE 5 STAR RATING high impact resistance Engineering plastic bodyon wall / loft as per specification no.AP-WH/STWH

Providing and installing bio digester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories upto 3 meter length, excluding the necessary excavation for installing the bio digester. Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33%Percentage of polyester resin: - 66.67%Water absorption (as per ASTM):-0.30%Flammability as per ASTM Tensile strength:-115 MPA Specific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2Heat defection/distort temperature:-65deg CCorrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mm Outlet pipe size rigid PVC:-80mm Gas outlet rigid PVC with Valve: 20mmBacteria immobilization PVC mattes (on all partition) With DRDO TOT licensee and latest batch certificate (month & year of supply) and capacity as below

L) Upto 500 user size (6mx2.0mx1.6m), Capacity of Biodigester:-20000 liters, Area of top, bottom and side walls:-50.72 sq.m, Area of partition walls:13.36 sq.m, Total weight of FRP:-917.86 kg, Bacteria in oculums quantity:-7000 liters, Minimum thickness of side walls/top and bottom:9mm, Number of inside partitions:-4, Minimum thickness of partition wall: 4mm

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46x36cm and one no SS304 hinge drail 76 cms & three no SS304 of (Grab Bar) 60 cms all including cutting and making good the walls and floors wherever required, seat cover, cistern & wash basin fittings, nuts, bolts and gasket etc complete of make Hind ware (Matrix series 70002)/Cera or equivalent as per the direction of Engineer-In-charge.

Supplying and installing G.I. pipe above ground of 'C' class ERW of size 100 mm dia with necessary fittings

Supplying and installing G.I. pipe above ground of 'C' class ERW of size 75/80 mm dia with necessary fittings

Supplying and installing gun metal gate valve of size 25mm dua

Supplying and installing double flange NRV of size 100 mm dia as per specification No. FF-VL/NRV

Supplying & Installing cast iron foot valve ball type / flap type of size 100 mm dia. With strainer for negative suction as per specification No. FF-VL/BFV

Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia. as per specification No. FF-VL/BFV

Supplying and erecting 20/25 mm dia G M air release cock with necessary G I coupling to be fittied on top of air vessel or on wet riser

DIESEL ENGINE: Supply of Diesel Engine driven Pump with Flow = 97m3/Hr (1620LPM) & Head of 56 Mtrs having back-pull-out design with Std Diesel Engine Scope of supply End Suction Pump in Std construction with bronze impeller Coupled with diesel Engine of 70HP, 2000RPM complete with base plate. Coupled Foundation BOLTS accessories for the Diesel Engine pump set shall comprise of Diesel Tank & 1 ser of battery, cable & leads.

Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, 1800lpm AT 76 M head centrifugal type 50 HP (37 KW) 3 phase 415 Volt 50 hz

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of jockey pump of 240 LPM at 56 m head, 15 HP (11 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/JP

Supplying installing testing, commissioning of Booster pump of 900 LPM at 40 mtr head 12.5 HP either monoblock

CONTROL PANEL FOR FIRE PUMPS Providing installing & commissioning automatic Starter panel switchgear unit for the main hydrant pump, jockey pump to suit the motor H p for the rated capacity & desired head of the pump comprising of automatic switch unit isolator , pressure switches to set operating pressure , switches rated to 440-V,50HZ supply

Supplying and installing pressure gauge of 100 mm 0., 0-300 PSI or 0- 14 kg per cm square fitted with 12/15 mm 0. pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG Pressure Switch(PS)

Supplying and installing DANFOSS make pressure switch with 12/15 mm 0 isolation valve,G.I. nipple, elbow etc. in an approved manner as per specification No. FF-FFA/PS Orifice Plate(OP)

Supplying and installing fire brigade Header (Siamese Connection) of 150 mm 0 for supplying water to wet riser system

Stainless steel landing valve single head dia.3mm (Type A) ISI marked IS 5290 complete in all respects

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Supplying fire fighting R.R.L. Hose pipe, 63mm dia,15m in length, fitted with necessary accessories complete

Supply Stainless steel branch pipe of 63 mm dia. Fitted with 20mm dia. ISI markes IS 903 complete in all respect

Supplying and erecting ABC powder type fire extinguisher as per 13849 of 6 KG capacity with necessary clamp for erection on wall

Supplying & erecting carbon dioxide ( CO2) fire extinguisher of 4.5 kg capacity cartridge type conf. to is 2878 cinokete erected wutg becessart ckano nade fribt 50 * 6 mm M S flat with nut & bolts grouted in wall complete

Priming Tank -- Supply & Installing one Piece moulded HDP/ Fiber water tank. For -ve suction only, having capacity 1000 ltrs. Fitted with necessary accessories complete as per specification No. FF-FFA/PT

Fire Door: NON CSR Fire Proof Doors Rating 2% hours fire resistance of opening sizes with panic bar 1200W x 2100H

Supply & installation of (Fire Alarm Control Panel,) Wall-monted Modularized, Maximum 4 Loops, 750 addressable devices, built-in printer, 60 Zone Indication, Big Screen, 2 Bell Circuit, Integrated PSU with battery charger, including Battres, supplied with 2 loops as standard including finishing, cleaning, transportation, loading, unloading & also including all taxes ............... erc complete.

Supply & installation of Addressable Loop Sounder (Hooter) shall be capable of monitoring and controlling two independent circuits of alarm sounders using a single loop address 24VDC power to drive the sounders shall be derived independently from the FACP, (Certificated by LPCB) including finishing, cleaning, transportation, loading, unloading & also including all taxess .................... etc complete.

Supply & install ation of Addrssable Manual Call Point Semi Flush Mounting Re-settable (Non-Nreaking Glass), Supplied with Special Reset Tool - Compatibel with both I & DI Series the addressable call points shall provided with an integral red LED to indicate activation (Certified by LPCB) including finishing, cleaning, transportation, loading, unloading & alos including all taxes ........... etc. complete.

Supply & installlation of Remote Response Indicator unit shall provide & remote indication for any detector that may belocated in an enclosed or locked compartment. The remote indicator unit shall be driven directly from its associated local detector. Including finishing, cleaning, transportation, loading, unloaing & also including all taxes ........... etc complete.

Supply & installation of (isolator Base) Base Mounted isoaltor upto 20 devices (Certificated by LPCB including finishing, cleaning, transportation, loading, unloading & alos including all taxes ……….. etc complete.

Supply & installation of ( Addressable Multi Sensor Detectro with base) Intelligent Combined Optical Smoke, Fixed Temperature and Rate of Rise Heat Detector, Drift Compensation, Sensitivity Adjustmen, 8 bit Processor with Remote Indicator Output (LPCB) including fininishing, cleaning, transportation, loading, unlaoding & alos including all taxes ............... etc complete.

Supply & Installation of Addressable Heat Detector with Base Intelligent Fixed, Temperature and Rate of Rise Heat Detector, 8 Bit Processor with Remote Indicator Output including finishing, cleaning, transportation, loading, unloading & alos including all taxes ........... etc complete.

Supplying, Installation, Testing and Commissioning of FRLS 2c x 1.5 sq. mm. cable in PVC insulated and screened stranded coper wire etc. complete as per directions of engineer in charge including finishing, cleaning, transportation, loading, unlaoding & also including all taxes ........... etc complete. complete. A) 2C x 1.5 sq. mm.

Supplying, Instalation, Testing And Commissioning of FRKS 2c x 1.5 sq. mm. cable in PVC insulated and screened stranded copper wire etc. complete as per directions of engineer in charge including fininshing, cleaning, transportation, loading, unloading & also including all taxes........... etc complete. B) 24V power supply cable for hooters etc complete.

Carrying out Mix design with all Tests on basic materials of concrete of various grade from the material collected at site in the laboratory including conveying all required material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.i) M-25 Grade

Carrying out Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness (BASIC TEST OF CEMENT) in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Carrying out test of crusher agreegate transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

v) Sieve lanalysis

vi) Flakiness Index

vii) Abrasion Value

Carrying out test of sand transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Fineness modules & Silt Content

ii) Silt Factor

iii) Choride and sulphate Contain

Carrying out Standard of Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) on Bricks in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Carrying out Standard test of water Absorption , Specific Gravity on Flooring stones (Natural Stone like Kota, Marble, Granite, Tandur etc.) in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Carrying out Standard test of Water Absorption, Modules of Rapture (Set of 6 Tiles) on CERAMIC TILES / VITRIFIED TILES in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete

Carrying out test of concrete casted at site in the form of cubes of 150x150x150mm size casted during conctering in the laboratory including conveying the cubes/material to laboratory, all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Compessive strength

Carrying out test of PH Value, Sulphate & Chloride Content on Water in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete.

Carrying out various test of HYSD / TMT /FE-500 Steel transported from various sources at site in the laboratory including conveying the material to laboratory, all all labours, technician, tools and obtaining the test result form local / district/ regional laboratory etc. complete. i) Weight / metre, ii) Ultimate tensile stess, iii) Yield stress, iv) Elongation Test, a) Upto 16mm dia.

b) Above 16mm dia.

Plasticity of Index for murum

Royalty Charges on Mining materials used in construction. A) SAND

Royalty Charges on Mining materials used in construction. B) MURRUM

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6/16 A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30 A, 3 pin plug & earth socket and 30 A 3 pin plug top with 30 A. triple pole MCB complete erected on angle iron frame.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to match the background in an approved manner. (FOR 5/15A SS, 5A SS)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to match the background in an approved manner. (FOR 2X5A, 2X15A, AC SS)

Supplying & laying ISI mark Rigid Steel conduit 16 SWG - 25 mm. dia. with necessary accessories as per specification No: WG-A/CC, para no.1.2.3

Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying & erecting mains with 3x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (3) Rates for the earth wire shall be calculated as one half rate of mains of bunch of two wire.)

Supplying & erecting mains with 3x2.5 Sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting modular type T.V. socket single outlet ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to match the background in an approved manner. (TV, Tel Socket, "D" Connecter)

Supplying & erecting telephone cable 2 pair with 0.5 mm dia. Laid in provided PVC casing / conduit as per specification no. WG-TW

Supplying & erecting telephone cable 10 pair with 0.5 mm dia. Laid in provided PVC casing / conduit as per specification no. WG-TW

Supplying & installing Co-axial cable low voltage grade RG-11 as per specification No. WG-TW

Supplying & installing UTP networking Cat-6+ cable suitable for LAN /WAN Computer net-working as per specification no. WG-COC/NC

Supplying, installing & testing UTP Connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying, erecting & commissioning Junction box suitable for 10 pairs as per specification no. WG-TW

Supplying and erecting LED Flood light fitting of 120W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying, installing, testing and commissioning solar street light pole comprising of 14W LED fitting, 12V 36Ah maintenance free lithium battery, min. 75Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete. Specification no. ESD-SOL-STL ( with 5 years warrantee )

Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL (NEW)

Supplying, installing, testing and commissioning solar street light pole comprising of 9 W LED fitting, 12V 18Ah maintenance free lithium battery, min. 40 Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete. Specification no. ESD-SOL-STL ( with 5 years warrantee )

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED panel ( slim edge-lit) light suitable for 13W to18W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.

Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC

Supplying and erecting LED street light fitting 12 to 18 W, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.

Supplying and erecting fan hook of 10mm MS round bar grouted in RCC slab with making the site as original.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC

Providing & erecting 4 m high (clear height) galvanised OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification No.OH-PL/OPL

Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL (NEW)

Providing & erecting 6 m high (clear height) galvanised OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification No. OH-PL/OPL

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC

Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FG-ODF/FLS2.

Supplying & erecting FRP box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete on pole/wall as per specification No.CB-SB

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP

Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/ SAC

Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity complete. Specification no. ESD-SHWS-ETC (hostel block : 242 rm x 4 person = 968 person x 15 ltr each person =14520 ltr required. hence, 14520/500 ltr =29 nos. of 500 ltr.water heater required) 1 NO. QUARTER BUILDING (Make: TATA, Jain)

Supplying and erecting 20/25 mm (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for solar water heater system complete. Specification no. (ESD-HWP/PCP)

Providing and fixing high-density polyethylene (HDPE) container one piece moulded water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Incomer :Providing & erecting 3 Pole MCCB of 600/630 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB

Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars, 500V 800A complete as per specification no. CP-BB

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

supplying & erecting set of 3 pilot lamps all bakelite with colour glasses with miniature lamps 230V/250V erected on provided CRCA box with panel type fuses & connected with PVC wires.

Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No! SW-SWR/MCCB

Providing & erecting 3 Pole MCCB of 250A,415V capacity with S.C. rating 36 kA (Ics=100% of Icu),thermal and magnetic setting with provided leads on iron frame/wooden board as per specification No. SW-SWR/MCCB

Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A complete as per specification no. CP-BB

Providing & erecting 3 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron frame/wooden board as per specification No. SW-SWR/MCCB

Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A complete as per specification no. CP-BB

Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB - (Flat - 8 nos.,Spare)

Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars, 500V 100A complete as per specification no. CP-BB

Supplying and erecting 200 kVAr, 440 V 3 phase, 50 Hz., thyrister switched micro APFC passive filter panel, consisting of suitable steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/APFC

Supplying & erecting automatic control panel for 3 Ph, 415 volt, a.c. Submersible/centrifugal pump set for 7.5 to 10 HP consisting of DOL starter having relay range 13-21 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 6 ways for outgoingSP MCB’s on iron/ G.I. frame/wooden board as per specification No. SWSWR/ MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 10 ways for outgoingSP MCB’s on iron/ G.I. frame/wooden board as per specification No. SWSWR/ MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways, on iron frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways, on iron frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB

Supplying, erecting & marking DPMCB 40A to 63A, Cseries (for motor/power) in provided distribution board as per specification No.SW-SWR/MCB

Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40A2 pole complete as per specification No. SW-RCCB/RCCB

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SWSWR/ MCB

Providing, erecting & commissioning RCCBof electro magnetic typewith 30/100/300 mA sensitivity and having capacity of 63A. 4 pole complete as per specification No. SW-RCCB/RCCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6Ato 32A, C-series (for motor/power) in provided distribution board as per specification No.SW-SWR/MCB

Supplying and erecting blanking plate of suitable size on MCB DB

Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 2 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & laying (including excavation) 15 cm dia half round RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying and erecting Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying & fixing 25 mm x 5 mm Al strip for loop earthing in ground / on surface etc. as required. (0.4 Kg/Mtr)

Supplying and erecting G.l. earth wire 14 to 6 SWG complete erected on wall with necessary clamps in an approved manner for earthing or any other purposes with copper lugs cable sockets of 30A & more at each end with necessary cadmium plated double nut & bolts with washers & covering it with bituminous compound.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner

Supplying and erecting Galvanised cast iron earth plate size 60 x 60 x 0.6 cms. with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall with insulating and non-corrosive bond in an approved manner with required joints. As per specification no. EA-EP.

Supply and erection of LED SOLAR GARDEN Light - comprising of 5v - 12 Watts Solar Panel , 6 Watts NICHIA Japan Make LED SMD , 3.2 V/ 15 Ah LiFeP04 Battery, Complete mounted on ornamental decorative aluminum di-cast pole , duly shot blasted and P. U. painted , 2.5 mtr. High pole and mounting , structure and 4 nos. foundation bolt including all lead, lifts, transportation, taxes, etc. complete (Approved make : NEXUS, K-LITE, GLOWMAC, PASSOOLITE)

Supply & erecting Solar Garden Light 80 W with LiFeP04 Battery 180 Ah and high efficiency solar panel complete with PU coated 7 mtr. High pole and mounting structure and 4 Nos. foundation bolt. Including all leads , lifts, transportation etc. complete (Approved make: NEXUS, K-LITE, GLOWMAC, PASSOOLITE)

Supply & erecting Solar Garden Light 60 W with 6, 4V/100 Ah LiFeP04 Battery, High efficiency 5v - 12 watts Solar Panel, 50 watts 'CREE' Japan Make LED 6000Ln, complete mounted on ornamental decorative aluminum die-cast pole, duly shot blasted & PU coated 5 mtr high pole and mounting structure & 4 nos. foundation bolt . Including all leads, lifts, transportation, taxes, etc. complete (Approved Make: NEXUS, K-LITE, GLOWMAC, PASSOOLITE)

Supplying and erecting rolled steel joist (girder) pole 200 x 100 mm. (25.9 kg/m) with provided base plate in provided foundation as per specification no. OH-PL/RSJ

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

Supplying and erecting pole bracket, fabricated form ISMC channel, 100 / 50 x 5 mm channel 2.80 m long and welded with extension channel pieces of same size 300 mm. in length, complete erected on pole with pole clamps 50 x 6 mm. MS flat, 15 mm bolts and nuts complete and duly painted with one coat of red oxide and two coats of aluminum paint.

Supplying and erecting Vee cross arm for erecting Insulators with channel length of 45mm for base of insulator & vertical member of suitable length to maintain clearance of 1200 mm horizontally between two insulators with angle of 60 degree to horizontal and the total vertical height of V cross arm as 460mm, welded with MS flat of 80x10mm at centre of cross arm & MS clamp of 80x10 mm at bottom with clamps,nut bolts,washers complete as per specification No. OH-PL/VCA

Supplying and erecting approved make 11 kV out door type gang operated air break, triple pole switch 200A, capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying and erecting approved make, 11 kV out door type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15 Amps capacity complete erected on provided cross arm.

Supplying and erecting Distribution class, 11 kV thyrite type lightening arrester, on provided cross arm as per specification No. OH-INS/LA

Supplying & Fixing of 11 KV Pin insulator set complete with nuts & bolts on the pole as required.

Supplying & Fixing of 11 KV Disc insulator set complete with nuts & bolts on the pole as required.

Supplying and erecting ACSR conductor of size 6/1-2.59 mm.complete. (Weasel) (127.7 kg/km) as per specification No. OH-CON/ACSR

Supplying & erecting 11 kV 630A, Indoor type Ring Main unit with 1or 2 Incoming & 2 or 1 Outgoing with HRC fusescomplete erected on provided cc foundation/MS channels/trench, etc, in an approved manner as per specification no SW-HTS / RMU

Supplying, erecting, testing, commissioning 11 KV H.T. metering cubical (Compact Type) approved by MSEDCL/Licensee fabricated with 2mm.(14 SWG) M.S.sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25x6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( C.T.P.T COVER) interlock with meter doors, epoxy coated 3 nos C.T having required ratio between 5/5A to 100/5A burden 10 VA class 0.2S I.L.12/28/75 KVP epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc complete duly tested by Licensee with necessary Test Certificates and erected on provided plinth/ C.C foundation

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 315 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 1025 Watts at 50% load, 3100 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary permissions of Electrical Inspector, as per specification no SS- TR.

Supplying , erecting & terminating 3 x 120 sq. mm. aluminium 11 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CB-HT

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 sq. mm. with necessary material as per specification No. CB-JT/HT

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT

Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete.

Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in foundation and painted as per specification No SS-AS/FSG

Supplying and erecting double leaf hinged door each 1500mm in width x 1850 mm in height using B class ,GI pipe with angle iron supports, chain link wiremesh (jali) complete supported on channel iron, erected in foundation, and painted as per specification no SS-AS/DLD

shock treatment chart Regional Language

11 KV rubber Hand Gloves pair

First Aid Box

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class C insulation conforming to IS: 15652 – 2006 & CPRI tested having 3mm thickness upto 33 kV

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.

Supply, Installation, Testing and commissioning of UL Certified / CPRI Tested Maintenance Free Earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron Molecular Copper Bonded Earthing Rod of Length 3m along with 25 kg Carbon Based environment friendly backfill Ground Enhancing compound required to fill up the excavated earth with required quantity as per specification no EA-MOBI (DP - 5NOS.,T-OFF Unit - 2nos., TR - 7 NOS., CTPT - 6NOS.)

Supplying & fixing of required size Al strip for loop earthing in ground / on surface etc. as required. (0.56 Kg/Mtr)

Supplying, installing, testing and commissioning of 40 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG (Includes, wiring, required cabling, inverter, PV panels, Fabrication, Lightning arrestor and required accessories, Earthing Pit, etc. ) complete required infrastructure from PV panel to connection to NET Metering. for details refer spcecification No. ESD - RT - ONG Note:- 2. For item no.4-6-2 add Rs. 52380/- per kWp for ON grid solar power pack above 11 kWp upto 100 kWp. (40KW - 11KW = 29KW x Rs. 52380 = Rs. 15,19,020/- . Hence, 11KW Price + 29KW price = Item Price . Rs. 5,76,191+Rs. 15,19,020 = Rs. 20,95,211

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting G.I. pipe „A‟ class 50 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Preparing Lawns (20 cm depth):- Excavating the ground to a required depth of 20 cms, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20cms. mixing garden soil & manure thoroughly well, leveling, watering, on previous night. planting required variety of lawn grass as directed & maintaining till well established by watering, weeding, clipping, rolling etc. complete. Including all leads, lifts, transportation, taxes, etc. complete.

Preparing Edging or Border:- Excavating the ground to a required depth of 20 cms, in the required area, removing and conveying unwanted stuff, rubbish to the required distance as directed. Filling the excavated part with fresh soil and manure in 3:1 proportion to a required height to 20 cms. Mixing, levelling, watering the same planting rooted edging/border plants at distance of 20 cms. apart watering, weeding, stirring of soil, replacing casualties. pruning if necessary etc. complete. Including all leads, lifts, transportation, taxes, etc. complete.

Preparing flower Bed:- Excavating the ground to a required depth of 30 cms, removing and conveying unwanted stuff to a required distance as directed, Filling fresh garden soil and manure in excavated area in 3:1 proportion to a required height of 30cms. Mixing garden soil and manure thoroughly well, levelling, watering, previous night. planting seedling of required annuaral 25cms apart. Maintaining till well established by watering, weeding, stirring replacing of casualties etc. complete. Including all leads, lifts, transportation, taxes, etc. complete.

Planting small & medium size ornamental / Flowering plant:- Digging pit with size 0.6m x 0.6m x 0.6m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and Farm Yard Manure upto a height of 0.60m. in 3:1 proportion. Mixing soil and Manure thoroghly well, levelling, watering on previous night. Planting one to two year old healthy plant saplings as per specification. Maintaining till well established by watering, stirring, of soil and manure. replacing casualties etc. complete. Including all leads, lifts, transportation, taxes, etc. complete.

The Main table shall be of size 2400 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The thickness of the top of the side unit shall be 25mm. since its APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

The Size of the Impress Back unit shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H in APO.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1)Premium Lounge SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn in APO. 3)SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery coverSEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4)BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. TACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T).All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1)SIDE FRAME ASSEMBLY: Premium lounge sofa The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn 3)SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover since its APO *SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4)BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. TACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Table APO - 5630 size shall be 1650 Width mm x 900 Depth mm x 740 Height mm.Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1) SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather at the time of APO. 2) ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.3) ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter giving option of variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2• The mechanism housing should be made up of HPDC Aluminium black powder coated. 4 SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. 5 ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. 6 PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. 7 PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) 8. TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1) SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather since its APO Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D) 3) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area at the time of APO BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2.. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. 5.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6.TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7.PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon since its APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal should be a. BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2.HIGH RESILIENCE (HR) POLYURETHANE FOAM(apo): The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. TUBULAR FRAME: The powder coated ( DFT 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission.The work shall be carried as per the instructions of engineer in charge. Make Godrej/Haworth & Steelcase APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1) CROSS BEAM (APO): It should be made up of black powder coated rectangular M.S.ERW tube having 8.0 ± 0.03 cm x 4.0 ± 0.03 cm x 0.2 ± 0.014 cm size. 2)LEG AND ARMREST: It should be chrome plated made of cold rolled steelwith 0.12 ± 0.013 cm thinkness. 3)SEAT BACK SHELL: It should be powder-coated perforated shell made from cold rolled M.S. sheet (DIN 1023 Part1 ST-12 Grade) 0.15 ± 0.013 cm thickness.The Side Bar should be made of Chrome plated solid steel 3.0 ± 0.03 cm x 1.2 ± 0.3 cm with fluting and plastic inserts. The Shell should be assembled on the Cross Beam with help of M8 Bolts (Per Seat - 8 nos. Seat to Bracket and 4nos. Bracket to Cross Beam).All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1) SIDE TABLE : It should be 12 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. 2) Pshould be A SIDE : It should be a welded Assembly made in SS202 grade having Dia. 12±0.04 as per should be :1762 according to APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

KD Plain With 4 Shelves shall have an overall size of 900mm(W)x450mm(D)x1830mm(H) . The construction shall be rigid knock down construction and Material used shall be prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For Plain 4 Nos. of adjustable full shelves . The top shall be metal and Epoxy Powder coated finish to the thickness of 50 microns since its APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Providing and placing panel based modular workstation of combination of pannel of thickness 52.4mm and thickness 22.8mm with height 1200mm of size 1200mm W X 600mm D X 750 mm H (Worktop) for single seating, comprises of Vertical and horizontal extrusion made up of aluminium extrusion having material AL96063-T6 and have average wall thickness of 1.2 mm, Coated with average 50 to 60 micron thickness of epoxy powder coating. The blocks and metal frame are held together by verticals at both ends of the panel and horizontals between each block and tile. Horizontal extrusions provides slot for mounting accessories on screens and Holding members for fixing top trim and end trim. Panel comprises of Top & Bottom Tile and 2 nos of block in between. It is supported by panel legs which are fabricated by CO2 welded MS Tube of section 38 mm x 25 mm (IS: 7138 ERW Tube, 38 mm x 25 mm x 16bg) with the base plate of the MS of 35x22x5mm IS: 2062, 5 mm HR) over which an M8 Leveler is fitted and Coated with average 50 to 60 micron thickness of epoxy powder coating. Height adjustability upto +50 mm provided by leveler. The block for 52.4 mm panel's thickness comprises of 38mm thick paper honeycomb, plus 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. Top Tiles for 52.4 mm thick panel - Top tiles can be offered in variety of combinations. These tiles are slid in to the panels from top before fixing the top horizontal extrusion. These tiles are supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. Split Top Tiles for 52.4 mm thick panel - These are used for offering two different types of finish in single panels. Split tiles are possible in Fabric magnetic, Whiteboard, Laminated and Powder coated metal tiles. Glass tiles 4 mm thick toughened clear glass is fitted onto both sides of the panel using split horizontal and vertical stiffeners made from 0.6 mm powder coated CRCA steel Grade D as per IS: 513. Bottom Tiles for 52.4 mm thick panel - Bottom tiles made up of metal are press fitted on to the assembly frame of the panel with the help of snap on clips made of nylon-66 and support clips made from PP co polymer. Wish offers simplified wire management to provide neat and clutter free worksurface. Entry of wires through slots in the assembly bottom frame. Press fitted tiles for easy access and serviceability of internal wiring. Concealed conduit in the block for vertical passage of wires and Switches can be mounted on bottom tiles or on Block as per customer requirement at certain locations. The 22.8 mm Panel shall comprise of 2 nos. of vertical extrusions made of aluminium, Horizontal extrusion made of aluminium at every division of tile/ Block. The number of these horizontal extrusions vary as per Panel height. the 22.8 mm panel shall be used as "Fin"panels to provide additional privacy and enclosure while maintaining similar elevations as the 52.4 mm panels. these panel have restricted finishes and no vcable management ability etc.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P panel based modular workstation of combination of pannel.. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Providing and Fixing of Dining Table with Bench- SS Top (Dining Table + 1 Bench) Dining Table ss with attached Bench - Providing and fixing dining table of size 1800x450x750mm made of 1.2 mm thk SS steel sheet grade 202 , frame leg made of 1.5'' SS square pipe.all parts shall be in mirror finish. etc complete Inclusive of all taxes and transportation. Approved Make - Wipro, Godrej, HNI Including all fixtures and fasteners, leads, lifts, transportation and taxes, etc. complete as directed by engineer incharge (item shall be as approved by project architect)

Single Bed Overall Size: Length- 2060.0 mm Width - 1001.0 mm Seating Height - 403.0 mm Total Height - 956.0 mm, Internal Dimensions: Width - 922.0 mm Length - 1980.0 mm, Material: M.S. Pipe in 1.2 mm Thickness.,. Construction: Knockdown construction., Finish: Epoxy powder coated to the thickness of 50 microns (+- 10) in Textured Black Colour.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

FREE STANDING PEDESTAL WITH FLAT METAL FRONT OF SIZE 390W X 435D X 646HT, 3DR = 2 BOX + 1 FILE, CENTRAL LOCKINGAll metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of Engineer in Charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

providing and placing knock down 2 door steel almirah of godrej make slimline or equivalent of dimension 900 x 507 x 1950. with removable skirting,legs attached with screw type leveller , Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Steel Hinged Door. ? Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. ? 3 way 90 Degree Removable key type Cam lock & locking mechanism.2 Nos. Of Full Adj.Shelves etc.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P knock down 2 door steel almirah of godrej make of dimension 900 x 507 x 1950 APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1)Premium Lounge SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn in APO 3)SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery coverSEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) 4)BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. TACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T).All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1) SIDE TABLE : It should be 12 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. 2) Pshould be A SIDE : It should be a welded Assembly made in SS202 grade having Dia. 12±0.04 as per should be :1762 according to APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Enterprise 1650 Enterprise 1650 Table with CPU Hanger size shall be 1650 Width x 9000 Depth x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P Enterprise 1650 Table with CPU Hanger size 1650 Width x 9000 Depthx 728 Height mm APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area at the time of APO BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2.. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. 5.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6.TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7.PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon since its APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Overall Dimensions of All Steel Periodical Display Rack shall be 900mm(W)x450mm(D)x1830mm(H). Rigid Knockdown construction ,Panels shall be made from CRCA 0.6 mm thick and front frame shall be made from CRCA 0.8 mm thick . CRCA D grade as per IS 513 . There shall be 5 level racks , Display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . Receding facility to access the storage behind . Sliding on plastic rollers . Behind storage shelving each of 5 level has a behind storage shelf . Uniformly Distributed Load capacity per each shelf is 40 kg . Leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns etc.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P All Steel Periodical Display Rack shall be 900mm(W)x450mm(D)x1830mm(H). APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Overall Dimensions of Double Sided Steel Book Rack Base Unit shall be 900mm(W)x600mm(D)x1850mm(H).Rigid Knockdown Construction ,Material used shall be CRCA 0.8 mm thick . The Stackability shall be add-on units can be stacked width wise to form a bank of racks having common side panel . Number of adjustable shelf shall be five with 12 loading levels . Uniformly distributed load capacity per each shelf is 80 kg maximum . Shelf back stiffenerat the rear end of the shelves shall be provided . These are to support books on the rear side . Label holder & range indicator on each main unit for inserting labels etc. Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P Double Sided Steel Book Rack Base Unit shall be 900mm(W)x600mm(D)x1850mm(H). APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1) SEAT/BACK: The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound (APO) SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) 2) POWDER COATED UNDERSTRUCTER:The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. 3)SHOE : The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. 4)FABRIC cushion upholsty-BLACK COLOUR.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Table -APO 5size shall be 1650 Width mm x 900 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area at the time of APO BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2.. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. 5.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6.TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7.PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon since its APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1.SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal should be a. BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) 2.HIGH RESILIENCE (HR) POLYURETHANE FOAM(apo): The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 4. TUBULAR FRAME: The powder coated ( DFT 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. ER.W. Tube All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission.The work shall be carried as per the instructions of engineer in charge. Make Godrej/Haworth & Steelcase APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

KD Plain With 4 Shelves shall have an overall size of 900mm(W)x450mm(D)x1830mm(H) . The construction shall be rigid knock down construction and Material used shall be prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For Plain 4 Nos. of adjustable full shelves . The top shall be metal and Epoxy Powder coated finish to the thickness of 50 microns since its APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Single Bed Overall Size: Length- 2060.0 mm Width - 1001.0 mm Seating Height - 403.0 mm Total Height - 956.0 mm, Internal Dimensions: Width - 922.0 mm Length - 1980.0 mm, Material: M.S. Pipe in 1.2 mm Thickness.,. Construction: Knockdown construction., Finish: Epoxy powder coated to the thickness of 50 microns (+- 10) in Textured Black Colour.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Table - T 32 size shall be 900 Width x 590 Depth x 750 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be sq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic etc.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P Table - T 32 size shall be 900 Width x 590 Depth x 750 Height APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

providing and placing knock down 2 door steel almirah of godrej make slimline or equivalent of dimension 900 x 507 x 1950. with removableskirting,legs attached with screw type leveller , Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Steel Hinged Door. ? Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. 3 way 90 Degree Removable key type Cam lock & locking mechanism.2 Nos. Of Full Adj.Shelves etc.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P knock down 2 door steel almirah of godrej make of dimension 900 x 507 x 1950 APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

4 Seater PU Coated size shall be the APO 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

1) SEAT/BACK: The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound (APO) SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) 2) POWDER COATED UNDERSTRUCTER:The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. 3)SHOE : The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. 4)FABRIC cushion upholsty-BLACK COLOUR.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

KD Plain With 4 Shelves shall have an overall size of 900mm(W)x450mm(D)x1830mm(H) . The construction shall be rigid knock down construction and Material used shall be prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For Plain 4 Nos. of adjustable full shelves . The top shall be metal and Epoxy Powder coated finish to the thickness of 50 microns since its APO All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Single Bed Overall Size: Length- 2060.0 mm Width - 1001.0 mm Seating Height - 403.0 mm Total Height - 956.0 mm, Internal Dimensions: Width - 922.0 mm Length - 1980.0 mm, Material: M.S. Pipe in 1.2 mm Thickness.,. Construction: Knockdown construction., Finish: Epoxy powder coated to the thickness of 50 microns (+- 10) in Textured Black Colour.All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Table - T 32 size shall be 900 Width x 590 Depth x 750 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be sq. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS. Also there should be 10 lever cam lock plus handles built in plastic etc.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P Table - T 32 size shall be 900 Width x 590 Depth x 750 Height APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

providing and placing knock down 2 door steel almirah of godrej make slimline or equivalent of dimension 900 x 507 x 1950. with removable skirting,legs attached with screw type leveller , Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Steel Hinged Door. Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. 3 way 90 Degree Removable key type Cam lock & locking mechanism.2 Nos. Of Full Adj.Shelves etc.Colour and designe approved by Engineering in charge etc complete.Specification as Directed by Engineer-in-charge etc,complete. P\P knock down 2 door steel almirah of godrej make of dimension 900 x 507 x 1950 APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

4 Seater PU Coated size shall be the APO 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking All metal components should be pre treated with zinc phosphating in 8 tank porcess and then powder coated with epoxy polyster powder coating. Goods should be supplied in knocked down construction and should have low VOC emission. The work shall be carried as per the instructions of engineer in charge. APPROVED MAKES - WIPRO, GODREJ, HNI. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

Providing and Supplying Customized Perforated Aluminium Miniwave Cladding System of Perforated Aluminium Miniwave wall cladding system with acoustics perforation of wood finish colour consisting of 270 mm wide, 14 mm deep Panels with a 19 mm dia curved construction giving a corrugated construction of panel having length upto 6mtrs roll formed from 0.6 mm thick Aluminium for higher strength and good Roll forming characteristics. Panels shall be secured to the Aluminium substructure of 75mm X 50mm X 2mm RHS pipes at the back by means of screws at a centre-to-centre distance of 1000 mm or as per design and the next panel shall overlap to the previous panel maintaining a uniform corrugation. The panels shall match the architects design to provide for the strip lighting. The panels shall covered with flush profiles on the open edges and skirting at the floor to cover the bottom edge of the panels and shall be with NRC value 0.7 to 0.8. APPROVED MAKES - HUNTER DOUGLAS, SAS, GORDON. Including all leads, lifts transportations, taxes, GST, fixtures & fasteners, scaffolding & installation at various heights, from floor to ceiling as specified in drawings etc. complete.

B. L. MEHTA CONSTRUCTIONS PVT. LTD.

M/S Aditya Construction Company

CMM-RMM Infraprojects (JV)

D. V. Patel and Company

M/s. Vijay Construction

Setubandhan I L and Ms S S Patil and Co JV