Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-AOC DSS 110 GROUND FLOOR SHOPPING COMPLEX SECTOR 15 125001 | HISAR | HARYANA | 125001 | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical NOT ELIGIBLE |
Tender Value
₹4.9 L
EMD Value
₹9,890
Closing Date
3 Nov 2021, 5:00 pmClosed
Executive Engineer Elect. Division PWD B and R Br
Executive Engineer Elect. Division PWD B and R Br., Hisar
CONSTRUCTION OF SNCU BLOCK IN CIVIL HOSPITAL AT TOHANA IN DISTT. FATEHABAD (PDG. E.I INTERNAL ONLY).
2021_HRY_191558_2
ect-GGN/Elect-HSR/100249
Open Tender
Electrical Works
Works
120 days
HISAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
₹9,890
Yes
11 Apr 2022
27 Oct 2021
8 Nov 2021
27 Oct 2021
3 Nov 2021
27 Oct 2021
Amount
23.1.6 : Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 23.6.1. 1 run of Size 1.50 Sqmm(1/1.40mm)
23.6.3: 1 run of Size 4 Sqmm(1/2.24mm)
23.6.6: 2 run of Size 1.50 Sqmm(1/1.40mm)
23.6.8: 2 run of Size 4 Sqmm(1/2.24mm)
23.2: COPPER WIRING WITH MODULAR SWITCHES IN MS CONDUITS (SURFACE/RECESS) 23.2.1: Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. 23.2.1.2. Group B
23.2.2: Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe.23.2.2.2 Group B
23.2.4: Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required. 23.4.2.2. Group B
23.2.5: Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling ,including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required. 23.4.5.2 Group B
23.5: COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS. 23.5.1.2: Wiring only in 1.5 sqmm PVC insulated copper conductor cable for LIGHT/FAN/Call bell point in existing conduit pipe and MS boxes including cost of Bakelite cover for MS box, switch, wall socket, ceiling rose/connector etc. 23.5.1.2 Group B
23.5.2: Wiring only in existing conduit and MS box for Twin control light point with 2 nos , 2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable. 23.5.2.2 Group B
23.5.4: Wiring in existing conduit and MS box for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch etc complete as required. 23.5.4.2 Group B
23.5.5: Wiring in existing conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch etc complete as required. 23.5.2 Group B
23.5.6: Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 23.5.6.1: 1 run of Size 1.50 Sqmm(1/1.40mm)
23.5.6.3: 1 run of Size 4 Sqmm(1/2.24mm)
23.5.6.6: 2 run of Size 1.50 Sqmm(1/1.40mm)
23.5.6.8: 2 run of Size 4 Sqmm(1/2.24mm)
23.7.6: Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. 23.7.6.2 PVC pipe of 25 mm dia.
23.7.6.3: PVC pipe of 32 mm dia.
23.8: FITTING AND ACCESSORIES: 23.8.1 Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect.23.8.1.6 Call bell 220/230 volts musical type
23.8.1.12: Bakelite angle/straight button holder large size.
23.8.10: Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 23.8.10.1: 1 & 2 Modules including combined plate for Telephone and data
23.8.10.2: 3 Modules
23.8.10.3: 4 Modules
23.8.10.5: 8 Modules
23.8.10.6: 12 Modules
23.8.11: Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 23.8.11.1: 5 amp 1 way switch
23.8.11.3: 15 amp 1 way switch
23.8.11.4: 5 amp Socket
23.8.11.5: 15 amp 6 pin Socket
23.8.11.7: step type Fan Regulator 2 modules 300 watt
23.8.11.8: Telephone Socket outlet modular type
23.8.11.9: TV Socket outlet modular type
23.8.11.10: Blanking plate
23.8.11.12: USB Charger, 1000mA, 5V, 1 Module ( For Non residential use only)
23.9: Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work.
23.10: Erection of cabin fan complete with necessary earthling including carriage from PWD store to the site of work.
23.11: Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required
23.12: Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required
23.13: Supply, erection and fixing of 12 mm thick ply wood board having a circular /rectangular hole etc as required including the cost of making hole, nuts and bolts, painting and other petty material with all labour etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work.
23.20: Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required
23.22: MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. 23.22.1: Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 23.22.2.1: MCCB BOX upto 125 Amp FP
23.22.1.3: 4 Pole MCCB 6 amp to 100 Amp 25 KA
23.22.4: Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. 23.22.4.7: TPN DB Horizontal type Double Door 8 way (8 incoming 3 phase * 8 outgoing)
23.22.4.8: TPN DB Horizontal type Double Door 12 way (8 incoming 3 phase * 12 outgoing)
23.22.5: Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 23.22.5.1: 6 amp. to 32 amp Single Pole
23.22.5.4: 40 amp to 63 amp. Double pole
23.22.5.6: 40 amp to 63 amp. MCB's TRIPLE POLE
23.22.5.8: 40 amp to 63 amp. MCB's FOUR POLE
23.23: MISCELLANEOUS: 23.23.1: Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- 23.23.1.3: Size 25 mm dia
23.23.8 : Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 23.23.8.1: 2 pair telephone wire
23.24: MS STAND, BUS BAR CHAMBER AND PANELS: 23.24.1: Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide.
24.1: EARTHING AND LIGHTENING ARRESTOR: 24.1.3: Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.24.1.5: Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode.
24.1.5: Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode.
24.1.7: Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.
24.1.8: Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.
MR: Supply & Errection of 40 W LED batten with aluminium base heat shink complete of Dura Batten 50000 Bussiness Hours, 4600 Lumens. complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work. (Make:- Havell's/ Bajaj/ Crompton. wipro/ Philips).
MR: S/E of indoor commercial recessed mounted LED panel 2'X2' of 42 W of Havell's make & Model Venus /Equilant model of Philips/ Wipro/ Crompton with Fixture size 595x595mm, Invative direct/ indirect luminaire suitable for armstrong/ Grid ceiling with high brightness LEDs and conical de-glaring center panel for effecient downlight completed including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.
MR: Supply of Under Ground LT Power Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 50 Sqmm 3.5 Core Ard. Cable
MR: Supply and errection of Wall fan of size 15" (400 mm) Sweep Platina of Havell's/ Orient/ Crompton make complete in all respect upto the entire satisfaction of the Engineer -in-Charge of the work.
MR: S/E of exhaust fans of 12" (300 mm) approved make complete in all respect. Make:- Havell's/ Orient/ Crompton make.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .